Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

Repositorio de modelos 3D de Ddiaz Design

![](https://www.corazon-world.com/wp-content/uploads/2021/08/VAP1.jpg)

With the concept of " letting people fully enjoy the WRX" and the desire to boldly customize the VA-WRX even further, CORAZON have created the "Sportire Wide Body Kit," an overfender kit that widens the front by approximately 60mm on each side and the rear by approximately 75mm on each side, based on the design concept of "Neo Classic," and venturing into the realm of customization that no one else can venture into.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a CSR2 3d model

2020 CORAZON WRX SPORTIRE WIDE BODY KIT

## Scanning
Scanning was done at 2mm target resolution and no scan spray was used. I was to lazy to calibrate the Trackit so some of the surface quality defects may be accountable to this problem. Tracking quality was indicated as poor so time to calibrate. Scan was performed in three parts (could have been two but the first placement of the tracker was suboptimal) and each scan consists of paint brush movements until full data quality was reached.

## Post-Processing
Processing work was minimal by first fusing at 1mm (software even recommended 0.75mm) and then aligning the partial scans to one whole scan. Meshing was done at recommended settings and alignment to the coordinate system with Quicksurface.

Tiled Stove - Revopoint Trackit

Sway bar link for rc car. Accepts 4.75mm ball.

Rlaarlo Sway Bar Link

For complete workflow compatibility, we recommend downloading the original file.The Converted version is intended for web viewing only. In the original file, the following are fully preserved:✔ full scene structure✔ all materials without simplification✔ proper texture maps✔ proper object namingIf you plan to use this model in production, choose the source file.A75mm 6mm eye eye turnbuckle stretching screw or bottlescrew

Turnbuckle

A new release is coming soon This miniature is part of my last Kickstarter campaign, Mireya of Mistgrove. It was a stretch goal we didn’t reach, so as part of my recent pre-campaign, you can download it for free. A new release 👇 Follow the Kickstarter campaign here 👇 Fairies of Wisperia • 75mm & 32mm scale miantures • Pre-supported • Lychee file included • Personal license You’ll receive STL files for personal use only. Selling, sharing, or distributing the files or prints is not allowed. If you’re interested in selling prints, you can check out the Merchant License in the store.

Mireya of Mistgrove Warrior Bust

This model of a grain of sand is designed to help visually impaired participants understand the concept of magnification. It is part of a wider project called “Make it Visible” which can be used in conjunction with Museum in a Box (https://museuminabox.org/) to allow visually impaired people to explore tactile objects that teach them about natural history. It should be used in conjunction with the accompanying tactile label in this collection.

When printed at 75mm scale along its longest feature, this grain will be 50x larger than life and matches the section of 5pence coin, model: https://sketchfab.com/3d-models/5p-coin-p-scaled-to-14cm-8ded18e2e3bf41fb87ad71df7872c778

There is a matching label: https://sketchfab.com/3d-models/sand-mib-label-63a025b3a1eb45068d1c80e06b840b63

Sand Grain scaled to 75mm

For proper use, we recommend downloading the source format.The converted file is intended for web viewing only. In the original file, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ correct PBR texture maps✔ correct object namesIf you intend to use the asset in a production environment, download the original version.Hexagonal Shovel For 100 115 Angle Grinder 100mm

Asset Library

About These Assets