Cicada - Retro Cartoon Car.

Check out my other cartoon car models at www.retrocartooncars.com.

Cicada - Retro Cartoon Car

Educational project

Main study areas:

* 3d modelling of middle-complexity hardsurface object (bycicle), 
* texturing process (substance painter) and texture baking, 
* particles distribution (blender), 
* creating trees of a custom shape with prcedural workflow (built-in sappling addon) and creating planar foliage for tree (branches with leafs) 
* and overall environment setup for a small scene.

Main assets:

* Bycicle (4k x 4)- may be used as a background asset (a bit clunky geometry. Was reusing geometry from my old beginner's project)
* Bench, lantern, bin, package, tree (varies 4k-2k) - quality varies, can be used as a backround assets.
* Street elements, such as road, pavement and etc are hardly reusable..

Feedback is welcome :P

Sidewalk

When the Nature and Civilization collide - they can fight... but they can also cooporate. This old watermill, bakery, the peculiar bridge, old chestnut, the farmer, the baker... they all are living proof that nature and civilization can coexist in harmony. This is my entry for the Nature & Cicilization challenge.

This Blender scene took me 12 days to design and model. Everything is hand-painted

These are my drawings:
![Design drawings](https://i.imgur.com/dW1DhqI.jpg)

Support my work: **https://ko-fi.com/conradjustin**

My website:**[ https://conradjustin.art/](https://conradjustin.art/)**

my Artstation:**https://www.artstation.com/conradjustin**

Good luck to all participants!

Baker and the Bridge

Someone in my family owns this beauuuutiful house in Provence. My family and I were lucky enough to stay there this summer. The sound of cicadas was constant during the day, and 2 donkeys (!) kept us company, walking around the property. The house is surrounded by fields of lavender, and old villages. Does this sound dreamy? It was.

Scanned in a few minutes, with an ASUS ZenFone AR phone featuring the full Google Tango hardware / software stack (depth sensor, etc.) and Google's own Constructor 3D scanning app.

Provence House 3D Scan ZenFone AR

The green tiger beetle, scanned with #disc3d

Cicindela campestris

Modelo usado en una compocición que hice hace tiempo que podrán ver aqui
http://fav.me/d6ldouy
Model By:
http://digitrevx.deviantart.com/

Ani-Chan

Signaling Devices Manufacturing Plant in Katowice – manufacturer

1970s, Katowice

Mościce Art Centre

The presented device is one of the few surviving emergency telephones on the factory premises, which used to be on the equipment of every industrial facility. The massive telephone, weighing over 20 kg, was manufactured after World War II as a miner's telephone at the Zakłady Wytwórcze Urządzeń Sygnalizacyjnych (ZWUS) in Katowice-Wełnowiec. Originally, this type of telephone was intended for communication in methane mines and in rooms with a high risk of explosion. Its cast-iron construction, which is resistant to mechanical damage.

For more images and further information, visit: https://muzea.malopolska.pl/en/objects-list/3379

Inventory number: CSM/F/I/GA/024

Regional Digitalisation Lab, MIK, Mościce always in my heart. Dissemination of the cultural heritage of the industrial district of Tarnów projekt

Project Visualization (3D model + textures): Sebastian Woźniak

Factory emergency telephone

La TT 200 DS es una motocicleta multipropósito de un diseño bastante atractivo inspirado en las motocicletas de rally. equipado con hand savers y defensas laterales y frenos de disco en las dos ruedas.

![](https://www.alkosto.com/medias/7705946723527-001-750Wx750H?context=bWFzdGVyfGltYWdlc3wxMDI1OTB8aW1hZ2UvanBlZ3xpbWFnZXMvaGNmL2g2ZC85OTkxNzI3NTc5MTY2LmpwZ3xhYzdiNmJmZGRmM2I0YmNiODIyYjE3MDgxOTlmZTlhOTJlM2JmZmZhZmZjZTIzYjhiMmZjNmM2YTcwM2QxZjRk)

Akt Tt Ds 200 repainted

Selimiye Cami, Edirne'de bulunan, Osmanlı padişahı II. Selim'in Mimar Sinan'a yaptırdığı camidir. Sinan'ın 90 (bazı kitaplarda 80 olarak geçer) yaşında yaptığı ve "ustalık eserim" dediği Selimiye Camii gerek Mimar Sinan'ın gerek Osmanlı mimarisinin en önemli yapıtlarından biridir.
2000'de UNESCO tarafından Dünya Mirası Geçici Listesi'ne dahil edilen Selimiye Camii ve Külliyesi, 2011'de ise Dünya Mirası olarak tescil edildi.
Model Cengiz Erdoğan tarafından hazırlanmıştır.

Edirne Selimiye Camisi Fotogrametrik 3d Modeli

fue la primera en incorpora el primer motor DTSi de 4 válvulas. Liviana pero potente y con una eficiencia de combustible comparable con las motocicletas de 125 cc.

pulsar 135 ls

Infantry casemate bunker concrete fortress pillbox "V.b/87/C"  řopík  near Chomutov, Czechia part of the Kočičák museum
http://www.kocicak.cz

Map: https://mapy.cz/zakladni?x=13.3866443&y=50.4897893&z=17&source=base&id=2247443

https://en.wikipedia.org/wiki/Czechoslovak_border_fortifications

Former part of Czechoslovak border fortification built in 1930's, now under heritage protection.
http://www.fortif.net/files/overview.php

Photogrammetry scan (350x24MP DSLR + drone by https://sketchfab.com/kubacpetr )

**Available to download for free, easy to 3D print as well.**

Bunker V b/87/C

Animated, 6 Material, 37K Vertices
This is my attempt to made a rigged book inspired by lovecraftien illustration and well made manufactured books that you all can find on Amazon.
i try to gather all the symbols i known in one piece with the same artstyle. I try to put the maximum of detail in this grimoire to exercice with the multires sculpting modifier in Blender

All the source of Illustration Reference below as always. 
Don't hesitate to check their work.

Daniel Govar for the Illustration : https://www.deviantart.com/danielgovar/gallery.

I also planning to made a Baked one but i would loose a lot of definition.
Bendy Bones export arn't working properly in sketchfab sadly. And Baking animations don't work either too (sorry)
btw i deleted my discord if you want to contact me (for the correct rig of the book for exemple) you can.
at Sirolalo@tutanota.com

Grimoire - Morphose

License: **CC0**  
  
Animalia 動物界  
　Arthropoda 節足動物門  
　　Insecta 昆虫綱  
　　　Hemiptera カメムシ目  
　　　　Cicadidae セミ科  
　　　　　Graptopsaltria アブラゼミ属  
　　　　　　Graptopsaltria nigrofuscata アブラゼミ  
  
セミ せみ 蝉

CC0 DAPCON 2023年デジタルアーカイブ産業賞受賞記念 アブラゼミ

12th-11th Century BCE Gui (food vessel) in the collection of the Minneapolis Institute of Art.

From the object's description on artsmia.org:
"Stylized animal motifs predominate Shang bronze decor. The dragon, snake, cicada, ram, owl, tiger and even elephant can all be found. These creatures were almost always subordinate to the taotie mask which typically dominates the largest or most important register of nearly all Shang bronzes. This exquisite food bowl has three such masks clearly cast in high relief encircling its cauldron. Below each mask, in the foot band, are two confronting dragons shown in profile, while four similar dragons appear above each mask in the top decorative band..."

More information:
http://collections.artsmia.org/art/833/food-vessel-yu-china

Made with a few hundred 20MP photos, built in PhotoScan.

Contact permissions@artsmia.org for a higher-res file.

Here's the STL of the object on Thingiverse:

http://www.thingiverse.com/thing:1561311

Gui (Chinese food vessel)

The sheepskin coat was purchased for the collection of the Tatra Museum from Andrzej Kubin of Ratułów in 1929. The owner of the apparel was a sixty-year-old inhabitant of the village of Ciche, who had worn it on her wedding day. The sheepskin coat, tailored in a fashion typical for women, reaches to the knees and is slightly narrowed at the waist and widened at the bottom. It was fashioned from five pieces of leather: two front pieces, back piece and two sleeves. It is fastened with three wooden buttons covered with white leather, which are slid through loops. The stand-up collar is decorated with red leather binding.

ID no.: E/4027/MT

Time of creation: before 1880

Museum: The Dr. Tytus Chałubiński Tatra Museum in Zakopane

https://muzea.malopolska.pl/en/objects-list/1792

Digitalisation: Digitalisation: RDW MIC, Virtual Małopolska project

Sheepskin coat

Hi everyone ! I had freetime to do quick 3D models and I thought Nekomori's fits the best for that kind of exercices ! So here's the first of the two models I did in an afternoon !
Enjoy and go check her art if you haven't yet !

https://twitter.com/nekomori_art

Nekomori Toast Bear

Yet another zelda fanart! I guess ocarina of time is such an Iconic game I couldn't resist doing ganon! It was first sculted on Zbrush and then shoved into blender for retopo, the textures were made on substance painter, I guess this is the reason why my room was so hot this summer haha! 

I didn't really like ganon's design in smash bros ultimate and i always wonder how this fearfull creature would look like in hd, that's why i tried to recreate the dark lighting of the orignal OOT, i think it makes him look so much more terrifying! They did such a wonderfull job with the lighing, composition and silhouette that I can only try to imitate such great scene! 

It was also mainly modeled with the original ganon artwork for ocarina of time, as there was no other artwork in this style, it made the whole thing much harder but it was a fun creative exercice, having reference is good and using them is appreciated but i just love wondering how something would look like in 3d, and is to me a usefull skill.

Zelda Ocarina of time Fan Art: Ganon

this is an asset that is part of my next project. I am creating a scene as whcich the theme is historical japan. it will be alongside all my other japanese style assets to create hopefully a kind of anciant japan style scenery. you can find all the other assets here @ https://sketchfab.com/LeviWalker1999/collections/japanese-assets all free to download to use for yourself.

Japanese shrine - Bridge

**Public address system  –  tube amplifier**

1954, Mościce Art Centre, Poland

The need to provide information and current announcements related to the operation of the State Factory of Nitrogen Compounds in Mościce has appeared since the very beginning of the company. Therefore, after World War II, in 1948, a makeshift amateur radio studio was opened in the facility next to the main reception building. It operated until April 25, 1950, when the official Company Radio Studio was opened.

**For more images and further information, visit:** 
https://muzea.malopolska.pl/en/objects-list/3388

Inventory number: CSM/F/I/GA/041

Zakłady Azotowe w Tarnowie-Mościcach

**Regional Digitalisation Lab, MIK, Mościce always in my heart. Dissemination of the cultural heritage of the industrial district of Tarnów projekt**

Project Visualization (3D model + textures): Wojciech Szczekan

Public address system  –  tube amplifier

The *Hexaplex cichoreum*, commonly known as the "endive murex", is a medium sized species of sea snail in the family Muricidae (the murex shells or rock snails). These sea snails can only be found in the West Pacific, more specifically the regions of Indonesia, Papua New Guinea, and the Philippines. Endive murex shells are generally a white color banded with a darker brown, however, there is also an all-white variety (var. albicans) that can be found in the Philippines.

More info here: https://en.wikipedia.org/wiki/Hexaplex_cichoreum

Accession #: 178.17

Captured with an Artec Spider 3D Scanner
https://www.artec3d.com/portable-3d-scanners/artec-spider-v2

Endive Murex Shell

Repositorio de modelos 3D de Ddiaz Design

![](https://autosdeprimera.com/wp-content/uploads/2023/11/byd-tang-2024-facelift-colombia-a.jpg)

El BYD TANG es el revolucionario SUV eléctrico de 7 plazas con tracción total, que combina estilo, rendimiento y sostenibilidad.

Equipado con la pionera batería de 108,8 kWh de BYD, este SUV eléctrico de gran tamaño ofrece una excepcional autonomía de 530 km (WLTP en ciclo combinado) y una increíble aceleración de 0 a 100 km/h en solo 4,9 segundos. El BYD TANG exuda rendimiento por los cuatro costados.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a BYD 3d model

Credits: https://downloadfree3d.com/

2024 BYD Tang

more like frostbite, now it's a huge icicle as an arm

2017 john doe

Cicada Skirt - CC Stefanik

Finzean Bucket Mill Community Interest Company has been founded to repair, maintain and operate the historic Grade-A Listed water powered sawmill, which specialises in the production of wooden buckets, which can be found near the village of Finzean in Aberdeenshire, Scotland. 

The Bucket Mill has a rich history. Built in 1853 on a site of a previous water powered sawmill, it was operated by the Brown family for three generations. It was built to produce turned wooden buckets, of a style which is now completely unique to the mill. By the late 1970s the mill was derelict, but was saved by Stan Moyes, who with the help of friends, led the restoration efforts in the 1980s and operated the mill throughout the 1990s and 2000s, cementing the mill as a local landmark.

The Finzean Bucket Mill CIC is the next custodian of the mill, which is owned by the Birse Community Trust.

Asset Library

About These Assets