Cuween Hill Chambered Cairn, near Finstown, Mainland, Orkney, is a late Neolithic (c.3200-2300 BC) 'Maes Howe'-type tomb.  The tomb is located on the side of the hill and the floor is cut into sandstone bedrock.  The chambers are constructed from fine dry-stone walling with corbelled roofs.  The mound measures c.55 feet in diameter and the main chamber is 8 feet 6 inches tall.

The tomb was partly excavated by James Cursiter in 1888 and more extensively investigated by Malcolm M. Charleston in 1901.  The tomb contained at least 8 burials and the skulls of 24 dogs.  The latter may have been a totemic animal, but they were probably deposited in the Bronze Age rather than the Neolithic.  The tomb sites above the Neolithic settlement site of Stonehall, which was excavated by Prof Colin Richards in the 1990s. 

This site is managed by Historic Environment Scotland and is open to the public.  For more information see CANMORE: http://canmore.org.uk/site/2059

Modelled using 1200 photos taken with a Canon 70d.

Cuween Hill Chambered Tomb, Orkney

Model of a large (68cm or 27 inches wide) bronze shengding food vessel from southern China, now in the collection of the Minneapolis Institute of Art.

From the object's description on artsmia.org:

*Around the cauldron body are six kui (single horn) dragons in high relief climbing upward toward the lid. Supporting the vessel are three stout legs with stylized dragon masks cast into their shoulders. The surface is ornamented with interlaced dragons, incised scale patterns, and overlapping feather-like motifs. While most of the ornament was made by traditional piece-mold bronze-casting technology, the six dragons, with their complex, perforated shapes, were made separately with the lost-wax method.*

More information about the model here:

https://collections.artsmia.org/art/98381/shengding-food-vessel-china

Shengding Food Vessel, around 575 BCE

Faience baboon, 7th - 6th C BCE, about 16cm / 6 inches tall.

From the sculpture's gallery description:
"The baboon was usually associated with Thoth, one of the moon gods. This animal has a hole in the crown that once held a lunar disk sitting on top of a crescent moon, an attribute of Thoth. For a 2600-year-old artwork it is in remarkable condition, and though the animal is small in size, its posture and expression command authority."

More information about the model here:

https://collections.artsmia.org/art/126884/baboon-egypt

Baboon (Moon God Thoth)

Cambodian bronze Terminal in the Form of Garuda, 12th-13th C CE, now in the collection of the Minneapolis Institute of Art.

More information here: 
https://collections.artsmia.org/art/1780/terminal-in-the-form-of-garuda-cambodia

The model in VR / AR is larger than Garuda's actual size (18cm / 7 inches tall).

Terminal in the Form of Garuda, 12th-13th C CE

Bronze Indian Somaskanda, 14th or 15th C CE, now in the collection of the Minneapolis Instutute of Art. 

About 60cm x 70cm x 30cm (23 x 26 x 13 inches)

From its description on artsmia.org:

*'Shiva and his wife Uma sit next to each other on double lotus pedestals, between them a residual remnant of their small child, Skanda, now missing from the magnificent bronze. The standard format—known as Somaskanda—arose as early as the 6th century in temples from Tamil Nadu, and remains Shiva’s main manifest form today. In south Indian temples, bronze images play a huge role in devotional practice, where they are treated as living embodiments of the gods. The holes in the base indicate that this particular bronze would have been carried in processions outside the temple grounds.'*

More information:
https://collections.artsmia.org/art/6224/somaskanda-india

Somaskanda, 14th or 15th C CE

Curled rat netsuke by Suzuki Masanao, made in the second half of the 19th century CE. About 38mm ( 1 1/2 inches) in diameter. (Scaled in VR to about 10cm.)

A little more information about the object here:

https://collections.artsmia.org/art/37576/curled-rat-suzuki-masanao

Netsuke - curled rat

This is a totally sustainable project under construction in Amman, Jordan. Built by local stone using thick load baring walls 1 m width with different ceilings type like a cross vault, catenary vaults, domes on four squinches & Shallow domes, as well as trying to add a local architecture vocabulary from our regain ( arch details, patterns, Muqarnas....) our target to set this project as a good sample of traditional construction method and help others to start similar projects

مشروع بناء بيت من الحجر باستعمال اسلوب المعماري حسن فتحي، حيث الجدران الحجرية السميكة الحاملة للثقل والأسقف من القباب والقبوات المتقاطعة والقبوات العادية، وتم استعمال موروث بلاد الشام من مقرنصات وزخرفة وأقواس، في إضافة الطابع المحلي للتفاصيل المعمارية. نأمل دعمكم في نشر هذه الطريقة للبناء بدون حديد وخرسانة .

المشروع في منطقة شفا بدران ، عمّان ، الأردن

location: https://goo.gl/maps/wQFF85LZJDug5WLf9

Arcade & stair over an arch - MAS design office

Repositorio de modelos 3D de Ddiaz Design

![](https://www.dubicars.com/images/4b0af6/w_1300x760/swaidan-motors/05c01f6b-4d2a-4726-87f2-ec18836251ba.JPG)

Infiniti is now extending its Q70 family with the introduction of a long wheelbase variant, as well as the regular version, to the US and other markets. The additional 5.9 inches in the wheelbase not only increases the knee and leg space in the back but also greatly augments the athletic presence of the sedan.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a Infiniti 3d model

Credits: https://3dwarehouse.sketchup.com/user/u2e1cd68e-d595-4d99-9454-7258360a0f19/NURIEZARCH

2020 Infiniti Q70 Luxury 3.7

Emperor Scorpions (*Pandinus imperator*) are among the largest and most iconic scorpions in the world. Native to West Africa, they can grow up to 8 inches long and are known for their glossy black exoskeleton and powerful pincers. Despite their intimidating appearance, emperor scorpions are relatively docile and use their pincers more than their mild venom to subdue prey.

They thrive in humid environments like tropical forests and burrows, feeding on insects, spiders, and small vertebrates. Their nocturnal habits and sensitivity to vibrations make them stealthy hunters. In captivity, they’re popular among enthusiasts due to their manageable temperament and striking look.

While their sting is comparable to a bee’s, emperor scorpions play a vital ecological role and are studied for their fluorescent properties under UV light. Their blend of size, strength, and gentleness makes them a fascinating ambassador of the Scorpiones order.

Emperor Scorpion

low poly game ready Winchester 1887 Shotgun with custom engravings. 4K Texture included (not rigged). if you want to use this on your project dont forget to add credits! thanks!

Winchester 1887

Highly detailed industrial fishing vessel, heavy-duty commercial fishing boat, realistic 3D model, rugged engineering design inspired by heavy machinery. Large steel hull with visible weld seams, reinforced metal plates, functional crane arm for nets, hydraulic winches, thick industrial cables, rotating radar antenna, satellite dome, lifeboats on the side, weathered paint with rust and salt corrosion details, realistic ocean wear and tear.

Modular deck layout with fishing equipment: large fishing nets rolled on drums, fish storage containers, ice boxes, mechanical pulley system, metal railings, safety lights, exhaust pipes with smoke stains. Cabin with glass windows, navigation controls, spotlight lamps, antennas, ladders, and safety signage.

PBR textures, ultra-realistic materials, 8K texture resolution, realistic metal roughness, scratches, chipped paint, wet surface reflections. High-poly 3D model, game-ready topology but cinematic quality.

Kapal Penangkap Ikan Industri

A full-length khaki-brown leather coat is centered in the frame against a neutral gray background. The coat features a large, fluffy, taupe Mongolian fur collar and cuffs. A matching leather belt cinches the waist, with a rectangular buckle. The coat is buttoned up, with visible buttons down the front. The sleeves are long, with the fur cuffs extending past the wrists. Game ready.

![](https://user.uploads.dev/file/fe18ea437c2f7900fff30b5c7ebab58f.webp)

Khaki Brown Leather Coat with Taupe Fur Trim

Terracotta gladiators figurine showing a Thracian fighting a Hoplomachus.

Terracotta group of two gladiators fighting, each wearing brimmed plumed helmet, each armed with small shield on their left arm (left-hand figure holding round shield, right-hand figure holding square shield with central rib) and straight sword in their right hand. Figure to spectator's right raising his sword-arm and delivering a thrust to the neck of his opponent. Light greyish-brown clay (with occasional calcite inclusions (with mica), red and blue on helmet of left-hand figure, red on lower right leg of left-hand figure.

Both these types of gladiators had distinctively small shields. The Thracian's (right) was rectangular, that of the Hoplomachus was round. The Hoplomachus could also be armed with a spear.

Roman, 1st-2nd century CE. Made in Smyrna or Myrina, Turkey.
Height: 13.50 centimetres, 5.31 inches.
British Museum (1907,0518.4)

3D Printable | IA Design

Terracotta gladiators | 3D Printable

For complete workflow compatibility, we recommend downloading the Original format.The viewer version is intended exclusively for browser preview. In the original file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ correct object namesIf you are going to integrate the model into a project, download the source file.A moment of bliss for a young woman is captured in this 3D model. Eyes gently closed her lips pout as if poised for a passionate kiss or savouring a moment of pure joy. Elegantly attired she wears a black dress adorned with gold patterns that radiate under the spotlight. A black leather belt cinches at her waist adding an element of toughness to her feminine ensemble. Her feet are planted firmly in chunky soled black boots that command attention. A small purse clutched in front of her carries her essentials.

Golden Euphoria Chic Girl In Black

The quipe Pur Sang package enhances the Bugatti Tourbillon with advanced aerodynamic components like a dedicated front splitter bespoke rear wing with endplates and a specialized rear diffuser that boosts downforce and stability. It also features an 8 pipe exhaust system and carbon fiber engine cover inlays that contribute to both performance and a more aggressive stance. Newly developed directional wheels 20 inches in the front and 21 in the rear are uniquely designed for each side improving airflow to the rear radiator by up to 8 while minimizing turbulence.

Bugatti Tourbillon Equipe Pur Sang

The AMT Automag III is a single action semi-automatic pistol made by Arcadia Machine and Tool (AMT). It was created by Harry Sanford, inventor of the original .44 AutoMag pistol. The Automag III was principally chambered for the .30 Carbine cartridge, which was originally designed for the World War II-era M1 Carbine. It was also one of the few pistols available in the 9mm Winchester Magnum cartridge, but only the original AMT production pistols were made in this chambering, however; later Galena production was limited to .30 Carbine models.[3] The pistol is made of stainless steel and has an 8-round magazine.[4]
(copied from wikipedia)

lowpoly Automag III

For proper use, we recommend downloading the source format.The viewer version is intended only for use in the web viewer. In the Original format, the following are fully preserved:✔ original scene hierarchy✔ all materials without simplification✔ proper texture maps✔ proper object namingIf you plan to use this model in production, choose the original version.Mitutoyo Calipers. Top of ruler is mm bottom ruler is inches and the dial measures .001 . Modeled from a pair I inherited I believe this style is from the 90 s it s paperwork had it last calibrated in 94. Calipers can be opened by using the arrow empty which also turns the dial and adjustment wheel.

Dial Calipers

For production-ready use, we recommend downloading the original file.The converted file is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ native scene structure✔ all materials without simplification✔ accurate texture maps✔ original object namesIf you plan to use this model in production, select the original version.The Winchester Model 1873 is an iconic lever action rifle nicknamed The Gun That Won the West known for its reliable rapid fire capability and use in the American West.

Rifle Winchester 1873

For full functionality, we recommend downloading the source format.The Converted version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ original object namesIf you plan to use this model in production, choose the Original format.Discover AR3Designs versatile Crown Molding collection thoughtfully crafted to seamlessly blend into your projects. Each piece is sized in inches for precise integration and comes in separate modular parts concave convex and straight offering effortless customization for your architectural designs. Tailored for interior design and architectural visualization these BlenderKit assets exude elegance and flexibility for your creative ventures. Dimensions 6 X 3

Crown Molding Design25 6x3inches

Standard American white ceramic bathtub 18 X 32 X 60 inches

Standard Bathtub

fps shotgun:https://sketchfab.com/3d-models/winchester-double-barrel-ps1-low-poly-62f00fd84c034faaaf99ce6789a94d80 arms:https://sketchfab.com/3d-models/first-person-arms-e3c42c05b22944e5839deb8e003f0987#download

Fps Arms Rigged

Winchester Pugsley. 1918 Anti-Tank Rifle, (has no texture)
CREDITS ARE NOT REQUIRED FOR MY MODEL IN ANY GAME.

Pugsley

A 3D model of the Winchester Model 1897, created for an upcoming personal game project that I am currently involved in working on.

The Winchester Model 1897

For full functionality, we recommend downloading the original file.The converted file is intended for web viewing only. In the original file, the following are fully preserved:✔ original scene hierarchy✔ complete materials without reduction✔ correct PBR texture maps✔ correct object namesIf you intend to use the asset in a production environment, choose the source file.Discover AR3Designs versatile Crown Molding collection thoughtfully crafted to seamlessly blend into your projects. Each piece is sized in inches for precise integration and comes in separate modular parts concave convex and straight offering effortless customization for your architectural designs. Tailored for interior design and architectural visualization these BlenderKit assets exude elegance and flexibility for your creative ventures. Dimensions 7 X 3

Asset Library

About These Assets