Smithsonian source data on the Interior of the Command Module can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c63e8a-4ebc-11ea-b77f-2e728ce88125)
and the Exterior of the Command Module can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c6457e-4ebc-11ea-b77f-2e728ce88125)

This media file is in the public domain (free of copyright restrictions). You can copy, modify, and distribute this work without contacting the Smithsonian. For more information and to review the 3D disclaimer, visit the Smithsonian’s [Terms of Use](https://www.si.edu/Termsofuse) page.

Manufacturer: North American Rockwell  

Materials: Primary Materials: Aluminum alloy, Stainless steel, Titanium

Dimensions: Overall: 8'11" ×12'10", 9130lb. (271.8×391.2cm, 4141.3kg), Other: 1'10" (55.9cm), Support(at base width): 12'10" (391.2cm), Overall capsule on stand height: 10'9"
    Support(Stand): 2035.7kg (4488lb.)
    
Credit Line: Transferred from the National Aeronautics and Space Administration

Apollo 11 Command Module (Combined)

The Nissan GT-R is a high-performance sports car and grand tourer produced by Nissan, which was unveiled in 2007. It is the successor to the Skyline GT-R, although no longer part of the Skyline range itself, that name now being used for Nissan's luxury-sport market.

Special edition forged alloys by RAYS in 20-inch size are included. The standard GT-R's aluminium trunk lid is swapped out for a full carbon fibre panel and additional spot welds and adhesive help strengthen the chassis. A front splitter with carbon fibre air ducts up front add to the special NISMO full aerodynamic package, while a large racing style carbon wing completes the rear.

Credits:
> D3NK

Nissan GT-R

*Many thanks to the support generously provided by Meredith Siegfried Madden and Dr. Peter Madden.  Without you this wouldn't be possible.*

Smithsonian source data can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c636ce-4ebc-11ea-b77f-2e728ce88125)

This media file is in the public domain (free of copyright restrictions). You can copy, modify, and distribute this work without contacting the Smithsonian. For more information and to review the 3D disclaimer, visit the Smithsonian’s [Terms of Use](https://www.si.edu/Termsofuse) page.

Orbiter, Space Shuttle, OV-103, Discovery

Manufacturer: Rockwell International Corporation  

Materials: Airframe: aluminum alloys, titanium, Surface: silica tiles, reinforced carbon carbon RCC nose cap and wing leading edges, Interior: many materials (aluminum, fabric, beta cloth, velcro, etc.)

Dimensions: Overall: 24.314m x 17.768m x 38.03m, 73176.5kg (78 ft. x 57 ft. x 122 ft., 161325lb.)
    
EDAN-URL: edanmdm:nasm_A20120325000

Orbiter Space Shuttle OV-103 Discovery

**Modułowa szklana balustrada - system Perfect Line III.**
Aluminum and glass balustrade system - Perfect Line III.

Balustrada Perfect Line III

A drink can (or beverage can) is a metal container designed to hold a fixed portion of liquid such as carbonated soft drinks, alcoholic drinks, fruit juices, teas, herbal teas, energy drinks, etc. Drink cans are made of aluminium (75% of worldwide production) or tin-plated steel (25% worldwide production). Worldwide production for all drink cans is approximately 370 billion cans per year worldwide.


I have a Patreon Join now! :https://www.patreon.com/user?u=14434838

Soda Cans

A pack of various different corrugated sheet metal. Different types of metal, shape and levels of damage. Comes with the base 3 sheets with no damage so you can make your own :) 

Types of sheet metal:
-Old/used iron
-Painted steel (Red, blue, yellow)
-Rusted aluminium
-Heavily corroded metal

UV mapped and textured, 2K Textures. 

Includes:
FBX - Damaged sheets (Seen in viewer)
Maya.Ascii - Damaged sheets (Seen in viewer)
FBX - Base sheets geometry

Damaged Corrugated Sheets Pack

The Camber aluminum window radiator is built of number of curved sections. An important feature of aluminum is rate at which it transfers heat. Thermal efficiency, strength and corrosion resistance, these are the key advantages of Camber radiator. Wide range of colors lets the radiator to blend in with the surroundings or makes it an original interior decoration.<br>
[Learn more](http://en.termaheat.com/grzejnik/camber)<br><br>
Podokienny grzejnik aluminiowy Camber zbudowany jest z szeregu łukowatych żeberek. Ważną cechą aluminium jest szybkość nagrzewania się i oddawania ciepła, co sprzyja szybkiemu nagrzewaniu pomieszczenia. Wydajność cieplna, wytrzymałość i odporność na korozję to kluczowe zalety grzejnika Camber. Duży wybór kolorów pozwala wtopić grzejnik w otoczenie lub uczynić z niego oryginalną ozdobę wnętrza.<br>
[Dowiedz się więcej](https://www.termaheat.pl/grzejnik/camber)

CAMBER radiator

Smithsonian source data can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c62e5e-4ebc-11ea-b77f-2e728ce88125)

This media file is in the public domain (free of copyright restrictions). You can copy, modify, and distribute this work without contacting the Smithsonian. For more information and to review the 3D disclaimer, visit the Smithsonian’s [Terms of Use](https://www.si.edu/Termsofuse) page.

1903 Wright Flyer

Materials: Airframe: Wood Fabric, Covering: Muslin Engine, Crankcase: Aluminum

Dimensions: Wingspan: 12.3 m (40 ft 4 in), Length: 6.4 m (21 ft 1 in), Height: 2.8 m (9 ft 4 in),   Weight: Empty, 274 kg (605 lb), Gross, 341 kg (750 lb)

Type: CRAFT-Aircraft

Country of Origin: United States of America

Date: 1903

Credit Line: The Estate of Orville Wright.

Inventory Number: A19610048000

EDAN-URL: edanmdm:nasm_A19610048000

1903 Wright Flyer

Smithsonian source data on the Interior of the Command Module can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c63e8a-4ebc-11ea-b77f-2e728ce88125)
and the Exterior of the Command Module can be found [here](https://ids.si.edu/ids/media_view?id=3d_package:d8c6457e-4ebc-11ea-b77f-2e728ce88125)

This media file is in the public domain (free of copyright restrictions). You can copy, modify, and distribute this work without contacting the Smithsonian. For more information and to review the 3D disclaimer, visit the Smithsonian’s [Terms of Use](https://www.si.edu/Termsofuse) page.

Manufacturer: North American Rockwell  

Materials: Primary Materials: Aluminum alloy, Stainless steel, Titanium

Dimensions: Overall: 8'11" ×12'10", 9130lb. (271.8×391.2cm, 4141.3kg), Other: 1'10" (55.9cm), Support(at base width): 12'10" (391.2cm) Overall capsule on stand height: 10'9", Support(Stand): 2035.7kg (4488lb.)
    
Credit Line: Transferred from the National Aeronautics and Space Administration

Apollo 11 Command Module Interior

Repositorio de modelos 3D de Ddiaz Design

![](https://assets.dyler.com/uploads/cars/208546/4616792/medium_5df058a3-b0a2-42f3-aae6-4054714ac52d.jpeg)

The E9 BMW 3.0 CSL unveiled in 1971 at the Geneva Motor Show was a special homologation built to make the car eligible for racing in the European Touring Car Championship.

The ‘L’ in BMW designation usually denotes ‘long’ but in the case of the 3.0 CSL, it meant leicht (light) The weight loss was achieved by manufacturing the unit body in a thinner steel, and using aluminium for the bonnet, doors and boot lid. Perspex was used for the side windows and much of the trim and sound proofing was removed. This all equalled a 200kg weight saving over the standard car.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a Need For Speed Mobile 3d model

Credits: https://www.facebook.com/p/GM25-100042237200164/

1973 BMW 3.0 CSL RHD (E9)

Repositorio de modelos 3D de Ddiaz Design

![](https://www.completecar.ie/img/testdrives/10794_large.jpg)

The GR Yaris is built on a unique platform, combining Toyota's new GA-B platform (which debuted on the new generation Yaris hatchback) and a rear section adapted from the GA-C platform used for the Corolla and C-HR. The rally team emphasised the importance of light weight and this is reflected in the use of aluminium body panels and a forged carbon composite roof in the body structure, and scrutiny of how weight could be reduced in parts throughout the car.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a CSR2 3d model

Credits: ZD 3D Modelling and Design Discord Server (discord.gg/ZwWHzxk2zu)

2021 Toyota GR Yaris

The 2010 Bugatti Veyron isn’t just a car—it’s a statement wrapped in carbon fiber and fueled by audacity. With an 8.0-liter quad-turbo W16 engine churning out 1,001 horsepower, it shattered supercar norms by hitting 253 mph, making it the world’s fastest production car at the time. 

Yet, despite its monstrous performance, the Veyron remains surprisingly refined—cruising comfortably on highways like a luxury GT before unleashing its fury on demand. Hand-built in Molsheim, France, each Veyron blends bespoke craftsmanship with engineering excess: think polished aluminum, hand-stitched leather, and a price tag that rivals real estate. It’s over-the-top, yes—but in the best possible way. 

The 2010 Veyron isn’t just about speed; it’s about proving that “impossible” is just another engineering challenge.

Low Poly Car - Bugatti Veyron 2010

Model from BeamNG.drive mod (Unsure of creator)
The Top Gear Geoff Electric Car is a deliberately shoddy, home‑built experimental EV created by Jeremy Clarkson, Richard Hammond, and James May as a comedic rival to the G‑Wiz in Series 14, Episode 2 of Top Gear. Improvised from a milk float chassis, scrap body panels, and an electric motor powered by two scavenged batteries, it was designed as much to mock early eco‑cars as to test the trio’s ability to “save the planet” with their own zero‑emissions vehicle.
Geoff’s  is a tall, boxy, almost Jeep‑like shape clad in flat aluminium sheet, with crude panel gaps, awkward proportions, and minimal attention to aerodynamics or comfort. Its reflective metal body gives it a harsh, unfinished look, while the cramped, upright cabin forced the team to literally bolt on a raised “roof box” so Hammond could sit inside without hitting his head. There is almost no ventilation, little sound insulation, and the interir feels more like a hastily built shed than a finished car.

Top Gear Geoff Electric Car

Completely redesigned, here is the TUB H Super 4×4 XTREME-R 2026, a high-performance off-roader.

Curb weight: 2,700 kg, Towing capacity: 3,500 kg
Body: High-strength steel + lightweight aluminum
Engine: Type: High-end Mitsubishi turbocharged diesel engine
Architecture: High-performance V8, Displacement: ~3.2 L – 5.0 L
Maximum power: ~310–390 hp. (230–290 kW)
Maximum torque: ~900–1,100 Nm, Injection: High-pressure common-rail
Turbo: Twin-turbocharger with variable geometry
Emissions standard: Euro 6d-Final / equivalent
Cooling: High-flow intercooler
Transmission: 10-speed automatic (with manual and sport modes)
All-wheel drive: Permanent 4x4: 0–100 km/h: ~6.8–7.5 s
Top speed: ~220 km/h.
Here, the Citroën/Mitsubishi technician presents his prototype!

TUB4X4-H Super Mitsu- Citron- Optim20P100

High-detail 3D scan of an aluminum mountain bike front fork, created for accurate geometry reference and reverse engineering workflows.

The side surfaces have been automatically closed, and openings are present around the center section. These areas were intentionally left unmodeled, as they were not required for the reverse engineering of the specific fork component this scan was created for.

This approach ensures an efficient and clean dataset while preserving all critical geometric features needed for analysis, inspection, and downstream engineering use.

Suitable for:
• Reverse engineering
• Mechanical and industrial design
• Bicycle component analysis
• Reference and visualization purposes

Captured from a real-world object using 3D scanning and photogrammetry techniques.

More info: www.3dscanserviceamsterdam.nl

MTB Aluminum Front Fork – 3D Scan Model

A 2026 technical study of the Lamborghini Temerario, the 920CV "Fuoriclasse" successor to the Huracán. This iteration, built under the Defiance-Void Protocol, utilizes a Nero Granatus (#0D0208) finish—a deep obsidian that reveals a blood-red metallic pulse only under direct light.

The chassis is an all-new Aluminum Spaceframe with a 20% increase in torsional stiffness, rendered here with Exposed Forged Carbon aero-flickers and hexagonal daytime running lights. The heart of the machine is a twin-turbo V8 that screams to a 10,000 RPM redline, illuminated in the engine bay by an Institutional Gold heat-shielding. The interior is a focused, "Feel Like a Pilot" sanctuary, stripped of traditional colors in favor of Obsidian Alcantara and Soft Lavender (#E6E6FA) telemetry displays, featuring the designer's signature laser-etched on the carbon sills: "I would like death rather than defeat.

TEMERARIO - DEFIANCE-VOID

A rugged vintage 1970s portable hacking terminal made of brushed aluminum panels in faded beige, featuring scratches, worn edges, and visible screws. Thick industrial casing with dark metal side brackets bolted on. Deep-set convex CRT screen with a thick black rubber bezel, glowing warm amber with a white cube icon and faint system text blurred by CRT bloom and scanlines. Compact mechanical keyboard with aged gray keycaps, some yellowed, and red and orange accent keys. Realistic grime, dust in seams, subtle edge wear. Cinematic warm lighting, isolated neutral gradient background, ultra-detailed 8K photorealistic 3D render.

Portable hacking terminal made of aluminum

Original Model: "2027 Toyota GR GT - Low Poly" (https://skfb.ly/pGKGq) Credits to mrg700 for the model. 


*es un futuro superdeportivo híbrido de alto rendimiento, desarrollado por GAZOO Racing con enfoque en competición, que se espera para 2026-2027. Equipará un motor V8 biturbo delantero con sistema híbrido, superando los 650 CV y 320 km/h, con una estructura de aluminio diseñada para máxima rigidez y aerodinámica.

Motor y Rendimiento: Motor 4.0L V8 Biturbo en configuración "Hot V" (turbos entre bancadas) combinado con un sistema híbrido, superando los 650 caballos de fuerza y 850 Nm de torque.
Diseño y Estructura: Diseñado primero por aerodinámica (enfoque inverso). Cuenta con un chasis de aluminio de alta rigidez y paneles de fibra de carbono para reducir peso.

Lanzamiento y Precio: Se anticipa su llegada entre 2026 y 2027, con un precio estimado de entre $200,000 y $300,000 USD, compitiendo con marcas como Porsche. 

(piezas separadas en Prisma3D)

2026 2027 -  Toyota GR GT Forza Edition

Lighthouse is a table lamp that combines elegance,
lunar symbolism, and artisanal tradition. Its luminous
circle evokes the shape of a grain sieve, an ancient
tool from the Sicilian countryside, reinterpreted in a
contemporary key. The soft, diffused light creates
a warm and enveloping atmosphere, perfect for
enhancing any area of the home.

It is ideal for those seeking an elegant decorative
element, with moon references and a design inspired
by Sicilian tradition.
Dimensions: 330x 330x 92mm
Aluminum body: gilver, matte black, grey.*
LED light : integrated , warm white 2700k.
Diffuser discs in 100% recycled PMMA
and recyclable illuminate two sides.
LED technology dimmable 10-100%
On|off button and dimmer on the cable.
*Please check our website for new colors.*Please check
our website for new colors.

Lighthouse lamp - Second-Studio

Lighthouse Mini is a refined table lamp designed to
enhance bedroom environments, extending beyond
the conventional role of a bedside lamp. It elegantly
integrates onto shelves, desks, or sideboards in
living areas and studies, delivering evocative and
customizable illumination.
The silhouette, inspired by the human form, evokes the
image of a figure engaged in reading, transforming light
into a subtle, narrative element. Its ability to adopt three
distinct positions ensures consistently unique lighting,
ideal for creating varied and personalized atmospheres.
Crafted from a painted aluminium cylinder illuminated
on two sides and supported by a cone with a solid
oval base in solid wood, Lighthouse Mini blends
contemporary aesthetics with premium materials for
functional, distinctive furnishings.

Lighthouse Mini_Second-Studio,designer I.Iacono

An experimental table inspired by the coral, structured like the geometry of the coral, techno-art design language, made with cast aluminum, produced in a public space, oversized, high detail industrial design photography.

Coral Canopy

This is a high-quality 3D model of a Diet Coke can, created with attention to realistic proportions, clean topology, and accurate detailing. The model features a smooth cylindrical structure along with a well-defined top section, including the pull tab and opening area. The overall geometry is optimized to maintain both visual quality and performance, making it suitable for real-time applications as well as high-resolution renders.

The texture work has been carefully designed to match the original look of a Diet Coke can, including crisp typography, vibrant red elements, and a subtle metallic finish. Special focus has been given to achieving a realistic material response, especially in lighting conditions, to replicate the reflective surface of aluminum. This makes the model ideal for product visualization, close-up shots, and branding presentations.

Diet coke can

For proper use, we recommend downloading the original file.The converted file is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ native scene structure✔ all materials without simplification✔ accurate texture maps✔ proper object namingIf you plan to use this model in production, select the original version.A moderne aluminium window handle

Window Handle

For production-ready use, we recommend downloading the source format.The viewer version is intended exclusively for browser preview. In the Original format, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ proper texture maps✔ correct object namesIf you are going to integrate the model into a project, select the original version.Chair with wooden frame die casted aluminum ring and fabric seat.

Asset Library

About These Assets