I had made the model of a hand to test some Blender shaders, and wanted to do a realistic texturing of it afterwards, so I took the opportunity to do a hand rig and learn some more. Here it is.

Rigged hand

*Bellver Castle is a Gothic-style castle on a hill 3 km to the west of the center of Palma on the Island of Majorca, Balearic Islands, Spain. It was built in the 14th century for King James II of Majorca, and is one of the few circular castles in Europe. First serving as the residence of the Kings of Majorca, and afterward long used as a military prison throughout the 18th to mid-20th century, * https://en.wikipedia.org/wiki/Bellver_Castle

Experimental, reconstructed from various 4K drone footage only

Bellver castle

Final exam project at school. I decided to make this boi going through the whole process from Zbrush to Maya for UVs and retopology, rigging with mixamo and edited in Cinema 4D with some tweaks done in Blender afterwards. You can see the drawings I made before and used as reference [here](https://www.artstation.com/artwork/oO5Lok). The rig isn't perfect, but it should work well enough for some animations or games.

Edit: I've updated the model with better visemes that should work well in VRChat. Can't guarantee anything though as I'm still pretty new to the whole 3D character thing.

DefectiveFox

A bridge spanning the "jasper green pond" in the southern part of the "Garden of Heavenly Peace" in Bethmannpark in Frankfurt am Main.  
430 photos were taken with a Nikon D5000. The model was created in RealityCapture and edited in Blender.  
To save time, photos were taken only from one side of the bridge and this was mirrored afterwards.  
Due to strong weather changes during the photographing and not quite optimal settings of the camera, the quality of the textures did not meet my expectations.

Bridge of the Half Boat (Chinese Bridge)

A serpent is angry at a pesky knight. 

It was sculpted in MasterpieceVR, touched up in Blender, textured in Substance Painter, and painted over in Photoshop afterward.

![](https://cdna.artstation.com/p/assets/images/images/008/922/420/large/morgan-morrell-frewen-serpent3.jpg?1516119163)

Laser Breath

*RNLB Jane Anne* is  an important survivor from Irvine's past, and a rare example of its type in Scotland. It's a double-ended, self-righting, pulling and sailing lifeboat, which was based at  the town's  RNLI station. It was manned mainly by the locally renowned Sinclair family and participated in seven rescues, saving  12 lives.

Built in 1898 by the Thomas Ironworks Co. in Millwall, London, *Jane Anne* began operating out of Irvine shortly afterwards and remained in use there until the station closed in 1914.
The boat's design meant it was open to the elements and relied entirely on the muscle power the crew who rowed it. The special construction of the hull, using diagonal cross planking, made it very strong with the enclosed ends providing buoyancy and ensuring that the crew is safe even in bad weather.


The model was created as a part of 'Scanning The Horizon' 3D Digitisation Project.

We would like to thank [Leica Geosystems](http://leica-geosystems.com/en-gb) for their help during this project.

RNLB Jane Anne

## Scanning
Scanning was done in sPC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 20M triangle file...) until target quality was reached. Keep an eye on ideal scan distance since it reduces with increasing point distance. When you are too far away scanning will be drastically slower compared to when you're in the ideal distance. 

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wax Statue Virgin Mary - Einscan Rigil

## Scanning
Scanning was done in PC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 20M triangle file...) until target quality was reached.
I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting which I also use for aligning the two scans I created (top and bottom). The scan itself was performed with both cross and parallel line mode taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wax Casting Traditional Scene - Einscan Rigil

## Scanning
Scanning was done in standalone mode at highest resolution (0.2mm, PC connected can be higher) and until target quality was reached. I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting. The scan itself was performed with all three laser modes taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
I imported the scan project to my PC over USB and then fused the scan at default settings (0.2mm). Afterwards I used Quicksurface to align the scan to the coordinate system.

Wax Casting of Woman - Creality Sermoon P1

## Scanning
Scanning was done in PC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 15M triangle file...) until target quality was reached. Keep an eye on ideal scan distance since it reduces with increasing point distance.
I placed the statue on bed of marker cards and geometries so I can also capture the sides of the statue which I also use for aligning the two scans I created (top and bottom). The scan itself was performed with both cross and parallel line mode taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wood Statue Boy with Dog - Einscan Rigil

## Scanning
For scanning I placed the shell on a bed of marker cards and geometries securing it with blue tack against rolling (which actually caused problems...). The scan itself was created in standalone mode with marker tracking and 0.2mm resolution in laser mode. It tool roughly 7min to reach full data quality on the front side. I also captured the back side but supposedly the blue tack deformed which resulted in the scan being unusable... Next time I wull try clay.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to mesh it in recommended settings (semi-watertight). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Trench Art from WW1 - Einscan Rigil

Wax Casting of Figure - Creality Sermoon P1

This is the final Prototype Base Model for Bloodless Chica. I will work on the final prototype base, then i will combine the two. Afterwards, I will make the Official Model. If you have any ideas that you would like me to add to it, feel free to write them in the comments below.

Bloodless Chica: Final Prototype

## Scanning
Scanning was done in PC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 15M triangle file...) until target quality was reache
I placed the statue on bed of marker cards and geometries so I can also capture the sides of the statue which I also use for aligning the two scans I created (top and bottom). The scan itself was performed with both cross and parallel line mode taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wood Statue of Bird Nest - Einscan Rigil

## Scanning
Scanning was done in sPC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 20M triangle file...) until target quality was reached.
I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting which I also use for aligning the two scans I created (top and bottom). The scan itself was performed with both cross and parallel line mode taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wax Portrait Virgin Mary - Einscan Rigil

This AC from Armored Core 2 is another rage version from the intro. That's what makes it valuable, while the build itself is rather mediocre, but that didn't stop some people from trying it out. One of them was Agatha Prendergast, who decided to become a Raven after the events of ParaNorman, so to speak, to change her career. Ironically, on her very first mission, she encountered one of the seven witnesses—that same disgruntled old woman—and not just one, but the rest of the gang—the same witnesses the Egis had betrayed. Life teaches them nothing, after all. This time, Agatha decided not to play it safe and give these bastards a fight. She wasn't very successful, of course, but she still managed to defeat a couple of ACs, though in the end, she almost got beaten up by the remaining bastards, barely escaping that mess alive. She used this build several times afterward, then rebuilt it and continued her new career. We wish her the best of luck.

Armored Core 2 Another Rage AC OP Ver

Zeena (ジーナ Jīna?) is a character that appears in the Sonic the Hedgehog series. She is a Zeti and the sole female member of the Deadly Six, serving as the group's information manager as well as handling secretarial duties alongside her usual workload.[4] When Dr. Eggman came to the Lost Hex, Zeena and the other members of the Deadly Six were forced into serving him due to the effects of a Cacophonic Conch he found. After Sonic the Hedgehog arrived and got rid of the conch, Zeena and the others rebelled against the doctor and took control of his forces. Afterwards, Zeena followed Zavok's plans to make her and the other Deadly Six stronger by using Dr. Eggman's Extractor while destroying Earth, but was ultimately defeated by Sonic, though not for good.

Sonic Lost World - Zeena

Zazz (ザズ Zazu?) is a character that appears in the Sonic the Hedgehog series. He is a Zeti and a member of the Deadly Six, being the group's combatant in charge of special attack operations.[5] When Dr. Eggman came to the Lost Hex, Zazz and the other members of the Deadly Six were forced into serving him due to the effects of a Cacophonic Conch he found. After Sonic arrived and got rid of the conch, Zazz and the others rebelled against the doctor and took control of his forces. Afterwards, Zazz followed Zavok's plans to make him and the other Deadly Six stronger by using Dr. Eggman's Extractor while destroying the Earth, but was ultimately defeated by Sonic, though not for good.

Sonic Lost World -  Zazz

Zomom (ゾモン Zomon?) is a character that appears in the Sonic the Hedgehog series. He is a Zeti and a member of the Deadly Six, being the group's saboteur. When Dr. Eggman came to the Lost Hex, Zomom and the other members of the Deadly Six were forced into serving him due to the effects of a Cacophonic Conch he found. After Sonic the Hedgehog arrived and got rid of the conch, Zomom and the others rebelled against the doctor and took control of his forces. Afterwards, Zomom followed Zavok's plans to make him and the other Deadly Six stronger, by using Eggman's Extractor while destroying the Earth, but was ultimately defeated by Sonic, though not for good.

Sonic Lost World - Zomom

This is a M4 Modular Kit I have put together with different parts for customisation.
I might update some geometry/texture in the future.

This was  created in Blender through hardops/boxcutter/textools, with the plan to use it in Unreal afterwards.
I aimed for a high level of detail on the gun and trying to keep a reasonable polycount (hopefully it should be between 30 and 50k tris dependings on setup used).

Each part has its own texture set with different resolution depending on the mesh size (with the exceptions of the triggers that are contained within the body texture) for I hope better performance in game with limitting texture streaming, but keep in mind that the textures are still quite heavy.

This is free to download and use, crediting is always very appreciated.

Update:
Added FBX.

Free - M4 Modular Kit Gun

For production-ready use, we recommend downloading the original file.The Converted version is intended exclusively for browser preview. In the Original format, the following are fully preserved:✔ original scene hierarchy✔ unsimplified materials✔ correct PBR texture maps✔ proper object namingIf you are going to integrate the model into a project, choose the original version.As the name suggest a large rock I found on the beach. The asset is photoscanned and optimized a bit afterwards.

Beach Rock Large

Statue of St. Scholastica at the Baroque Way of the Cross in Heiligenkreuz. The sandstone figures located there were created starting in 1731.
	
St. Scholastica (c. 480–547) was the twin sister of Benedict of Nursia and, like him, lived her life entirely in the spirit of the Christian faith. She founded a community of women near Montecassino and is considered a pioneer of the Benedictine nuns. According to tradition, she met her brother once a year for spiritual discussions; at their last meeting, a sudden thunderstorm prevented him from leaving after Scholastica had prayed for a longer stay together. Shortly afterwards, she died, and Benedict saw in a vision her soul ascending to heaven like a dove. Her feast day is February 10.

Hl. Scholastika

Master Zik (マスタージーク Masutā Jīku?) is a character that appears in the Sonic the Hedgehog series. He is a Zeti, the founder and oldest member of the Deadly Six and the teacher of Zavok.[4] When Dr. Eggman came to the Lost Hex, Master Zik and the other members of the Deadly Six were forced into serving him due to the effects of a Cacophonic Conch he found. After Sonic the Hedgehog arrived and got rid of the conch, Master Zik and the others rebelled against the doctor and took control of his forces. Afterwards, Master Zik followed Zavok's plans to make him and the other Deadly Six stronger, by using Dr. Eggman's Extractor while destroying the Earth, but was ultimately defeated by Sonic, though not for good.

Sonic Lost World - Zik

I was part of a project where we were staging the site of a car crash and the Paramedics afterwards. This is one of the assets I made for that project.
Modelled in Maya 2018

Asset Library

About These Assets