Part of the remains of Crouch End Station, London. 

"The station building was located on the road bridge over the railway but only small parts remain of the structure today."
https://en.wikipedia.org/wiki/Crouch_End_railway_station

In this photogrammetry capture can be seen the road bridge over the railway and a small section of the surviving platforms. The railway track bed is now a popular footpath called Parkland Walk.

2821 photos taken in May 2022 with a Sony a7R III and processed in Reality Capture.

Crouch End Station

You can download the city van design for free. I created 90% of the design myself; I combined the remaining small parts using components I downloaded from the Thingiverse website.

Midibus (city bus type) vehicle design

   1/200 Yamato Battleship for static and RC model step file for 3D printing  ・Total length: 131cm・Full width: 19cm・Total height: 26cm  Large parts printed in FDMSmall parts printed in SLA  I used ABS for hull, but PETG is Ok  Material: PETG, ABSLayer: 0.2Wall: 4Top/Bottom: 5Infill: 15%  Can be painted or coated with epoxy on the outside → 100% waterproof   

1/200 Scale IJN Yamato-Class Battleship –  3D Step file for printing ( RC and static )

This unique action figure is based off of the hollow knight's main character: the knight. The knight has little to no real action figures so I made one myself.Features:1x Main torso piece1x Torso connecting piece1x Lower body2x Shoulder joints2x Arms with hole (for sword)2x Legs1x Head  By purchasing this file, you agree not to sell, redistribute, or otherwise share the contents of this product. This is for personal use only.You may not mass-produce or sell the 3D-printed object.  3D printing settingsI used PETG filament for this figure, I cannot guarantee successful prints using other materials  There are no multicolor files5% infill for head15% for everything else.I usually use tree supports as they are easier to take apart.  If print file is too small, feel free to resize it. (I made it 20% larger for my final one)  This model was designed for FDM 3D-printing and is not designed for Resin printing.  Attention: This figure is not suitable for small children or pets, it contains small parts that pose a choking hazard if misplaced or broken off during play. Not recommended for children under 3 years of age

Hollow knight articulated figure

This unique action figure is based off of the hollow knight's main character: the knight. The knight has little to no real action figures so I made one myself.Features:1x Main torso piece1x Torso connecting piece1x Lower body2x Shoulder joints2x Arms with hole (for sword)2x Legs1x Head By purchasing this file, you agree not to sell, redistribute, or otherwise share the contents of this product. This is for personal use only.You may not mass-produce or sell the 3D-printed object. 3D printing settingsI used PETG filament for this figure, I cannot guarantee successful prints using other materials There are no multicolor files5% infill for head15% for everything else.I usually use tree supports as they are easier to take apart. If print file is too small, feel free to resize it. (I made it 20% larger for my final one) This model was designed for FDM 3D-printing and is not designed for Resin printing. Attention: This figure is not suitable for small children or pets, it contains small parts that pose a choking hazard if misplaced or broken off during play. Not recommended for children under 3 years of age

Hollow knight Action Figure

This 3D printable Tic Tac Toe game (also known as Xs and Os) is a classic two-player strategy game that's perfect for passing time, entertaining kids, or as a travel companion. The design includes a game board and movable pieces that fit neatly into the board for storage. How to Play: - Players take turns placing their mark (X or O) in a 3x3 grid. - The first player to get three marks in a row (horizontal, vertical, or diagonal) wins. - If all nine squares are filled with no winner, the game ends in a draw. Features: - Complete set: game board + 5 X pieces + 5 O pieces. - Pieces slide or press-fit into place (no loose small parts). - Compact and portable — great for travel, car rides, or waiting rooms. - Optional magnetic version (add small magnets). - No supports required for printing. Design Variations (optional): - Board with recessed slots to hold pieces securely. - Drawer or storage compartment underneath. - Keychain-sized mini version. - Customizable with different shapes or colors. Printing Recommendations: - Material: PLA or PETG - Layer height: 0.2 mm - Infill: 15–20% (board), 100% (pieces for strength) - Supports: Not needed - Colors: Print X pieces in one color, O pieces in another Assembly: - No assembly required for one-piece designs. - For magnetic version: glue small 5x2mm magnets into pre-designed holes.

Tic Tac Toe

Small Parts Drawer Divider

Asset Library

About These Assets