**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

The Great Drawing Room has the most sumptuous interior in the house. It was a setting for entertaining, music and dancing. The room is inspired by the magnificent [Baroque](https://en.wikipedia.org/wiki/Baroque) style of the late 17th century. This style provided a suitable opulent backdrop for big parties.

![](https://i.imgur.com/jva4GKy.jpg)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Great Drawing Room

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

On festive occasions the gentlemen sat here after dinner, smoking cigars and talking. On regular days, however, this was the family sitting room, where they gathered to drink coffee and play board games in the evenings.

The smoking room is inspired by the [Orient](https://goo.gl/pDNk9v). It was common in the late 19th century to decorate with oriental features and the room is typical for the ideals of the time. The style is associated with [colonialism](https://goo.gl/epxUNw) and militarism and was therefore considered to be appropriate for a room for gentlemen. The walls are clad in silk which was meant to give the room a feeling of an officer's tent.

![](https://goo.gl/sDhsJy)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Smoking Room

This is a 3D model of Bakari, a **Southern Right Rhino** (Ceratotherium simum) from **Perth Zoo**, Western Australia, which was initially scanned using an array of 20 Canon G16 cameras.  CG artist **Jer Bot** used the open source 3D animation software **Blender** (blender.org) to fully reconstruct the rhino. The mass of the Rhino is 2225 kg and its length is 2.1 meters. Reference photos were also used as a guide to create taxonomic features onto the 3D model using Blender's sculpting tools.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 56A - Southern White Rhino

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

This was intended as a room for socialising for gentlemen. Those who did not participate in the game could watch from the wall-mounted bench.

The Billiards Room, like [The Dining Room](https://skfb.ly/6uLDI), is done in  a style between [Renaissance](https://goo.gl/9XS59E) and early [Baroque](https://goo.gl/BVsvH2). Note that the windows in both rooms are made up from round antique [lights that have been framed in lead](https://goo.gl/G86YdL).

![](https://goo.gl/vq8wcr)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Billiards Room

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

In this room Wilhelmina received callers and attended to her correspondence, something that was an important part of a family's networking.

It was common to display family portraits in this type of room. There are portraits of the Hallwyl daughters, great grandchildren and sons-in-law. 

The Morning Room was one of the reception rooms that were used daily, along with [the Dining Room](https://skfb.ly/6uLDI) and the Smoking Room (link coming soon).

![](https://goo.gl/UUgzJE)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Morning Room

**Welcome to [The Hallwyl Museum](https://goo.gl/qbZSY4) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

The Vestibule was the main entrance where both the Hallwyls and their guests entered the house. When you walk up the stairs you will see portraits of mainly Walther von Hallwyl´s ancestors. 

The portraits here date from the 16th to the 19th century. Walther and Wilhelmina inherited the portraits along with the family's main seat, the medieval castle [Schloss Hallwil](https://goo.gl/dsWmoe) in Switzerland. 

As they wanted to leave the castle with all its furnishings intact the ancestral portraits were copied by the artist [Julius Kronberg](https://goo.gl/PS1hEg). The originals were sent back to Switzerland when the Stockholm house was bequeathed to the Swedish state. 

![](https://i.imgur.com/mAilg0r.jpg)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Upper Vestibule

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

This room features the main part of Wilhelmina von Hallwyl’s collection of antique arms and armour.

The collection, typical of its period, focuses on arms for hunting and finely decorated pieces.

The weapons are hung according to their various categories, such as firearms, suits of armour and white-arms, and arranged in neat patterns. 

The esthetical experience of the room and its objects was important.

![](https://goo.gl/24GdE6)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Armoury

300,000 to 600,000 YA. The Homo erectus skull Peking Man is also known as Pithecanthropus pekinensis (Sinanthropus). The gray coloration indicates areas that were sculpted based on the original fragments. This scan was made as a collaborative effort between The Ohio State University [Department of Anthropology](https://anthropology.osu.edu/), the [Office of Distance Education and eLearning](https://odee.osu.edu/), and the [Department of Art](https://art.osu.edu/).

Captured with a Canon EOS camera array and processed/edited in Agisoft Photoscan.

This scan was produced in 2017 the 3D scanning lab, created and run by Andrew Frueh, in the Department of Art at The Ohio State University.

Homo erectus Skull

**Welcome to [The Hallwyl Museum](https://goo.gl/qbZSY4) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

Walther and Wilhelmina took their daily meals in The Dining Room as well as when entertaining. They were often three at the table, as the lady's companion Ida Uhse dined with them. On festive occasions the table would be set for more people. The table could be extended and seat about [30 guests](https://goo.gl/Tpf7i2).

The reception rooms are all decorated in the historicist manner, meaning that the rooms are inspired by different historical periods. The Dining Room is decorated in the [Baroque](https://goo.gl/sTMdAC) style. It is a somber style suitable  for formal dinners. 

The walls are panelled in oak with details of [black bog oak](https://goo.gl/G2SLhm).

![](https://goo.gl/DRHgDF)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Dining Room

Making progress on underwater scenes ( but still more to come :) ) !

[Original scan](https://skfb.ly/6suDz) from @ariosgeo, and inspiration from [Il Cristo degli Abissi](https://goo.gl/RU5PtJ), a submerged statue of Jesus in Italy.

**Modeling**:

* The scan was remeshed with [mmgs](http://mmgtools.org) from 500k verts to 7k, keeping the face and hands at a higher resolution.
* The ocean surface and ground were created with blender's ocean modifier.
* Light shafts are simply a randomized array of elongated planes.
* The fish is a lowpoly model ( a 30s model ).
* A particle system was created for fish instances, with force fields applied (boids physics, vortex, attraction force and collision on the statue)

**Texturing/lighting**:

* Mix of concrete and coral on the statue
* Sand on the ground
* Nothing on the sea surface
* Radial opacity for ground and surface
* Voronoi textures baked as emission on the statue and the ground, to simulate the light deformation through water
* Lots of color processing

Christ of the Abyss

A Blender scene containing Backrooms components to create unlimited Backrooms designs/environments. Contains scalable walls, carpet and ceiling components. Textures were created in Blender and converted to jpgs

Walls (white brick & Backrooms wallpapered) Should be edited in EDIT mode with ‘Correct Face Attributes’ selected in the options menu to maintain the correct texture scale. (see video)

The floor (carpet, two types) should be scaled in edit mode to maintain the correct texture scale. (see video)

Kit includes: 
Scaleable walls (which can be scaled to create pillars/columns) 
Scaleable carpet (two types) 
Air conditioner vents. 
Ceiling lights (emission shaders - for Cycles renders) 
Ceiling tile (use array modifier to create whole ceilings) 
Ceiling tile with AC vent

Youtube video demo.
https://youtu.be/CFNtyszl-_U

and a Youtube video created using the kit to create a Backrooms VHS clip:

https://youtu.be/-p123qNeVD8

Backrooms Blender Kit

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

After a formal dinner, the ladies would retire to the small drawing room for drinks and conversation. The room was only used on special occasions; normally the doors would have been closed.

The room is based on a 1760s [Rococo](https://goo.gl/Uymjmm) interior at the manor house Äs, one of several country homes that belonged to the Hallwyl family. In the late 19th century, the style was considered feminine, with its soft, curvaceous forms. It was therefore suitable for a ladies’ drawing room or boudoir. 

In a grand home at the turn of the 20th century, rooms were generally gender separated. Some of the interiors were designed for the ladies, and others for men.

![](https://i.imgur.com/4bwdMxM.jpg)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Small Drawing Room

This is a 3D model  of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60A - Cyprus Racer Snake

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**
Once the home of [Walther](https://hallwylskamuseet.se/en/) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

In The Serving Room the [footmen](https://goo.gl/9r5oY3) polished silver and put the last touches to the dishes before they were served.
The Serving Room is connected to the basement floor kitchen via the back stairs, a lift and a dumbwaiter. There were separate stairs and passages for the servants so that the work could run smoothly and at the same time not be visible in the grand rooms.
The threshold between this room and the dining room marked an invisible border between the family’s domain and the servants' areas; a border that should not be crossed casually. The servants’ work spaces should be respected. This also applied to the owner of the house.

![](https://i.imgur.com/N7N03Is.jpg)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Serving Room

An array of morph targets for a cartoony head. The base mesh is in the top left.

Head Expressions

A quick model practising array modifier and a little bit of sculpting, it's free and you can use it whenever you wants! 
Follow me on social media and tag me if you want.
Texture from Textures . com
Thanks for all the likes!

Barbed Wire

Made this road pack in blender and substance painter, its suppose to align for array and spline usage but never tested it

Road pack (not including the road)

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**

Once the home of [Walther](https://goo.gl/79nUeT) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

This room was built for Wilhelmina von Hallwyl's collection of European porcelain. Almost all manufacturers of porcelain in the 18th and early 19th century are represented here. The collection consists of more than 500 objects, with pieces from [Meissen](https://goo.gl/jZbQ7q), [Sèvres](https://goo.gl/zUohNG) and [Wedgwood](https://goo.gl/RN1WRm), to name a few.

The collection contains both service sets and figurines. It gives us a good overview of the production of the period in general. In this way it deviates from many contemporary collections that often focused on one category of objects.

![](https://goo.gl/vqUiX3)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Porcelain Room

This is a 3D model of a **Sling tailed Agama lizard** (*Stellagama stellio cypriaca*) scanned using the Beastcam MACRO on a live lizard in Cyprus. The mass of the lizard is 78 grams. CG artist **Jer Bot** retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos.  The construction of this model is part of the post-doc research of Dr. **Savvas Zotos** (POST-DOC/0916/0034)(https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 59A - Sling Tailed Agama

One day during my MRT commute, the tunnel lights were switched on. This is my rendition of the view I had that evening. That was like last month, real life be  kicking my butt really hard.

Animation is achieved by rotating a curved array of tunnel segments around a point (Inspired by some other entries I had found previously).

Modelled in Blender and textured in Substance Painter. Free to download but its really nothing fancy :)

Lights Shining in Darkness

**A wooden electrical power line pole made for use with game engines such as Unreal or Unity. Can be easily used with an array or spline modifier to repeat it along a specified path. Low poly and can be reduced even further. Compatible with Nanite in UE5. **

Features: 
Model is fully textured with all materials applied. 
All textures and materials are included and mapped in every format. 
No part-name confusion when importing several models into a scene. 
No cleaning up necessary just drop your model into the scene and start rendering. 
No special plugin needed to open scene. 
File does not include the lights, any backgrounds or scenes used in preview images.

File Formats:
FBX + Materials

Textures format:
.png

If you like this model please give it a like. 🙂⭐️

Made with love by tiedtke.

Thank you!

Electrical Powerline Pole (Free Asset)

*Made with Blender 2.9 - Free download ;-)*

**DESIGN :** The design of this motorcycle was inspired by that of PUBG which was made for the a very well known video game. obviously, the design is not exactly identical, but it was based on this one…

**MODELIZATION :** The model was entirely made with Blender 2.9, many “modifications” were used, Bevel, Subdivision surface, Miror, Array, Curve, Edge split, as well as the Plugin Bool tool, (Available on Blender base), which has to be applied, Sketchfab does not recognize.

**TEXTURES :** The models were textured on Blender, no need for other software, a lot of textures were provided, in 2K, you can always change them for more textures, click here:
https: https://freestocktextures.com/

Based on a "Rieju MRT 50cc" made by Niilo Poutanen : https://sketchfab.com/3d-models/rieju-mrt-50cc-d42b119cac5f4592883c0c2658205e54

NB: The sketchfab rendering may be different from that of Blender.

For more models click here (everything is free !!) :
https://sketchfab.com/3Duae

( FREE ) SDC Snowbike Motor

Exercise for CG Cookie's "Modeling with Modifiers" course. Assignment was to create a wheel with spokes/tire/rim, using modifiers where possible.

The spokes, spoke caps, rim, and tire made heavy use of the Mirror, Array, and Subsurf modifiers.

Punching the holes in the axle for the spokes was done with a Boolean modifier, which...I will probably never do again. Getting the topology to be clean enough for subsurf to work correctly after the Boolean modifier was applied required me to practically rebuild the whole thing from scratch. Maybe I just don't know how to use Booleans correctly. Maybe I need better techniques for retopo work. Likely both. :)

Overall, a fun and challenging modeling exercise!

Bicycle Wheel

The MM-003 is designed to function in space with various use cases such as space station assembly, satellite maintenance, space-junk cleanup, asteroid mining, and cargo transportation.

This vehicle was manufactured by the Oscillator Space Company (OSC) with a custom cockpit to protect the pilot from solar radiation, a rear habitat module, and three arms for a large array of tasks.

Asset Library

About These Assets