My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

My personal character FanArt practice & 3Dprint experiment. 

![some gif](http://i.giphy.com/3oz8xzqr3KtMNdKLDi.gif)

- Series [ Love Live! Sunshine!!](http://love-live.wikia.com/wiki/Love_Live!_Sunshine!!)

- Character [Watanabe_You](http://love-live.wikia.com/wiki/Watanabe_You) 

- Costume [Aozora_Jumping_Heart](http://love-live.wikia.com/wiki/Aozora_Jumping_Heart)

[Hi-res 3Dprint files posted on my Thingiverse](http://www.thingiverse.com/thing:1953480) 

- Design to print in 1:6 scale with 0.4mm nozzle. 

- Max clothes thickness are 1.2mm. 

- Use screw and pin to assemble. You can 3Dprint as size ref and buy some at hardware store. 

- [More poses](https://skfb.ly/YxXY)

- Other costumes [01](https://skfb.ly/X8vJ) , [02](https://skfb.ly/VsCU)

- [WIP archives Here](https://www.facebook.com/Johnnie3Dtalk/photos/?tab=album&album_id=1123363244443452) 

- [twitter post](https://twitter.com/wiriyapol/status/806428103215976448)

Yousoro! 青空 Jumping Heart [3Dprint]

Scanned in just 25 minutes with the metrology-grade laser scanner Artec Point, the transmission's fine elements are all captured in this high-res 3D replica. The complex combination of components, from the gear sets to the shifting mechanism, is vividly displayed. 

Despite the transmission's shiny and reflective metallic cast and challenging surface roughness, Artec Point's advanced scanning technology captured all of it. The resulting point cloud was optimized for precision, even with a 0.2mm resolution. For future scans of similarly sized objects, we recommend a resolution of at least 0.4mm to reduce processing time.

This model is ideal for reverse engineering, quality inspection, industrial design, rapid prototyping, and beyond. Zoom in and rotate to take a closer look and experience the power of Artec Point's ultra high-resolution scanning technology.

Scanning time: 25 minutes | Processing time: 2 hours

Transmission

Thorax

"Head of a Bull" 1824 in Marble by Gaetano Monti, Milanese, c. 1750 - 1827
On view at the USA National Gallery of Art, Washington D.C.

Model created with 3DF Zephyr Free and Blender 2.81from Twenty-Two (22) Photos. Captured with a Canon EOS 60D and EF-S 10-22mm 1.35-4.5 USM lense.

Head of a Bull

I've always liked its design :D 

Now he boppin'

Downloadable :)

![rendered](https://images-wixmp-ed30a86b8c4ca887773594c2.wixmp.com/f/27146c3a-d1ad-4304-812f-66aa1defc0e8/deswqqk-62cd0d3c-5014-4658-9f43-1a6eca5ac690.gif?token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ1cm46YXBwOjdlMGQxODg5ODIyNjQzNzNhNWYwZDQxNWVhMGQyNmUwIiwiaXNzIjoidXJuOmFwcDo3ZTBkMTg4OTgyMjY0MzczYTVmMGQ0MTVlYTBkMjZlMCIsIm9iaiI6W1t7InBhdGgiOiJcL2ZcLzI3MTQ2YzNhLWQxYWQtNDMwNC04MTJmLTY2YWExZGVmYzBlOFwvZGVzd3Fxay02MmNkMGQzYy01MDE0LTQ2NTgtOWY0My0xYTZlY2E1YWM2OTAuZ2lmIn1dXSwiYXVkIjpbInVybjpzZXJ2aWNlOmZpbGUuZG93bmxvYWQiXX0.ih3Iy7dQo06BF1mKdrMp1JD-mx-ORRq6CI6yMR2zXwE)

Boppin' Ariados

Renders available on my artstation (artstation.com/artwork/2mmay), including wireframe shots, turntables, etc.
<b></b>
<p></p>
Concept by *Zinkase* (artstation.com/zinkase).

Another scan of the bone which is already in my collection.
Here I tested the new automatic turntable made by 3DMakerPro that is connected to the TOUCAN 3D Scanner.
With 50 frames per aspect and four aspects (scans), the quality of the model is better than 0.2mm regarding the resolution.
In my opinion a very good addition to the scanner.

Cervical vertebra (Toucan + Turntable)

## Scanning
Scanning was done at 2mm target resolution and no scan spray was used. I was to lazy to calibrate the Trackit so some of the surface quality defects may be accountable to this problem. Tracking quality was indicated as poor so time to calibrate. Scan was performed in three parts (could have been two but the first placement of the tracker was suboptimal) and each scan consists of paint brush movements until full data quality was reached.

## Post-Processing
Processing work was minimal by first fusing at 1mm (software even recommended 0.75mm) and then aligning the partial scans to one whole scan. Meshing was done at recommended settings and alignment to the coordinate system with Quicksurface.

Tiled Stove - Revopoint Trackit

Bring a touch of fantasy to your desk with this adorable Tiny Dragon Fledgling! This stylized 3D model features a round, emerald green baby dragon sitting snugly inside a stone-grey eggshell. Designed with 3D printing in mind, it boasts clean lines and optimized geometry to ensure a smooth printing experience with minimal supports. Key Features: - Stylized aesthetic with vibrant scale details and glossy golden horns. - Optimized for both FDM (PLA) and Resin (SLA) printers. - Perfect as a desk companion, gift, or tabletop gaming accessory. Print Settings Recommendations: For FDM printers, we recommend a layer height of 0.12mm to 0.16mm for fine detail. Use a 10-15% infill and tree supports for the chin and horns. For Resin printers, standard settings will capture the intricate scale textures beautifully. This model is a must-have for dragon lovers and collectors of cute 3D printed creatures!

Cute Baby Dragon in Egg - 3D Print Dragonlet

## Scanning
Three scans were done, all in the same setting: Owl placed on turntable with markers around it, marker tracking used and exposure set to ensure no under- or overexposure. All scans were taken until full data quality was reached.  
Scans:
- 0.2mm IR small mode (highest resolution selectable), texture capture enabled
- 0.1mm laser mode, texture capture enabled
- 0.05mm laser mode (high detail capture of the face area, whole bird in 0.05 would result in unusable large scan)

## Post-Processing
No special post-processing was done, only meshing at default settings within Exstar Hub and performing texture optimization.

Wooden Owl Laser 0.1mm - Einstar Rockit

## Scanning
Scanning was done in standalone mode at highest resolution (0.2mm, PC connected can be higher) and until target quality was reached. I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting. The scan itself was performed with all three laser modes taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
I imported the scan project to my PC over USB and then fused the scan at default settings (0.2mm). Afterwards I used Quicksurface to align the scan to the coordinate system.

Wax Casting of Woman - Creality Sermoon P1

## Scanning
For scanning I placed the shell on a bed of marker cards and geometries securing it with blue tack against rolling (which actually caused problems...). The scan itself was created in standalone mode with marker tracking and 0.2mm resolution in laser mode. It tool roughly 7min to reach full data quality on the front side. I also captured the back side but supposedly the blue tack deformed which resulted in the scan being unusable... Next time I wull try clay.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to mesh it in recommended settings (semi-watertight). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Trench Art from WW1 - Einscan Rigil

Wax Casting of Figure - Creality Sermoon P1

Wooden Owl Laser 0.05mm - Einstar Rockit

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other. The laser scans had to be reduced to allow upload to Sketchfab (just under 4M triangles will result in a 100MB ply when exporting from Quicksurface).

Scan Bench - Einscan Rigil IR Large

White Primed Pine - 32mm strings, Aprons and 18mm risers
Oak – 21mm Treads, Oval continuous handrails, base rails
30mm Black metal newel posts. Including landing gallery return balustrade, aprons and cover moulds.
12.5mm Straight and Oval metal spindles alternating.

Bentlsey - 2

Lighthouse is a table lamp that combines elegance,
lunar symbolism, and artisanal tradition. Its luminous
circle evokes the shape of a grain sieve, an ancient
tool from the Sicilian countryside, reinterpreted in a
contemporary key. The soft, diffused light creates
a warm and enveloping atmosphere, perfect for
enhancing any area of the home.

It is ideal for those seeking an elegant decorative
element, with moon references and a design inspired
by Sicilian tradition.
Dimensions: 330x 330x 92mm
Aluminum body: gilver, matte black, grey.*
LED light : integrated , warm white 2700k.
Diffuser discs in 100% recycled PMMA
and recyclable illuminate two sides.
LED technology dimmable 10-100%
On|off button and dimmer on the cable.
*Please check our website for new colors.*Please check
our website for new colors.

Lighthouse lamp - Second-Studio

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other.

Scan Bench - Einscan Rigil IR Small

Wooden Owl IR 0.2mm - Einstar Rockit

Yamaha XJ 650 - 1980
4-stroke, 4-cylinder, air-cooled, transverse engine - 653 cc - 73 hp/9000 rpm - DOHC, chain-driven - 2 valves per cylinder - 4 x 32mm Hitachi vacuum carburetors - electric starter - 5-speed gearbox - shaft drive - double cradle frame - front disc brakes - 108 kg - 198 km/h
My first motorcycle, a gem that unfortunately ended up crashing into a car that cut me off. I was driving without a license or insurance, so no reimbursement! A nostalgic memory!

My First Motorbike Yam 650XJ

Bring a touch of magic to your desk with this adorable, chubby turquoise dragon! This high-quality 3D model features a stylized, round dragon sitting atop a rich pile of golden coins. Designed with a smooth matte texture and large, glossy black eyes, this 'chibi' style creature is perfect for fans of fantasy and cute collectibles. It is fully optimized for both FDM and Resin 3D printing, featuring simplified wings and a sturdy base to ensure a successful print without complex supports. 

Recommended Print Settings: For FDM, use a 0.12mm layer height for fine detail and 15% infill. For Resin, standard settings will capture the smooth skin perfectly. This little guardian makes an excellent gift, a tabletop companion, or a unique piece of home decor. Download the STL files now and start printing your own hoard-guarding dragon!

Chubby Turquoise Dragon on Golden Treasure

Spacer to allow 46-52mm tall battery. Requires 2x M3x40, 1x M3x45 and an M3 lock nut.

TRX-4 Battery Spacer

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/VUperD](https://www.meshy.ai/s/VUperD)

Asset Library

About These Assets