Low Poly Car - Chevrolet C10 Pickup 1963. 

C/K is a series of trucks that was manufactured by General Motors from the 1960 to 2002 model years. Marketed by both the Chevrolet and GMC divisions, the C/K series encompassed a wide range of vehicles. While most commonly associated with pickup trucks, the model line also included chassis-cab trucks and medium-duty trucks and served as the basis for GM full-size SUVs. Through its entire production, the model line competed directly against the Ford F-Series and the Dodge D series (later the Dodge Ram pickup).

Used for both the model branding and the internal model code, "C" denoted two-wheel drive; "K" denoted four-wheel drive. Four generations of the model line were produced, including the second-generation "Action Line" and third-generation "Rounded Line" vehicles. For the fourth generation, GMC revised its branding, changing to a singular GMC Sierra nameplate (C/K remained as an internal model code).

Low Poly Car - Chevrolet C10 Pickup 1963

This is the head of David by Michelangelo. This version is based on a full-sized bronze copy created from molds taken directly off the original. 

This model of David's head was created from 105 photos I shot yesterday evening. David just happens to be looking towards the setting sun. I had a difficult time with the shaded back of his head and I'm still unable to capture the top of his head. I've guessed that the top of David's head is over 30 feet above the platform where he stands today.

Visitors to Sioux Falls, SD can see this wonderful copy downtown at Fawick Park.

David by Michelangelo

The Cadillac Series 70 (models 70 and 75) is a full-size V8-powered series of cars that were produced by Cadillac from the 1930s to the 1980s. It replaced the 1935 355E as the company's mainstream car just as the much less expensive Series 60 was introduced. The Series 72 and 67 were similar to the Series 75 but the 72 and 67 were produced on a slightly shorter and longer wheelbase respectively. The Series 72 was only produced in 1940 and the Series 67 was only produced in 1941 and 1942. For much of the postwar era, it was the top-of-the-line Cadillac, and was Cadillac's factory-built limousine offering.

Production of the short wheelbase Series 70 ceased in 1938, but reappeared briefly as the relatively expensive Series 70 Eldorado Brougham 4-door hardtop from 1957 to 1958, while the long wheelbase Series 75 made a final appearance in the 1987 model year.

Dirty Car - Cadillac 75 Sedan 1953

The X7 is a full-size luxury suv built by the German car manufacturer BMW. This model came from a beamng mod. I added the animations for the doors.

Link to mod:
https://www.modland.net/beamng.drive-mods/cars/2024-bmw-x7-m60i.html

Car in real life:
![](https://vehicle-images.dealerinspire.com/4055-18003204/5UX33EM02S9W97891/aa3241967a71fe4d28c0e0479c7f8873.jpg)

BMW X7 M60i

# 1989 LINCOLN TOWN CAR
The 1989 Lincoln Town Car is a luxurious, full-sized American sedan known for its sharp edges, chrome trim, and smooth ride. And now, you can get this classic beauty **for free**!

# SUPPORT ME

**If you’d like to support me in developing my game, consider joining my Discord server.** One great way to help is by modeling a building. Just one model already makes a big difference!

**As a thank-you, you’ll get 40% of my tutorials for free.** Plus, if you’ve been a member of the Discord server for more than 3 days, you’ll get access to my beginner tutorial completely free.

**Want to use this 3D model for commercial purposes? Just reach out to my Discord server staff or support team.**

Thanks in advance for your help and support!

1989 Lincoln Town Car

Note: this was full-size stagecoach, not a toy!! The park was closing and security was rushing me out... I did as fast as I could (about 120+ pics). Pretty amazed about the quality for a rushed capture! ?

Scanned with Scenario and the iPhone. Capture 3D models, build 3D scenes and connect with other creators, all from your phone. Try it today (it's free): https://apple.co/3PZVG1e.

Please feel free to follow my collections of daily scans ([link](https://skfb.ly/6YuwK)) as well as my scans in San Francisco, Paris, or in the catacombs ([link](https://sketchfab.com/edemaistre/collections)). Follow me on [Twitter](https://twitter.com/emmanuel_2m).

Halloween stagecoach (iPhone 13 Pro scan)

Repositorio de modelos 3D de Ddiaz Design

![](https://motorweek.org/images/road_tests/2021_Infiniti_QX80_Icon.jpg)

For the 2021 model year, the Infiniti QX80 full-size SUV offered in the United States has been improved with added equipment, innovative new technologies and stylish features befitting its luxury status. Infiniti has announced the MSRP for the new 2021 QX80 full-size luxury SUV, which has been updated to push boundaries with distinct exterior and interior features. The 2WD QX80 will start at $69,050 and the All-Mode® 4WD will be $72,150.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a Infiniti 3d model

Credits: https://3dwarehouse.sketchup.com/user/u9da13335-caf8-472a-af19-c20647fd81cf/Gh%C3%B8st

2021 Infiniti QX80

The 2005 Ford Crown Victoria is a classic full-size sedan, renowned for its "body-on-frame" construction, exceptional durability, and status as the quintessential North American police cruiser and taxi. It was built on the legendary Panther platform, which prioritized reliability and a smooth, traditional ride quality.

![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f0/Ford_Crown_Victoria_LX.jpg/1280px-Ford_Crown_Victoria_LX.jpg)

[FREE] Ford Crown Victoria 2005

The SIG Sauer P220 is a legendary, full-size, semi-automatic handgun renowned for its military-grade reliability and exceptional accuracy. Primarily chambered in .45 ACP, it features a rugged all-metal construction, a single-stack magazine, and a classic decocker system. Explore various models and configurations on the [](http://www.sigsauer.com/firearms/pistols/p220.html)

SIG Sauer P220

Long and boaty fullsize luxury sedan based on the lincoln towncar from 1990. I really like this car, as it's based on a real one but with my own original touch. As always, g ready and as low poly and optimized as i can. Use it wherever but give me some credit.
As always, with love.

MaG :)

Full-size american sedan from the early 90s

G17 Gen 5
The G17 Gen 5 is a full-size, striker-fired 9mm pistol known for its reliability, durability, and accuracy. It features an improved trigger, flared magwell, nDLC finish, and interchangeable backstraps for a customizable grip. With no finger grooves and a refined slide design, it offers consistent performance for duty, competition, or home defense.

G43
The G43 is a slim, single-stack 9mm pistol designed for concealed carry. It’s lightweight, compact, and easy to hide while still delivering Glock’s legendary reliability. With a 6+1 capacity and simple, snag-free design, the G43 is a popular choice for everyday carry and backup use.

G17 Gen 5 G43

The FN P90 is a compact, futuristic-looking submachine gun—technically classified as a Personal Defense Weapon (PDW)—designed by the Belgian manufacturer FN Herstal in the late 1980s.
It was originally built for "rear-echelon" troops (like truck drivers or clerks) who needed something more powerful than a pistol but more compact than a full-sized rifle.

FN P90

The **2030 Polluxstar P500 Solarified Electric 2+2 Coupe** is a sports car with two full-sized front seats and two child-sized rear seats. It is powered by a dual-motor powertrain with all-wheel drive and a 4-speed dual-clutch transmission. Producing 500 horsepower and 384 pound-feet of torque in the P500 trim level, its acceleration timing from 0 to 60 miles per hour (or 97 kilometers per hour) ranges from 2.2 to 5.4 seconds, depending on which mode is selected. With a dry weight figure of 2,825 pounds (or 1,281 kilograms), the P500 is very lightweight for an electric car. It is projected to reach a top speed of up to 200 miles per hour (or 322 kilometers per hour).

It should be noted that I removed the body of a generic Automation Tycoon design here and replaced it with one of my very own 3D designs from back in 2024.

I will let you in with a little secret: *it was originally an AI-generated concept.* 

![https://i.imgur.com/FabX7gs.png](https://i.imgur.com/FabX7gs.png)

2030 Polluxstar P500 Solarified Coupe

A 3D model pack of traditional Japanese "Tatami" (畳) mats, designed to bring an atmospheric, dramatic vibe to your scenes with low-poly optimization and light/shadow contrast.  
  
This is a prototype version (v0.1) for material testing and is available for free download.

# Pack Includes (FBX Format)
*     Full-size Mat (Approx. 1m × 2m) / Half-size Mat (1m × 1m)
*     4.5-Mat & 6-Mat Room Layouts (Shugiki-shiki / Auspicious arrangement*)
*     Textures: Igusa (rush grass), Heri (border fabric), and Normal Maps (2048px)

Note: "Shugiki-shiki" is a traditional layout where mat corners do not meet in a cross.
  
# Technical Specs (Per single mat)
Polygons: 676 Triangles  
Vertices: 344  
Materials: 2 

# Compatibility
Works with Unity, Blender, Unreal Engine, and VRChat  
(world-building/props).

## Terms of Use
OK: Commercial use, modification, VRChat, and games.  
NO: Redistribution, re-selling, or claiming the work as your own.

Traditional Japanese Straw Mats (Room Layouts)

The Forgemaster's gift to the community. Free. The Forgemaster Dagger is a full-scale 3D printable cosplay prop, support-free, multicolor-ready, with built-in LED channels so it glows from within. This is a free model from our upcoming Kickstarter campaign The Eternal Forge: Fantasy vs Grimdark Collection — launching April 7th. If you like what you see, follow our campaign and don't miss the Early Bird rewards. ? https://www.kickstarter.com/projects/meniatures/the-eternal-forge-fantasy-vs-grimdark-collection Printed it and loving it? Show us! Share your make on social media and tag us, every post helps spread the word and brings more people to our Kickstarter campaign. Let's build this community together! ? ? Instagram / TikTok: @MEniatures https://www.instagram.com/me_niatures/  ⚠️ Important: This model is free for personal use only. If you'd like to sell prints, you'll need to grab a commercial license, available through our Kickstarter campaign. ? LED Parts List Here are the exact components we used to light up the dagger: LED strip: 3mm COB LED strip with built-in 5V battery pack  Switch: 10x15mm rocker switch (ON/OFF) Both are very affordable and easy to find. We also recommend using transparent filament for the core so the light shines through beautifully!    FEATURES: -Support-free-Multicolor-ready-LED integration-Easy assembly-Blade available in two sizes — full-size for large bed printers and a scaled version for smaller beds-Blade available in two versions — single piece, or split in two parts for easy multicolor printing-Hollow blade interior — ready for LED lighting-Handle available in two versions — solid, or with a pre-cut hole for an on/off switch for the LED lights  

[FREE] Forgemaster Dagger --LED Ready Cosplay Prop | Fantasy vs Grimdark Kickstarter Campaign

A miniature model of a throwing stick (or boomerang), crafted from a dense faience core covered in a rich blue-green glaze. The object features a distinct, aerodynamic curvature designed to mimic full-sized wooden hunting weapons. A clean break is present near its central midpoint, which has been structurally consolidated and mended in modern times. This model likely dates to the New Kingdom (c. 1550–1069 BC).

Model Throwing Stick (W1007)

This is a low-poly 3D model of the iconic 2001 Chevrolet Caprice sedan. What makes this
model unique is that it was generated using the advanced 3d.hunyuan AI technology, capturing the nostalgic essence of the early 2000s full-size sedan within a minimalist, low-polygon structure.Key Features:AI Generated: Created using 3d.hunyuan AI framework.Low Poly Style: Optimized topology, perfect for retro indie games, mobile projects, or low-poly scenes.Iconic Design: Retains the recognizable elongated body, smooth curves, and classic road presence of the 2001 Caprice.Lightweight: Highly optimized file size with efficient polygon count for fast loading and smooth performance.AI 3D generation research and showcases.

Chevrolet Caprice 2001

This is a somewhat cleaned up version of the full-sized bronze copy of David in Sioux Falls, SD. 

This full-size segmented brain, which sits inside a partial skull, features two halves — one showing the appearance of a normal, healthy brain. The second half is sectioned into three pieces revealing characteristics of various conditions. A Circle of Willis with aneurism is shown along with the damage to the brain from alcoholism, Alzheimer’s, aneurism, depression related tumor, seizure related tumor, migraine, multiple sclerosis, Parkinson’s disease, stroke, and subdural hematoma.

Be sure to check out the annotations for a tour of the brain!

# Technical
This is a scan of a plastic model created by GPI Anatomicals®. We created it using a GoScan 50.

# What next?
[See more human anatomy!](https://skfb.ly/oXpLP)

[See more GoScan models!](https://skfb.ly/oXpLN)

Asset Library

About These Assets