Low Poly Tangara.

The Tangara (an Aboriginal Australian word meaning to go) is a class of electric multiple unit operated by Sydney Trains in Sydney, Australia. The Tangaras were delivered between 1988 and 1995, and are third-generation trains. 

A Tangara is a double-deck four-car set, with the two outer cars being driving control trailers (carrying a D prefix) fitted with one pantograph each and the middle two cars being non-control motor cars (carrying a N prefix). They are equipped with air conditioning and chopper control.

Two subclasses of Tangara were built, the suburban sets targeted as T sets, and outer-suburban sets originally targeted as G sets. The T sets replaced the first generation of Sydney's electric rolling stock. The G sets were converted to suburban use and were re-targeted as additional T sets.

Unlike most other Sydney Trains rolling stock the seats on the suburban T sets are fixed, meaning that half the seats face backwards.

Tangara Sydney Trains T set

The Barbie universe has only its own rules, and there are no Harleys :)
---

Barbie-Davidson Chopper Bike

Model from - Traffic Rider<br>
Modified to Barbie style by Alex.Ka.<br>
10/07/2023

💗Barbie-Davidson💗

Hunter Chopper with realistic size and 2 cockpits for Pilot and Gunner
This is a model from Half-life 2 with minor changes, made specifically for the Ravenfield mod

Hunter Chopper Modded (Half-Life 2)

Chopper in cyberpunk style. What else can I write here?

Moto in cyberpunk style

HALF-LIFE 2 / HL2

Vehicles included:
Hunter Chopper
& APC
& Prisoner Transport

HL2 CMB Mix Vehicles 1 (RIGGED)

HALF-LIFE 2 / HL2

Vehicles included:
Hunter Chopper

HL2 CMB Air Vehicles 1 (RIGGED)

A recreation of the allerting communicators of america Cyclone 120.

This is a 120 Decibel air raid siren compared to the later ACA cyclone 125. The cyclone 120 includes the superbanshee base and the Penetrator 50 back cone half as that half is simply the top of this siren and if you align the two models I've made, you will see this is true. This version includes a almost completely designspark chopper and my Banshee 110 Motor.

UHH I DO TEH SAIRENS SO YOU KAN REKEWEST SUME IF YUE WEANT.

ACA Cyclone 120

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/7KUQCc](https://www.meshy.ai/s/7KUQCc)

Blue  Chopper

A recreation of the Federal Signal 500 siren which comes in many configurations with this model being 8/12 port and sourcing my chopper from my model 2.

The other version I built has the cone like intake and a bigger chopper. This siren was produced in the late 1950s and sported a 8/12, 9/12,         8 - 12(DHTT), 8, 12 and 10/12 port configurations with there also being a dual horn two tone (DHTT), single horn two tone (SHTT) or single horn (SH) and they later were renamed BT, AT, A. 

This is a recreation of the non-cone intake federal 500 siren.

Federal Signal 500AT/SHTT

I've started taking time and designing almost entire sirens in designspark mechanical and then fixing issues in 3d builder and I have also been adding crap tons of detail to them too.

   A recreation of the TableRock alerting systems or sentry siren Inc. 40v2t vertical siren with a 10 port (bottom) 15 port (top) ratio (10/15). this version I made has the proper sentry siren specs all the way and also includes the legs on the inside, the chopper specs, and the two motors like the 16v1t-b/16v-1t siren.

Sentry 40v2t

A redone version of my American singal corperation Tempest 135 air raid siren.

So apparently I saw this photo from a video of someone's t135 in a backyard and the entier 'flower' or horn arangement is cut in half for this futuristic metal 'block' that takes all 8 horns and routes them directly to the chopper compared to the t-128

This siren is capable of 133.5 decibels at 100 feet and is the older brother to the ASC T1128

ASC T-135 Redone

A recreation of the RCM controller or RCMA controller which allows for individual control of the chopper, blower, and rotator of the siren all with individual controllers and an agistat timer inside.

The RCM works by using three speperate motor relays in order to individually control sections of the siren. Eg: Chopper, Blower,. These devices and their individual relays allow people to manually test only one or all specific pieces of the siren.

Federal signal RCM

I redid the Allerting communicators of america Allertor 125 siren and the only thing that I redid was the entire front housing. I made the whole front in designspark mechanical and I also redid the hurricane 130 MKI including the entire rotator, the housing was also entirely redone in DSM and I made the maintenence cover for it aswell.

I think my new MKI chopper is super accurate and I might try 3d printing these things.

ACA Allertor Redone

For production-ready use, we recommend downloading the source format.The viewer version is intended for web viewing only. In the original file, the following are fully preserved:✔ original scene hierarchy✔ complete materials without reduction✔ correct PBR texture maps✔ proper object namingIf you plan to use this model in production, choose the original version.Bell uh1 b military chopper with lots of details and PBR material

Helicopter

A recreation of the common mans siren.

JK!!!! This is a recreation of the Federal signal Special DualTone or Special Duty or Something else; 10 horsepower. This is a 10 horepower siren as previously stated, and commonly sports a 9/12 chopper. This version I made i think is 8/12 but IDK.

Anyways these are too common in LA along with the federal 500

Federal Signal SD-10

A recreation of the Allerting Communicators Of America (ACA) Screamer S-2, 8 port small-ish size siren with 2 slightly compressed top shrouds.

The chopper is from my scream master 115 and so are the shrouds as this was a quick 1 minute remake/rebuild of my old screamer shrouds to make it look more realistic as more of my sirens will be made fully in designspark and more detail added later in 3d builder, or for it to be pieced togather in 3d builder.

ACA Screamer S-2

Chopper the Reindeer

A Growling signal of a federal signal Model 5-7 air raid siren.

This animation includes the chopper rotation and realistic movement of the siren like a moving lower shroud and a shifting air raid siren as a whole.

Model 5 Growl

I created these antlers to go along with the Tony Tony Chopper cosplay hat that I designed. If you would like to make your own hat I do have a build video and Free foam templates over on my Youtube channel https://youtu.be/rbauHkApJMs

Tony Tony Chopper Cosplay Antlers SKS Props 

A re-recreation of the prototype "toob" ACA hurricane 130 siren which was simply an ACA hurricane 130 MKI with an extended tup chopper housing and the MKI chopper.

This siren is extreemly rare and the main photos I could find of it were the DeKalb, IL aca hurricane 130 MK"0" pictures. Even those are rare!

This is toe 8/10 port version.

Asset Library

About These Assets