The T200 Imperial Mech is equipped with two Gatling guns that can fire 80mm rounds. Up to 3 passengers can be seated in the T200 Mech. It has two searchlights that can be controlled from the inside to execute patrols.

> To say thank you to the Sketchfab team for their good work and to celebrate reaching 200 Twitter followers, I created this robot and share it with you as a freebie.
It's rigged, but the hydraulic stamps are based on constrains and they can't be exported from Cinema4D to FBX (I don't know if you can even write constraints in FBX format), so you'll have to reconfigure them yourself, but it shouldn't be hard.

**Additional download data**

* ? [8K Texture: Steel(NoDecals)](https://1drv.ms/u/s!AgdgT5gVYZgYbqOt2ptsRd92qR8)
* ? [8K Texture: Police](https://1drv.ms/u/s!AgdgT5gVYZgYb2H2I5qNbffaUGM)

T200 Dieselpunk Mech - Freebie

Enduro electric mountain bikes are the perfect companions for demanding trails and technical terrain. With 160mm to 180mm of travel, an enduro e-bike confidently tackles steep descents and technical climbs.
Today's modern e-enduro bikes feature powerful and reliable motors. Shimano or Bosch motors are often used for this purpose. Furthermore, the batteries are easily removable and replaceable, ensuring you're always ready for new adventures.
Enduro electric mountain bikes are distinguished primarily by their aggressive geometry, which offers even greater control on descents, allowing you to get the most out of both yourself and your bike.
Illustration: ZIZOU on his SuperBike Enduro 6TMD

Zizou- Electric Bike

The Carl Gustaf 20 mm Pvg m/42 or pansarvärnsgevär m/42 is an anti-tank recoilless rifle chambered in 20×180mmR Bofors. This is the first weapon in the Carl Gustaf recoilless weapon family and later turns into the well-known Carl Gustaf 84 mm recoilless rifle. Designed in 1940-1942, Sweden.

This model come with a ZF-4 scope and a fired cartridge behind the breach.

Carl Gustaf 20 mm Pvg m42 (Low-Poly)

This is the 2017 U6 Concept Car I made based on the VAZ-1111-6 platform. I Made the model in 2026 but the design is inspired by 2017 concept cars. Very Low-poly. The interior isn't shown here, but is minimalist and still carries the VAZ Oka's utalitarian soul and capacity. It's a 5/7 Seater, depending if you wish to sacrifice the trunk or the seats. I know this seems like an EV, but it isn't. the Exhaust is cleverly-hidden underneath (near the axles). 

SPECS!!! For the PowerVehicle 3

- 3L Inline-5 Max. 8100RPM
- DOHC 8-Valve
- 280HP @ 6197 RPM
- 310Nm @ 6100 RPM
- Unleaded-83; 10.1L/100km
- 286G/100km
- Cx/Cd: 0.41
- 0-100km/h: 5.9s
- 10-Speed Automatic Transmission (3.7)
- r17/r17
- All brakes are 180mm Vented Discs (1-piston)
- Max. Speed (NO LIMITER): 258 km/h


I'll provide a couple images to show what this should look like in a scene, but hey, it's your decision. Remix as you wish, but with credit where due and in a visible + ACCESSIBLE part of your project!!!

![](https://imgflip.com/i/aryk4h)

2017 UnitSix PV-III

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-19444.555.1](https://www.online.landessammlungen-noe.at/objects/1516090)

**Material:** Ceramic

**Dimensions:** H.: 220 mm Rim diam.: 180mm

**Dating:** 1050 - 800 BCE

A conical-necked vessel made of light to grey-brown clay. The surface is smoothed and graphited. 
At the base of the vessel's neck, horizontal flutes are present. The vessel's decoration extends from the shoulder area to the belly, comprising vertical sets and individual flutes. In addition, vertical clusters of flutes are observable above the protruding knobs.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Vessel

As a proud Khadoran citizen, I could simply not standby as the incompetent engineers assigned to rebuild the glorious pride of the motherland, BEHEMOTH, struggle to recreate the engineering feat that allowed the monstrous warjack to stride on two legs. Instead, they decided to strap him onto the treads of the AC-10 Bison and call it a day. UNACCEPTABLE. For the Empire I took it upon myself to learn the craft of forging a warjack and after much trial and tribulation my efforts came to fruition. The Behemoth now shakes the earth with each step as he crushes foe with, gun, fist and foot…  ____________________________________________________________________________________________________ I couldn’t stand (and neither could Behemoth 2.0) that the warjack that got me into Khador all those years ago was not living up to his potential in the new version. So between sketchup and teaching myself blender, along with lots of trial and error I am satisfied to share Behemoth’s legs with the world! Big shoutout to Fableforgedprints for printing all the versions and troubleshooting/correcting all my 3d printing mistakes! Be sure to tag me or post if you end up using the legs for your 80mm Behemoth 2.0.

Khador - Behemoth 2 - Legs

i mainly use them for warmachine but they can be used for other game. 30mm, 40mm, 50mm, 80mm, 120mm i recommend using them for FDM

Rounded Bases

Set of hollowed round tabletop bases including: 25mm, 32mm, 40mm, 60mm, 80mm and 100mm variants.  Includes pre-supported files for resin printing.

Round Bases Pack | FREE

It is, as it states, mini ten pin bowling where all the parts pack into the unit (if you only pick one launcher type) and the bottom half slides forward to give you access to all the pins once you have knocked 'em down.  This standard version fits on a 250mm bed diagonally. The Base_180.stl & Top_180.stl fit on a 180mm bed diagonally. All other parts are shared.   There are three turnable launchers to choose from: launcher A is the standard, launcher B provides a little guidance and launcher C gives the biggest helping hand.  The ten pins all printed (two colour) without a brim on my smooth plate, but as they have a small footprint, you might want to employ a brim.  The two ball halves and internal cube fit together tightly. That's on purpose, as then you don't need glue, but if they turn out to be too tight, just run your nail (or a nail file, sandpaper etc) along the cubes edges and it will snap in.Also a good marble will fit the bill nicely if you happen to have one handy.  All parts printed with basic pla, 0.2 layer height, 2 walls, 3 top & bottom layers with a 5% rectilinear infill... Till golden brown (nope, just kidding :)  Fast lane through a hurricane, open road and I'm ready to roll...  --PATREON & PATREON SHOP.--https://www.patreon.com/3DFreeman  Thanks for your continued support :)

Mini Ten Pin Bowling

Free for one week only.  Model will vanish at the end of the week.If you like the model and want permanent access, you can:Buy Individually HERESPECIAL Get the Whole OPR ARMY this model is a part of HERE (Army is an addon for the frontier)  This model comes with both pre-supported and unsupported versions as well as the .lys file for easy support editing in the lychee slicer.  Includes:  - 1 sculpted base  - monster mini  BASE SIZE: 80mm  SCALE: 32mm  SUPPORTED: Yes  For stat-blocks for this model and  more check out our site at: https://direct.me/dragontrapperslodge  Join us on Patreon to receive monthly miniatures sets and an ever-growing welcome pack! Vote on future models as well as join monthly painting contests: patreon.com/dragontrapperslodge

Crystal Muncher  | PRESUPPORTED | Free

Anchor your tabletop shrine with a sculptural eldritch dice tray you can print at home—a shallow octagonal bowl with writhing tentacles and cosmic glyphs that cradle your d20 set in biomechanical horror.

WHAT'S INCLUDED:
• STL file optimized for FDM and resin slicers
• GLB file for 3D viewers and AR preview
• Design scale: 80mm diameter, 100mm base footprint (fits standard Chessex/Wiz Dice d20 sets)
• Sunken central pool anchors dice securely; tentacle bas-relief walls frame the perimeter
• 3–4 faux-Elder-Sign glyphs embossed subtly around the rim

PRINT SETTINGS & COMPATIBILITY:
• Recommended layer height: 0.2mm (FDM), 0.1mm (resin)
• Infill: 15–20% (structural integrity without material waste)
• Support needed: Minimal—geometry includes built-in ramps on tentacle undercuts; no unsupported overhangs
• Minimum wall thickness: 0.8mm throughout; tentacle tendrils taper gracefully to avoid weak points
• Compatible with standard FDM printers (PLA, PETG, resin printers, or dual-extrusion setups)
• Post-processin…

Cthulhu Eldritch Dice Tray STL | Lovecraftian…

Print a sculptural apothecary vial with dramatic silhouette and tactile detail—perfect for tabletop gaming, LARP costume assembly, or shelf display.

This instant digital download includes both STL (for your slicer) and GLB (for AR preview or 3D viewer) files. You get a single-mesh potion bottle optimized for both FDM and resin printing, designed with organic asymmetry and art-deco geometry that reads bold even at thumb-size.

What's included:
• STL file (FDM/resin slicer compatible)
• GLB file (AR preview + viewer compatibility)
• Recommended print scale: 80mm tall (desk display) or scale down to 40mm (tabletop mini)
• Integrated cork stopper cap (print-in-place or separate)
• Recessed label cartouche for custom paint or rune details
• Hollow interior cavity with small drainage hole (optional liquid fill)
• Stable flat circular base—no thin legs or supports needed

Print settings:
FDM: 0.2mm layer height, 15–20% infill, no supports required. Layer lines naturally simulate glass texture.
Resin: 0.05mm layer …

Fantasy Potion Bottle STL | Sculptural…

Mineral specimen Control<br>
Sony a7v, Laowa 180mm. 1/250, f/8, ISO 100.<br><br>

MS_01_26_CONTROL

MS_01_26_CONTROL

rustic distressed wooden basket with rusting handle 500mm x 250mm x 180mm 360mm with handle

Antique Wooden Basket

Place a functional Anubis shrine on your altar, desk, or ritual space — a sculptural bust fused with an integrated offering tray and rear candle cup, ready to print at home on any FDM or resin machine.

WHAT'S INCLUDED
- STL file — pre-supported geometry optimized for slicers (PrusaSlicer, Chitubox, Lychee)
- GLB file — for 3D viewers, AR preview, and reference
- Single-mesh design (no glue required); optional 2–3 part interlocking split available in file notes for beds smaller than 200×200mm
- Recommended print scale: 180mm tall bust with 90mm diameter offering tray base and 25mm rear candle cup sized for standard tea lights

PRINT SETTINGS
- Layer height: 0.2mm FDM / 0.1mm resin
- Infill: 15–20% (gyroid recommended for hollow interior strength)
- Supports: minimal — geometry is support-friendly; rear candle cup and tray underside may benefit from light tree supports in FDM
- Wall thickness: 2–3mm (pre-modeled; do not reduce in slicer)
- Bed size required: 200×200mm minimum
- Compatible printers: FDM (Bambu…

Anubis Altar Shrine STL | Egyptian God Bust…

low poly-ish mech with lightly armored limbs armed with 2 80mm hand cannons. it is piss themed.

Light Assault Mech

Print an asymmetrical elder god crown that doubles as a brooding altar centerpiece or a wearable cosplay prop — the same mesh scales from 80mm tabletop figurine to full 1:1 headpiece without remodeling.

**What's included**
- STL file — slices directly in Cura, PrusaSlicer, Chitubox, or Lychee
- GLB file — open in any 3D viewer, Sketchfab, or AR app for scale reference
- Single static mesh, fully watertight, no loose geometry
- Recommended display scale: 80–150mm tall (tabletop altar prop); print at 100% for a 1:1 wearable crown

**Design detail**
Eight coiling tentacles rise from a ridged Art Deco helmet base. Angular faceted panels interrupt corrugated biomechanical channels — the silhouette reads as alien regalia at any scale. All internal walls are ≥1.2mm for reliable FDM wall perimeters. Overhanging tentacle tips are self-supporting; no breakaway support structures required on the main body.

**Print settings**
- Layer height: 0.2mm FDM / 0.05–0.1mm resin
- Infill: 15% gyroid (display piece); 25%+ if pr…

Cthulhu Tentacle Crown STL | Elder God Helmet…

A sculptural anatomical heart desk model for educators, students, and science enthusiasts who want a clean, display-ready organ piece without the complexity of multi-part kits.

WHAT YOU GET
- One STL file and one GLB file, both optimised for desktop and resin printing
- Approximate print dimensions: 80mm tall x 55mm wide, with an integrated flat circular base approximately 70mm in diameter
- The upper portion of the heart features a planar cross-section cut exposing simplified interior chamber walls, allowing ventricle and atria detail to be viewed without any separate loose parts
- Aorta and pulmonary trunk rendered as short stubbed cylinders for structural resilience during printing and handling
- Single unified mesh — no assembly required

PRINT SETTINGS
- Recommended layer height: 0.1–0.2mm for smooth organic exterior surfaces
- Supports: minimal or none required thanks to the support-friendly silhouette and integrated base
- Compatible with FDM (PLA, PETG, resin-look filaments) and MSLA/resin printers
…

Asset Library

About These Assets