This model is featured in the official Sketchfab VR app:

[![](https://forum.sketchfab.com/uploads/db4890/original/2X/5/5a2e2dbd86ddcbce1cad8fb53aefc0a7cc0506c3.jpg)](https://sketchfab.com/virtual-reality)

This building at Skara Brae, Sandwick, Orkney dates from the late Neolithic (c.2900-2400 cal BC) and was the home to stone age farmers . This structure, known as House 1, was discovered after a storm in 1850.  The local laird William Watt excavated this building in the 1850s and1860s discovering a wealth of stone and bone tools.  

Following erosion in the 1920s a defensive sea wall was constructed and Prof. Vere Gordon Childe undertook further excavations.

The walls of this building survive over two metres high and the stone furniture remains in place.   A hearh lies at the centre of the building and a large 'dresser' faces the one metre high door.  The boxes around the sides of the room are bed compartments, which would have been lined with animal skins.  The small stone boxes were used for storage.

Neolithic House, Skara Brae, Orkney

Segmentation of a human skull plus 4 vertebrae from CT-scan of living person.

Full Skull

The potto (*Perodicticus potto*) is a small (30–40cm) species of primate closely related to lorises and lemurs that inhabits the rainforest canopies of tropical Africa. The potto is nocturnal and feeds mostly on fruit, but has strong jaws that enable it to eat tree gums that are too tough for many other animals; around 10% of its diet consists of insects. 

Whilst moving it is usually very quiet, but has few natural predators as large carnivorous mammals cannot reach the forest canopy, and co-occurring birds of prey hunt during the day. If threatened, the potto can use its specially sharpened and elongated neck vertebrae to butt at an opponent. 

This specimen forms part of the Lapworth’s Humphreys Collection. Digitisation was carried out using an Artec Spider 3D scanner by Rachel Kruft Welton.

Potto Skull BIRUG 18612

House 2 is a Late Neolithic (c.3000-2500 cal BC) building at Skara Brae, Sandwick, Orkney.  The walls of this building survive over 2m high as it was buried by a sand-dune.

For more information on Skara Brae visit CANMORE: https://canmore.org.uk/site/1663/skara-brae

Skara Brae, Orkney. House 2

One of the largest sauropod dinosaurs found in China, its fossil was found at the crossing of MaMingXi in Yibin City. It is identified as sauropod subfamily. The total length of this genus is about 22 meters and the body height is nearly 7 meters. Its neck is very long, equivalent to half of its body length. It not only forms the length of each cervical vertebrae, but also has 19 cervical vertebrae, which is the most common species of sauropods. In addition, the neck is the longest of all dinosaurs (up to 12.1 meters). Compared with the cervical spine, the dorsal, sacral and caudal vertebrae are relatively less.

Mamen River Dragon

This is a three-dimensional animation of an adult female Great White shark (*Carcharodon carcharias*) created in collaboration with the Save Our Seas Foundation. The 3D model was constructed as a composite adult female specimen from various open-access images and images and video provided by saveourseas (www.sharkcentre.com).

CG artist Johnson Martin used the images, video and morphometric data to reconstruct this model and the movement, with assistance from Josh Medina, Braedon Fedderson and Emma Hsiao. Funding for this project was provided by the Save Our Seas Foundation.  We thank Clova Mabin and James Lea for working with us on this project.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org.**

Model 92A - Great White Shark

Extracted with Unity Asset Explorer
 
 The Reefback leviathan, or just the Reefback, is a large leviathan class organism which is very strange in its biology, having evolved drastically to survive attacks from now extinct predators. Often, the reefbacks can become centuries old, and have many species of coral and plants grow on its back, putting their roots into deep scars in the large chitonous back. The creature evolved this back, asbits just one chitonous large bone like structure, as opposed to the other evolutionary paths of a spine with multiple vertibrae. The Reefback has large fina that look like claws, but actually control where the creature turns. The reefback will produce booming calls and songs like earth whales, using 2 large mouths on its sides, which also filter microorganisms from the water. The bottom also has blue bioluminescent stripes, and a collection of enzyme pods, which have no real purpose. Often, resources can be found on its back.
 
 Asset made by UnknownWorlds devs of Subnautica

Reefback

The Mill of Benholm is a water-powered Category A (Grade I) listed historic Mill in a beautiful and peaceful setting of the historic Mill site with adjacent registered ancient Woodland the Mill Brae Woods.

The ‘Mill of Benholm Enterprise (SCIO)’ is the charity safeguarding the Mill of Benholm for generations to come by using the site sustainable as a community hub and community garden, but also developing the Mill into a visitor attraction.

Situated within the conservation area of Benholm near the coastal village of Johnshaven, Aberdeenshire. A restoration of the Mill was completed in 1995. 

The mill buildings are not only Category A listed, but also described by Historic Environment Scotland as ‘an exceptional and rare survival’.

The Mill of Benholm comprises of the mill with the waterwheel and kiln, the former miller’s house and byre, a mill pond all in a beautiful and peaceful setting with approx. 7 acres of land, orchards and gardens and a cafe.

Benholm Mill, Johnshaven, Scotland

Mini Brae Sauna

Hangar Embraer

Titanoboa is a genus of extinct giant boid snake that lived during the middle and late Paleocene epoch. Titanoboa was first discovered in the early 2000s by members of the Smithsonian Tropical Research Institute, which–along with students from the University of Florida–recovered 186 fossils of Titanoboa from the Cerrejón coal mines in the La Guajira department of northeastern Colombia. It was named and described in 2009 as Titanoboa cerrejonensis, and lauded as the largest snake ever found at that time. The original type material consisted of thoracic vertebrae and ribs, but later expeditions collected parts of the skull and teeth.

Titanoboa Cerrejonensis

Cervical Vertebrae

Collectie Museum Plantin Moretus

Houten pers voor koperplaten met beweegbare wagen, drukcilinder en kruisvormige draaiboom, klein model. Bezit van Hendrik Leys (1815-1869). Later in gebruik genomen door zijn neef en leerling Henri De Braekeleer (1840-1888)

datering: 19e eeuw

inventarisnummer: MPM.V.V.03.4.001

meemoo pid: 9z90961g1c

Diepdrukpers

Vous venez de voir une gouttelette composée d’ARN et quelques molécules. Tel de l’eau dans l’huile, l’ARN peut s’organiser pour créer une gouttelette sans membrane.

Plongez dans le projet [RNADAPT](https://science-societe.univ-cotedazur.fr/themes/du-gene-a-la-proteine/rnadapt) pour en savoir plus et découvrez le portrait de [Christian Braendle](https://science-societe.univ-cotedazur.fr/portraits/braendle-christian) à l'origine du projet !

[Découvrez l'ensemble de la balade scientifique Street Science d'Université Côte d'Azur !](https://science-societe.univ-cotedazur.fr/street-science)

T2 machinerie - BRAENDLE Christian - RNADAPT

**“Obsidian Spectre Rifle”** is the common name for *Tenebrae resonatus*, a covert‑operations instrument developed during the era of silent‑energy research. Its matte black frame wasn’t just aesthetic, it was engineered from a carbon‑shadow composite that absorbed stray photons, allowing the rifle to remain nearly invisible to early optical scanners. The internal pulse chamber produced a low‑frequency resonance that could be tuned for precision disruption rather than destructive force.

Its unexpected purpose emerged in subterranean exploration. Scientists discovered that its resonance pulses could map cavern structures by reading micro‑echo patterns in the rock. What began as a stealth‑field prototype became an indispensable geological tool, remembered today as a bridge between espionage engineering and deep‑earth science.

Obsidian Spectre Rifle - weapon

2026.03.14
a bone i found in brusand norway
posted a photo on reddit and got this answer
This is a haemal arch or chevron, they hang below the caudal vertebrae in a lot of vertebrates. Size and shape looks consistent with a dolphin or porpoise

location
https://earth.google.com/web/@58.53604498,5.72241494,0.61429524a,732.16919217d,35y,356.81173058h,0t,0r/data=CgRCAggBOgMKATBCAggASg0I____________ARAA

a dolphin or porpoise bone . Brusand,Norway

Ceramic figure known as "The Musician", representing a man sitting with his legs crossed and holding a rattle with his left hand. The character wears paint on his face (red and yellow), ornaments on his arms, and a three-strand necklace (with clay balls applied). His ears are pierced with expanders with decorated edges. He wears a helmet or cap and a loincloth tied at the back. His back shows visible vertebrae or body decoration with piercing, inlay and scarring.
 IDAEH Cultural Property No. 1.2.179.0064
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 306

Musician with a Rattle

Q11107 - Liam and Catherine Fitzpatrick 22 Brae Rd Barnmeen

Liam Fitzpatrick - 22 Brae Rd Barnmeen

Dolphin Vertebrae

Zoomorphic whistle  in the shape of two dogs in copulation. The male mounting the female is stripped of flesh, with the ribs and vertebrae clearly visible. The dog with exposed flesh wears a corded collar.

 IDAEH Cultural Property No. 16.2.5.0885
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Dogs in Copulation

Whale Vertebrae from the Yorktown Formation in York County, Virginia.

Whale Vertebrae - Yorktown Formation

Set of 2 worked vertebrae, in a biconical shape with vertical decorative fluting.
 IDAEH Cultural Property No. 1.2.144.0765
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 252

Bone

The atlas (C1) and axis (C2) are the first two vertebrae of the cervical spine, uniquely specialized to support the skull and enable a wide range of head movements. The atlas is a ring-shaped vertebra that lacks a vertebral body and spinous process. It articulates superiorly with the occipital condyles of the skull, forming the atlanto-occipital joint, which allows nodding movements.

The axis, located directly below the atlas, is distinguished by the odontoid process (dens), a tooth-like projection that extends upward into the anterior arch of the atlas. This structure enables rotational movement of the head at the atlanto-axial joint.

Together, the atlas and axis provide both stability and mobility to the craniovertebral junction, protecting the spinal cord while allowing precise and controlled head movements. Key anatomical features visible in this model include the anterior and posterior arches of the atlas, lateral masses, transverse foramina, and the dens and spinous process of the axis.

Atlas (C1) and Axis (C2) – Cervical Vertebrae

The joints between the bodies of the vertebrae, known as intervertebral discs (symphysis joints). are classified functionally as amphiarthrosis.

Spinal column

Brae Bar Cabinet

Liam and Catherine Fitzpatrick  Brae Rd Barnmeen

This model was generated using Meshy(https://www.meshy.ai)'s AI toolkit. It provides tools that effortlessly turn human imagination into stunning 3D models.

If you're interested in this model, visit the model page on Meshy to explore more about it: [https://www.meshy.ai/3d-models/Glass-Vertebrae-on-a-Stem-v2-019e0232-a280-7f7a-8d46-92b0fbdd5e77?utm_source=sketchfab](https://www.meshy.ai/3d-models/Glass-Vertebrae-on-a-Stem-v2-019e0232-a280-7f7a-8d46-92b0fbdd5e77?utm_source=sketchfab)

Glass Vertebrae on a Stem

also called the spinal column, is composed of a series of bones called vertebrae stacked one upon another. 
- Cervical spine: 7 vertebrae (C1–C7) 
- Thoracic spine: 12 vertebrae (T1–T12) 
- Lumbar spine: 5 vertebrae (L1–L5) 
- Sacrum: 5 (fused) vertebrae (S1–S5) 
- Coccyx: 4 (3–5) (fused) vertebrae (Tailbone) 
Plz contact me if you want to buy this 3dmodel.

Asset Library

About These Assets