This is a 3D animation ("Shelly") of a near-adult loggerhead (ID=982.000406129037) sea turtle (*Caretta caretta*, straight carapace length=86 cm) that was initially captured on June 23, 2017 by the Inwater Research Group, and then photgraphed with the Beastcam technology with 20 Canon G16 cameras.  Photographer Christine Shepard operated the cameras and the sea turtle was released that same day in good condition.  The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin  used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 47A - Loggerhead Sea Turtle

This is a 3D model of Bakari, a **Southern Right Rhino** (Ceratotherium simum) from **Perth Zoo**, Western Australia, which was initially scanned using an array of 20 Canon G16 cameras.  CG artist **Jer Bot** used the open source 3D animation software **Blender** (blender.org) to fully reconstruct the rhino. The mass of the Rhino is 2225 kg and its length is 2.1 meters. Reference photos were also used as a guide to create taxonomic features onto the 3D model using Blender's sculpting tools.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 56A - Southern White Rhino

Sculpting and texturing practice

https://www.instagram.com/myname_eugene/?hl=ru
https://www.artstation.com/artwork/Z55G0X
https://vk.com/geneugene3d

#rock #stone #crystal #colorful #lowpoly
# normal

Crystal stone (rock)

This is an animation (“Mar”) of a hatchling Hawksbill (ID Ei1801) sea turtle (*Eretmochelys imbricata*, straight carapace length 11.8 cm) that was initially rescued by the Loggerhead MarineLife Center, and then photographed with the Beastcam technology with 30 Canon G16 cameras. The sea turtle was released soon after in good condition. The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 50A - Hawksbill Sea Turtle

This is an animation of an adult female **Great Hammerhead Shark** (Sphyrna mokarran) that was reconstructed from multiple cameras arranged around a dive in South Bimini, Bahamas in February 2020.  Casey Sapp coordinated all videography.  Kevin Davidson kindly contributed useful reference photos.

CG artist **Jer Bot** used the software Blender to align these camera views to reconstruct the accurate shape and color of **Nemesis** (PIT tag 900236000107365), which had an estimated length of 329 cm based on laser photogrammetry.  Nemesis commonly frequents dive spots near Bimini and is well-known to divers and scientists from the Bimini shark lab (www.biminisharklab.com).

The **ANGARI Foundation** (www.angari.org) coordinated and supported this research, along with Sean Williams, Ken Morton, Jonathan and Jameson Bayuk, Annabelle Brooks, and Vital Heim.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 73A - Great Hammerhead Shark

This is a 3D animation of a large adult Timber rattlesnake (*Crotalus horridus*) from New England Reptile Distributors (https://new-england-reptile.myshopify.com/). 

The raw photogrammetry scan was created using the Beastcam Technology, and the ventral side was added from a different snake.  The full model was retopologized and rigged by animator Daniel Daye from the University of Massachusetts at Amherst.

The 3D model was created with the Beastcam technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 31A - Timber Rattlesnake

This is a 3D model of a subadult Caribbean Reef Shark (Carcharhinus perezi) that was modeled after a shark swimming underwater with the OceanX and Cape Eleuthera Institute team in January 2019.  Divers captured video of this shark swimming, and artist Robert Gutierrez used Blender and preexisting shark data to recreate this individual.  As this model was recreated from photos and other data, we make no claim that it perfectly reflects an actual shark, but we have strived to be as anatomically correct as possible.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 54A - Caribbean Reef Shark

This is a 3D animation of a Blacktip shark (*Carcharhinus limbatus*, ID 730) captured in April 2016 in collaboration with the Discovery Channel and Dr. Neil Hammerschlag at the Universiy of Miami.  The shark was captured, photographed with the Beastcam technology, and released unharmed.  3D artist Robert Gutierrez converted the raw photogrammetry scan to this low-poly model, as well as animated it.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 9A - Blacktip Shark

This is a 3D animation ("Scallywag") of a juvenile green sea turtle (ID=CM1648) (*Chelonia mydas*) that was captured on December 23, 2016 by the Loggerhead MarineLife Center at Blowing Rocks Preserve.  The turtle was attacked by a shark, but survived.  It was photographed with the Beastcam technology with 20 Canon G16 cameras by Christine Shepard.

The 3D model was initially created through a photogrammetry scan using Capturing Reality.  Animator Jer Bot used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center provided feedback on the movements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 46A - Subadult Green Sea Turtle

This is a 3D animation of a Southern Right Whale (Eubalaena australis, Panel C, Fig. 1) which was reconstructed using the open source software Blender 3D (blender.org). Measurements taken from drone videos of right whales (see Christensen et al. 2019) were used to create an ellipsoid that served as a basis for the model. The measurements for height and width of the whale were taken at increments of 5% of the total body length. Reference photos were also used as a guide to create taxonomic features onto the ellipsoid using Blender 3D sculpting tools (primarily the dynamic topology function). These features included the fluke, pectoral fins, eye, and mouth arrangements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 55A - Southern Right Whale

NAD-TP1-GENERIQUE-H22

This is my 1st project of the 2nd semester at NAD school.
Lowpoly windmill and small shack textured with generic and atlas material. (6490 triangles)
I took some of the texture at wonderfull https://share-legacy.substance3d.com/. Thanks to all the texture artistes that gave those materials on this website so I could explore further options on substance painter.
I'm gratefull for what I've learned during this super fun project, especially about optimisation and generic texture.

Like/follow/comment/hug/kiss/do something if you download plz
xox

Windmill (game ready)

*Style3D*

   - This is a model created by Style3D Atelier. You can freely modify the clothing through Atelier and match it with your model. 

   - It can be applied in various production scenarios like movies, animations, games, etc., saving time in clothing model creation and enhancing simulation effects.

   - If you need other formats, you can download Style3D Atelier software and visit the official marketplace. It has over 4000 clothing models, covering all categories.

   - You can freely export to formats like fbx, obj, abc, usd, gltf, glb, etc. Also, you can export it in SMD format in Atelier and perform real-time simulation in UE using the Style3D Simulator plugin.

Official website :

   - Style3D Atelier (Professional clothing model creation) - https://atelier.style3d.com/en
    
   - Style3D Simulator (UE plugin for real-time clothing simulation) -https://simulator.style3d.com/en

Includes :

   - UV

   - textures(normal map, diffuse map, roughness map, SSS map, and specular map)

Man Black Business Suit

This is an animation of an subadult Atlantic Sturgeon.

This 3D model is a composite of images from a subadult Atlantic Sturgeon  (Acipenser oxyrhynchus oxyrhynchus) housed at the Maymont Nature Center (https://maymont.org/animals/nature-center/), and a scan from a preserved Atlantic Sturgeon from the Natural History Collection at the University of Massachusetts at Amherst (https://bcrc.bio.umass.edu/nhc/home).

CG artists Jer Bot, Johnson Martin and Robert Gutierrez used Blender to reconstruct the full fish from these scans and images, as well as animate the movements. Thanks to the Maymont Nature Center, the Richard Lewis Media Group (http://rlmg.com/), and the Natural History Collection for facilitating the work.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 66A - Atlantic Sturgeon

This is a 3D model  of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60A - Cyprus Racer Snake

This is the biggest model I have posted in Sketchfab, that could make it slow to load. This model of the masterchief monument - executed by French sculptor Aimé-Jules Dalou, is made from almost 500 photos of 24 MPixel (taken from the ground) with ContextCapture, the photogrammetry software of Acute3D, Bentley Systems. I did not retouch the mesh, only cropped it, remove texture, made ambient occlusion in Meshlab, used lighting of Sketchfab.

The 3D model with texture can be viewed here: http://goo.gl/HURMmB

For information about this monument, I refer you to the wiki page (in French) which can be translated in English with Google translation: https://fr.wikipedia.org/wiki/Le_Triomphe_de_la_République. 

A heavily downsampled model of this model, which is downloadable is here : https://skfb.ly/JS8x

Place de la Nation-The Triumphe of the Republic

This is an animation of a juvenile (straight minimum carapace length = 27.5 cm, mass = 3.0 kg) green sea turtle (Chelonia mydas) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Inwater Research Group during an in-water assessment to gain valuable insights into the demographics of this threatened species.  The turtle was in good health and released back into the wild.  A CG artist (Johnson Martin) reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 72B - Juvenile Green Sea Turtle

3D-Scan of the Peirene Fountain (https://openheritage3d.org/project.php?id=h3r7-t916) and reduced to just 70k polygones.

Ancient Corinth - Peirene Fountain

This is a 3D model ("Mary") of an adult (curved carapace length 940 mm) female flatback sea turtle (Natator depressus, PIT tag 900119000520197, captured 11/21/17, Thevenard Island, Western Australia) as part of the Department of Biodiversity, Conservation and Attractions' North West Shelf Flatback Turtle Conservation Program (DBCA-NWSFTCP) with Scott Whiting (DBCA), Sabrina Fossette (DBCA) and Adrian Gleiss (Murdoch University). The turtle was photographed on a nesting beach using the Beastcam system and released in good condition. The 3D model was created through a photogrammetry scan using COLMAP and Autodesk REMAKE. Animator Jer Bot used Blender to reconstruct the sea turtle. Credit should be given to the Digital Life project and NWSFTCP: “The author(s) acknowledge the Digital Life project and the Department of Biodiversity, Conservation and Attractions’ North West Shelf Flatback Turtle Conservation Program for creation of the 3D flatback turtle model”.

Inquire about licensing: **www.digitallife3d.org**.

Model 53A - Flatback Sea Turtle

This is an animation of a juvenile (straight minimum carapace length = 75.1 mm, mass = 72.8 g, age=20 days) Leatherback sea turtle (Dermochelys coriacea) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Jeanette Wyneken (Florida Atlantic University) for her research on leatherback ecology and development, and the model was created in collaboration with the Upwell Non-Profit (https://www.upwell.org/).  CG artist Johnson Martin reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 74A - Juvenile Leatherback Sea Turtle

This is a 3D model of a female Bottlenose dolphin (“Poli”) from Honduras (Tursiops truncatus) which was re-created from photographs and other information provided by the staff at the Roatan Institute for Marine Sciences (RIMS) at Anthony’s Key Resort in Roatan, Honduras.  Mass is 147 kg; Total length (TL) is 241 cm.

CG artists Johnson Martin and Robert Gutierrez reconstructed this individual dolphin from photographs and other information using the open-access software Blender.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 61A - Bottlenose Dolphin

This is a 3D model of a Marine Toad (*Rhinella	marina*) captured in Labo Phillipines in May 2016. 

This 3D model was created with a single Mark III Canon camera and a 100 mm lens by walking around the subject.  Funding from an NSF grant (1353743) to C. Siler, P. Bergmann, G. Wagner and D. J. Irschick supported construction of this model.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 6 - Marine Toad on Leaf

My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

This is a 3D model of a male of the jumping spider Habronattus pyrrithrix. CG artist Johnson Martin created this model in Blender using photos, video, and a CT-scan. Nate Morehouse from the University of Cincinnati and Beth Jakob, Skye Long and Daniel Daye from the University of Massachusetts at Amherst provided access to photos, videos, and specimens.  Philip Steinhoff from the Uhl Lab at the University of Greifswald allowed us to use a CT-scan to recreate the body mesh. CG artist Jer Bot helped with creation of the 3D body mesh.

Creation of this model was supported by an NSF grant to Nate Morehouse at the University of Cincinnati (NSF IOS-1734291).

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 63A - Jumping Spider - Resting pose

Happy birthday Leah, as text says if you jump in the water.  I had to try out sketchfabs new feature/add on for blender. Remix of ...
@pizzaguyty @MGDFilms @DigitalLife3D @seenoise

Asset Library

About These Assets