The Punishment- A digital study of Farnese Hercules sculpture 
This work of mine is a digital study I made on Farnese Hercules sculpture. Ancient Roman sculptures carry lot of stories and mysteries with them.This is called Farnese Hercules as it was excavated by the Farnese family. Wildly powerful figure with incredible musculature ,but also the figure is exhausted with tiredness on his face. The statue is Hellenistic with taller proportions and a smaller head. The original sculpture was made by Lysippos and later reproduced by Glykon. 
#classicsculpture #digital #sculpture #3D #3dprinting #vfx #MrX #zbrush #keyshot #anatomy #character #power #hercules

The Punishment- A study of Farnese Hercules

My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

My personal character FanArt practice & 3Dprint experiment. 

![some gif](http://i.giphy.com/3oz8xzqr3KtMNdKLDi.gif)

- Series [ Love Live! Sunshine!!](http://love-live.wikia.com/wiki/Love_Live!_Sunshine!!)

- Character [Watanabe_You](http://love-live.wikia.com/wiki/Watanabe_You) 

- Costume [Aozora_Jumping_Heart](http://love-live.wikia.com/wiki/Aozora_Jumping_Heart)

[Hi-res 3Dprint files posted on my Thingiverse](http://www.thingiverse.com/thing:1953480) 

- Design to print in 1:6 scale with 0.4mm nozzle. 

- Max clothes thickness are 1.2mm. 

- Use screw and pin to assemble. You can 3Dprint as size ref and buy some at hardware store. 

- [More poses](https://skfb.ly/YxXY)

- Other costumes [01](https://skfb.ly/X8vJ) , [02](https://skfb.ly/VsCU)

- [WIP archives Here](https://www.facebook.com/Johnnie3Dtalk/photos/?tab=album&album_id=1123363244443452) 

- [twitter post](https://twitter.com/wiriyapol/status/806428103215976448)

Yousoro! 青空 Jumping Heart [3Dprint]

Grammy Award, first released in 1958, awarding outstanding achievement in the music industry.
Click to print at 3DHubs: http://3dhubs.com/3dprint/add/product/grammy_award

Grammy Award

Long before the world ever heard of that guy with the silver glove the Ohlson family made their home at their version of Wonderland Ranch in the remote desert which is now Joshua Tree National Park.

The scan consists of 123 photos all taken from ground level.

This is a photoscan I shot of it November 2014.  It was an interesting scan because my 3 kids seemed  intent on "photobombing" half the shots I took, but since they were moving around so much, no sign of them appears in the final scan.  I good lesson.

A 3d printable version can be found at 
http://www.thingiverse.com/thing:571191


You can hear more about this scan on

 [**3d printing today podcast**](http://threedprintingtoday.com/ "3d Printing Today Podcast")

Wonderland Ranch Joshua Tree NP

YES MADE WITH AI!

this is the Badge of Flora from Winx Club Charmix, FREE to use for 3d pinting or else :)

Winx Club- Flora Charmix Badge 3dPrint

As a proud Khadoran citizen, I could simply not standby as the incompetent engineers assigned to rebuild the glorious pride of the motherland, BEHEMOTH, struggle to recreate the engineering feat that allowed the monstrous warjack to stride on two legs. Instead, they decided to strap him onto the treads of the AC-10 Bison and call it a day. UNACCEPTABLE. For the Empire I took it upon myself to learn the craft of forging a warjack and after much trial and tribulation my efforts came to fruition. The Behemoth now shakes the earth with each step as he crushes foe with, gun, fist and foot…  ____________________________________________________________________________________________________ I couldn’t stand (and neither could Behemoth 2.0) that the warjack that got me into Khador all those years ago was not living up to his potential in the new version. So between sketchup and teaching myself blender, along with lots of trial and error I am satisfied to share Behemoth’s legs with the world! Big shoutout to Fableforgedprints for printing all the versions and troubleshooting/correcting all my 3d printing mistakes! Be sure to tag me or post if you end up using the legs for your 80mm Behemoth 2.0.

Khador - Behemoth 2 - Legs

Patreon : https://www.patreon.com/cw/Vividprintwork     Commercial $10/month  For sellers and commercial use     Require Glue  Loose fit     Setting:  Top and Bottom Piece Set Layer Height to .12 for better layer line OPTIONAL    Seam: Set Top and Back Model to Back Seam  Wall: 2  Infill:10  pattern: Gryroid  Enable Tree Support  I like adding Outer Brim OPTIONAL     Speed Setting OPTIONAL Set to 60mm/s

PokeBall

Generated with ai and myself made some tweaks. file might be big so you need to scale it down. i couldn't find any crowns of Flora for 3d printer so i decide to make my own for anyone who wants it. compleetly free

Winx club- Enchantix Cosplay Crown 3dPrint

I made this photoscan of my house two years ago using VGA resolution video frame grabs from the built in camera on a $50 quad copter.  This was an experiment in "how bad could it be".  The results, while not stunning, aren't actually complete rubbish.  The images all aligned just fine and the scan, although not terribly presentable, actually has a rough resemblance to the subject.  If I knew better how to pilot the quad copter that would help a lot.  Assuming a competent pilot could make a capture equal to the quality of the best areas of this scan, it might actually be a useful tool for some low quality or high risk work.

We talked about this scan on the [3d printing today podcast](http://threedprintingtoday.com/ "3d Printing Today Podcast")

Photoscan shot with $50 quadcopter

I scanned this anvil using 74 shots taken with my Samsung Galaxy S5 phone.  I processed them in Agisoft Photoscan.

You can see all the detail of the rust, or as blacksmiths say "the lovely patina"


You can hear more about this scan and all kinds of stuff like this on:

 [**3d printing today podcast**](http://threedprintingtoday.com/ "3d Printing Today Podcast")

Anvil scanned with Galaxy S5

An approximate model for only the exterior of the temple . Done with **sketchup 2024** and was used and 3D printed for a local 3Dprinter_related ad that was never released unfortunately

"Kind of low poly" parthenon model

A collection of lowpoly scanned fruits and vegetables, ready to use in game engines, as particles or for optimized renders. Comes with [a demo](https://skfb.ly/6z6Lt)!

Each model is made of ~1000 triangles, and 1024px albedo and normal maps (jpg).

Original scans from @fredfroehlich @seijik42 @linkfredriksson @yonemoto.taiga @xfanta @BSlegt @tux @parallelo.d @daniel132 @chytamrealitu @all_scan_everything @NestorMarques @nick_wiggins @arqus3d @aquateknica @nate_sid @marcovolino @nedo @nebulousflynn @james @calidos @mantasT @cimtech @semblance @3dhdscan @abbyec @gavez @simonspata @jledergerber @Duplicate3d @mauricesvay @curiofawkstrawt @myscan @Madman05 @sheepfilms @xiezhong @epipolar @ken.varner @gregoryarbit @Reductio @jtuhtan @czheiko @scansource3d @animator12 @vibrantnebula @rigsters @tscheer @etatech3d @nunommf @corralsanti @topfrank2013 @khoi3d @carlosfaustino @mik1190 @LittleNinja @moonsoon @gbrlmenchen @ronjart @fablabpr @afinia3dprint @s.eienberger @mark.energy @digitizedesigns @kraskod @aellis43

Asset Library

About These Assets