## Scanning The scan was created in large IR-mode with automatic exposure and geometry tracking. I started from the front and slowly moved around the part while keeping an eye on having enough overlap for tracking (rotating the scanner to reach in to the crevices works quite well to circumvent obstructions due to limited line of sight). While scanning the framereate was roughly 10 FPS with some highs to 15 and lows to 6 FPS (NIR mode still needs an update I guess, currently no marker scannign supported). ## Post-Processing For post processing I fused the scan at 1mm and and meshed it it with default settings. For alignment I used the untegrated tooling in Creality Scan (basically rotating the part until alignment is right). The figurine then was printed from PLA to create a minature version.