The Gislinge boat was a 12th Century CE working boat found near the village of Gislinge, Denmark, in 1993. Dendrochronological dating puts its date of construction at around 1130 CE. It was probably used for fishing and goods transportation, and by the signs of wear and tear must have been 50 years old by the time it sank. This reconstruction is based off the Gislinge Boat Open Source Project by the Roskilde Viking Ship Museum (@vikingshipmuseum) , which can be accessed here: https://www.vikingeskibsmuseet.dk/en/professions/boatyard/building-projects/gislingeboat-2016

The project included the construction of various different experimental replicas based on the original find, and the publishing of all the plans so that other people around the world could build their own replica! In that spirit, I'm offering this model for free :) Enjoy, and check out the Viking Ship Museum's project website!

Length: 7.7m
Width: 1.5m
Draught: 0.25m

Gislinge Viking Boat

FREE MODEL FOR FREE FIRE 3D STORY MAKERS 
please use my model with my permision my email  aadityakumarshakuntala21b274@sjcnorthpoint.com and jimskill3072@gmail.com #freefire #3dmodel

FREE FIRE CHRONO 3D MODEL

Frog from Chrono Trigger with a little twist. :) There is a tpose rig attached with high quality textures for a free download! The rig isn't the best but should get ya started! Hope you all enjoy! 

Here is some renders from UE5 for case reference https://www.artstation.com/artwork/048mY5

Sir Frog - Chrono Trigger

Raw scan made on cinema movie projector that is standing in Kijów Centrum Cimena in Kraków, Poland
It was used for 35mm tape. Produced in the 1961 by Łódzkie Zakłady Kinotechniczne in Poland. The projector was designed for cinemas with rooms up to 1000 seats. It was then one of the most popular models used in Polish cinemas

The projector was equipped with an aspherical mirror with a diameter of 356 mm and a focal length of 120 mm. The standard lens provided by the manufacturer was Polkinar 1.8 / 100

The basic equipment of the projector was an optical sound reading system with two exposure bulbs - one in the working position, the other one in reserve (both fixed in the rotating holder, which allowed for exchange without interrupting the projection). In addition, the projector could be equipped with a 4-channel magnetic sound pickup

The projector was powered by a three-phase asynchronous motor. The engine was started using an automatic starter.
https://youtu.be/-xr1BMyKNWI
MusicInfo: Piano by AShamaluevMusic

Cinema Movie Projector AP5 - 1961

Indian Geosynchronous Satelite Launch Vehicle (GSLV) Mk3 made in Blender  v2.79 with UV unwrapped and painted in Substance Painter 2.

Texture resolutions are 1024x1024 including metal, roughness, heights, normals.

GSLV Mk3

***Paranthropus boisei***

Location: Olduvai Gorge, Tanzania.

Age: 1.8 million years ago.

Material: epoxy resin cast.

Dimensions: length, 215 mm; width, 157 mm; height, 117 mm.

Notes: RLA catalog no. 2501.1rp74 (cast).  Fossil discovered in 1959 by Mary Leakey and described by P. Tobias.  Represented the first reliable chronometric assessment of an early hominid.  Nearly complete cranium, called "Zinj."  Cast made by the Wenner-Gren Foundation Casting Program at the University Museum of the University of Pennsylvania.  From the teaching collection of the Research Laboratories of Archaeology, University of North Carolina at Chapel Hill.  Model by Madelaine Azar.

Paranthropus boisei (2501.1rp74-1) - cranium

This wreck was found in 1994 during construction work in the Uelvesbüller Koog, Nordfriesland, Schleswig Holstein, North Germany. It is a flat-bottomed Dutch cargo vessel, which could also sail in shallow waters. The dendrochronological examination of the oak wood used in the construction revealed that the keel was laid around 1600. About twenty years later there was an accident off the Adolfskoog: The vessel sank in a tidal channel. After salvage and a two-year stabilisation phase in a sugar solution, the wreck has been on display in the Nordfriesland Maritime Museum since April 1998. 

https://www.schiffahrtsmuseum-nf.de/index.php?id=uelvesbueller_wrack. 
The model has been created during a short visit to the museum in August 2022.

Uelvesbüll wreck Husum, Germany

Rezé, terrain Peigné (domus),
terre cuite moulée,
vers 100 après J.-C.,
SRA 2740.

Cette figurine évoque par sa coiffure l’impératrice Sabine. Elle s’inscrit dans la tradition de diffusion des images de l’empereur et sa famille divinisée, puissant outil de romanisation des Provinces. Fabriquées en série par moulage dans l’Allier et exportées par trafic fluvial, ces figurines en terre cuite blanche diffusaient, tout comme les monnaies, les coiffures à la mode à Rome.

© Awen Couëllan, [ Le Chronographe](http://www.lechronographe.nantesmetropole.fr), 2017

Buste féminin au diadème

This figure of a dancing warrior is remarkably similar to its counterpart on Rock 24, and also two figures on another rock at Zurla, on the steep slope running down from the southern end of the Naquane rock Art Park towards Capo Di Ponte.

As is the case for all of these figures, this one holds a sword in his right hand and a small shield in his left.  He wears a decorated helmet or headdress, and exhibits an amimated, dance-like posture.  He dates from the Iron Age 'Naturalistic' period (500-300 BC), designated IV 3 in the Valcamonica chronology.

Valcamonica, Foppe di Nadro - Rock 28 (1)

To me, a really great thing about Valcamonica rock art is that there is a chronology - it is dateable.  The styles of the figures can be fitted in to defined periods.  An immense amount of research over many years has gone into achieving this. Importantly, a huge volume of detailed, patient analyses of superimpositions has confidently revealed the relative chronologies of the different typology groups of the human figures & their associated weaponry can give reasonably certain absolute dates by comparison with firmly dated examples from excavation sites. 

Here I noted three distinctive figures of differing types, close to each other on Rock 24.  On the annotations I have given my own assessment of their typologies & given a date for each figure - which I accept, may be incorrect.  It is great fun & very rewarding trying to do this and building knowledge & experience in the process (well, if like me you like that sort of thing!).

Valcamonica, Foppe di Nadro - Rock 24 (2)

This model was obtained by applying advanced photogrammetry technologies and cutting edge techniques currently not applied to this field that have allowed me to recreate previously unattainable models like Harbin, Yunxian 2 and now HLD-6. This model represents a reconstruction of the HLD-6 cranium from the Hualongdong paleoanthropological site in Dongzhi County, Anhui Province, China.

The HLD-6 individual lived during the late Middle Pleistocene, approximately 300,000 years ago. Stratigraphic and geochronological studies place the Hualongdong hominin assemblage between roughly 331–275 thousand years ago.

This digital reconstruction was created using published anatomical descriptions and visual references from the study “Craniofacial reconstruction and morphological analysis of the HLD-6 skull” (Acta Anthropologica Sinica, 2025) and scaled using cranial measurements from the supplementary dataset of “The phylogenetic position of the Yunxian cranium elucidates the origin of Homo longi and the Denisovans.”

Hualongdong 6 (HLD-6)

Several different periods of armed figure here.  The central, larger, square-bodied warrior wielding a sword & shield would appear to be the most recent (Late Iron Age).  He clearly overlies the orant-like armed figure above, and at right angle, to him, which is much earlier - Late Bronze Age period III D. aound 1200-800 BC.

There are two separate deer hunting scenes to either side of this model, again oriented at right angles to each other.  The figures are different from those mentioned above, and I would place them as being of an intermediate date between those two - the Schematic period of the Early Iron Age, period IV 1 (900-600BC).

(Note that the above dating is my own interpretation, and whilst it might not be spot on, I am confident of the relative chronology of the three types of figures represented here.)

Valcamonica, Bedolina - Rock 5 (3)

This small rock was engraved during the second half of the first millennium BC.  The Chronology can be determined through the typology of the weapons clasped by the duelists.  The central section of the rock is decorated with several pairs of battling warriors.  They brandish axes with expanded blades, also represented separately near the warriors, and in some cases they hold decorated shields.

At the far right there are two quatrefoil rosa camuni symbols, adopted as the present day emblem of the Lombardy region.

Valcamonica, Paspardo (Dos Sotolaiolo) - Rock 1

High-quality 3D model of a Movado Calendoplan wristwatch created for product visualization and rendering.

This model focuses on accurate proportions, clean topology, and realistic materials to achieve a premium watch presentation. The gold case and bracelet feature polished metallic reflections, while the deep blue dial contrasts with detailed chronograph subdials and markers.

The bracelet links were carefully modeled to maintain a realistic structure and mechanical feel, making the asset suitable for close-up product renders.

Features
• Detailed watch case and crown controls
• Fully modeled metal bracelet links
• Chronograph sub-dials and date display
• Physically based materials for realistic reflections
• Optimized clean topology for rendering

Workflow
Modeled and rendered using a physically based workflow suitable for product visualization and real-time presentation.

This asset was created as part of my 3D product visualization practice, focusing on high-quality materials, lighting, and presentation.

Movado Gold Watch – Photorealistic 3D Model

This model presents part of the keel and floor timber assembly of the 17th-century Dutch fluyt (fluitschip) Double Dutch (NCN 34303), recorded during photogrammetric survey in 2025. As a principal structural element of the ship’s bottom construction, this assembly provides significant information on building sequence, framing arrangement, and hull architecture. The wreck (31m x 6m) , located near Kornwerderzand in the Dutch Wadden Sea, has been provisionally dated to c. 1680 on the basis of dendrochronological evidence and associated material culture. In conjunction with the vessel’s recorded dimensions and other constructional features, this element reinforces the identification of the wreck as a two-deck Dutch fluyt.

Videoclip expedition 2023: https://youtu.be/WpbaO-ycnd8?si=_TVxGe5WP87Ea87s
©Stichting Archeos Fryslân

Double Dutch Fluyt: keel-floor assembly

This 3D model documents the preserved stem assembly of the 17th-century Dutch fluyt (fluitschip) Double Dutch (NCN 34303), discovered in 2022 in the intertidal zone of the Wadden Sea near Kornwerderzand by Stichting Archeos Fryslân. The wreck (31m x 6m) was investigated through a series of diving expeditions between 2023 and 2025. Based on constructional characteristics, associated artefacts, and dendrochronological analysis of sampled timbers, the vessel has been dated to around 1680. The stem assembly constitutes an important diagnostic component for the reconstruction of the bow structure and supports the interpretation of the wreck as a Dutch fluyt of approximately 120 Amsterdam feet in length. 

Videoclip expedition 2023: https://youtu.be/WpbaO-ycnd8?si=_TVxGe5WP87Ea87s
©Stichting Archeos Fryslân

Double Dutch Fluyt: stem assembly

For production-ready use, we recommend downloading the source format.The converted file is intended only for use in the web viewer. In the original file, the following are fully preserved:✔ original scene hierarchy✔ all materials without simplification✔ proper texture maps✔ proper object namingIf you are going to integrate the model into a project, select the Original format.Hi guys If you are looking for the best quality models for your renderings don t look any further! Here you can find Audemars Piguet Royal Oak selfwinding Chronograph Gold with all materials set up for Cycles. It makes it a fast and easy one click solution for scenes in all your most exciting projects. Don t waste time creating on your own and bring realism into your scenes. Save your time and bring realism into your scenes

Royal Oak Selfwinding Chronograph Gold

Timex TW4B04400 Expedition Scout Chronograph

Timex Expedition Watch

This is the Time Ball Mechanism which is inside the The Time Ball Tower.

The [Time Ball Tower](https://skfb.ly/prsrK), was constructed in 1894 as part of the growing harbor infrastructure. It was initially a one-story structure used for time signaling, with the ball being dropped at 1 PM to aid ships in setting their marine chronometers. In 1903, the tower was raised to improve visibility and the mechanism was electrified. The tower became obsolete in 1934 with the introduction of radio time signals. Although no longer in use, it was declared a National Monument in 1982 and restored in 1997, with a reconstructed time ball mechanism that now operates electronically.

The Mechanism was scanned in July 2024 with a Artec Leo scanner.

GDH extends gratitude to the V&A Waterfront for granting permission to document this historic structure and its contents.

Asset Library

About These Assets