Free 4K model of two weathered spray paint cans with scuffed labels, vibrant purple and orange splatters, worn nozzles and realistic grime.

Spray Paint Bottles 02

My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

My personal character FanArt practice & 3Dprint experiment. 

![some gif](http://i.giphy.com/3oz8xzqr3KtMNdKLDi.gif)

- Series [ Love Live! Sunshine!!](http://love-live.wikia.com/wiki/Love_Live!_Sunshine!!)

- Character [Watanabe_You](http://love-live.wikia.com/wiki/Watanabe_You) 

- Costume [Aozora_Jumping_Heart](http://love-live.wikia.com/wiki/Aozora_Jumping_Heart)

[Hi-res 3Dprint files posted on my Thingiverse](http://www.thingiverse.com/thing:1953480) 

- Design to print in 1:6 scale with 0.4mm nozzle. 

- Max clothes thickness are 1.2mm. 

- Use screw and pin to assemble. You can 3Dprint as size ref and buy some at hardware store. 

- [More poses](https://skfb.ly/YxXY)

- Other costumes [01](https://skfb.ly/X8vJ) , [02](https://skfb.ly/VsCU)

- [WIP archives Here](https://www.facebook.com/Johnnie3Dtalk/photos/?tab=album&album_id=1123363244443452) 

- [twitter post](https://twitter.com/wiriyapol/status/806428103215976448)

Yousoro! 青空 Jumping Heart [3Dprint]

Free 4K model of a weathered yellow garden sprinkler with dual nozzles, metal swivel, ribbed hose connector and scuffed wheeled base.

Garden Sprinkler 01

Psyche Revived by Cupid's Kiss at The Louvre, Paris (remix)
Removed voids in the model. Now it's correct to slice in Simplify3D.

Printed on [3D Printer Lad-1.0](https://3dladnik.wixsite.com/workshop/lad-1-0):
Nozzle - 0.3 mm
Layer - 100 μm 
support
Colorless ABS

![](https://i.pinimg.com/564x/13/6c/8c/136c8c90b15745b9bc0416c0398b1252.jpg)

3D Printable Psyche Revived By Cupid

The Three Graces at the Hermitage Museum, Russia (remix)
This piece is a rework of of the original by Jean-Jacques Pradier (1790 - 1852), created out of marble and presented to the salon in 1831. Based loosely from Botticelli's painting of the Three Graces in 'La Primavera', 1550.

[References:](https://3dladnik.wixsite.com/workshop/threegraces1)

Printed on [3D Printer Lad-1.0](https://3dladnik.wixsite.com/workshop/lad-1-0):
Nozzle - 0.3 mm
Layer - 100 ?m 
Colorless ABS

![](https://i.pinimg.com/564x/44/4c/81/444c81154449c5808fc4003262bec546.jpg)

3D Printable The Three Graces

This is a high-quality realistic drill machine 3D model designed for survival, adventure, construction, and crafting-based games. The model features procedural detailing and separated components, including an independent trigger button and a drill nozzle that can rotate for animation or gameplay mechanics.

Built with clean geometry and accurate proportions, this asset is ideal for interactive tool systems, workshop environments, repair simulations, or cinematic sequences. The spinning drill bit allows easy integration into gameplay logic for drilling, crafting, or construction mechanics. Optimized for real-time engines such as Unity and Unreal Engine.

If you like this asset and would like to support the work, please consider purchasing it on the FAB Marketplace.

#drillmachine #powerdrill #constructiontool #survivalgame #craftingtool #industrialprop #3dmodel #gameasset #gameready #openworldgame #unrealengine #unity3d #3dassets #indiegamedev

Realistic Drill Machine - High-Quality 3D Model

## Scanning
For scanning I placed the nozzle on the turntable with a good bit of blue-tack. When deciding to use blue-tack make sure it is not stressed too much so it doesn't contract after placing the part on it. For smaller parts I now mainly use my Omnifixio (helping hands for soldering) but it didn't fit the nozzle. 
Back to scanning: One rotation of the turntable was made at proper exposure, since the reflective metal and contrast between polished metal and black anodization is quite hard to scan, I covered the part in a coat of scan spray. As scan settings I used high resolution with a smoothing value of 20 (provides the best results from my experience).

## Post-Processing
After scanning I simply meshed the scan at high quality (highest settings may cause noise from my experience) and exported the mesh to Quicksurface where I aligned the scan and isolated the relevant part of the nozzle.

Bambulab A1 Nozzle - Matter and Form (MAF) THREE

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/LtWtb7](https://www.meshy.ai/s/LtWtb7)

Multi-nozzle fluid dispensing manifold

New fighters family. Based on cranked-arrow double delta wing from F-16XL with addition of PChN or active LERX from Su-57.
Air intake is inspired by F-16DSI, Boeing X-32 and Sukhoi Su-75.
Flat nozzle is taken from Su-57 prototype.
Family consists of unmanned loyal wingman drone, singleseater and twoseater variants. And naval versions of all three.

* Length: 16.5 m
* Wingspan: 10.9 m
* Height: 3.64 m
* Empty weight: 10 t
* Weapon bays: 1 big + 2 fast
* External hardpoints: 6

E-53B

**WILL NOT BE FUNCTIONAL & REQUIRES FINISHING**

  Scaled down & simplified model of the U.S Army M1952 Field Desk for 3d printing.
  
  Highly recommend using 0.4mm nozzle for the desk body & table top, 0.2mm one for the tiny handle & hinges.
  
  Not strictly tied to a specific scale (1/35, 1/16, etc..), but may be printed at 100mm in height for more apparent details.

  This version will not be functional due to it being merged into one main solid part.
  
**FOR WORKABLE VERSION CHECK OUT THIS**
https://sketchfab.com/3d-models/us-gi-vietnam-war-deployable-field-desk-18afc2d29be9415d98835c355c74b051

U.S G.I Field Desk (PRE-ASSEMBLED)

For proper use, we recommend downloading the Original format.The viewer version is intended exclusively for browser preview. In the original file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ proper object namingIf you are going to integrate the model into a project, download the original version.Premium hair dryer with modern design in white color. It has 4 nozzles for different types of hair. It is used for straight hair curly and wavy hair. You can change the color of the hair dryer. It uses simple shaders that are easy to understand. The wire is made through a curve and you can conveniently change its shape. You can replace one nozzle with another. The objects are separated but have parent relationships which simplifies management. Use it in a modern design or as a close up object.

Whie Hairdryer With Attachments On The Stand

Thanks for uploading! Such a nice model to print and build.

Compared to a friend's dreadnought and a goblin scrap walker. Printed on an SV06 with a 0.4mm nozzle and 0.08mm layer height. I printed this at 115%, with the exception of the jaw at 120%. I think maybe 100-110% overall might've been closer to normal Kans? I'm satisfied with it either way

3D Print of Size comparison

First mini printed with my new bambu lab a1 mini! It came out better than i expected with a .4 nozzle and .08 layers. Definately a great supportless model with great character design! You can hardly see the layerlines with the naked eye. The paint style is mostly slapchop with a wash.

3D Print of First mini with my new printer!

I designed this unit to hold art supplies like pens, drawing pencils, markers, and brushes while i worked on my pieces, my windsor newtons recommend tip up to allow the air to wick up the remaining moisture so it made since to have something. I liked the 45 hole design but I also wanted to add room for larger brushes so I also created a second top option with 29 small holes and 4 large holes. I also had a friend friend request an angle based option. In order to assemble this you will need to print the top file and the base file of your choice this will print all 4 of necessary posts to make a solid unit. This was designed as a friction locked concept and should require no glue. I printed this at 220c nozzle, 60c bed with Inland Black PLA Pro at .2mm layer height, 2 shell walls, and 15% infill gyroid, but your can choose whichever infill you'd like.    

Paint Brush Holder and Drying rack

Easter eggs with wavy design. You get 3 stl files. They are easy to print since retraction is not needed. Each layer (except for initial one) is one perimeter, therefore the printer head just goes round and round, starting next layer at the same point where it finished the last one. You can also use vase mode.  These models are available under a Private Use License. To unlock commercial rights, you need to be an active subscriber to a membership plan.  3D printing settingsNozzle: 0.4Line width: 0.35Layer height: 0.32Perimeter (wall line count): 1Infill: 0%Bottom layers: 1Top layers: 0Printable in vase / spiralized mode

Wavy Easter Eggs

-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws).-8 total models snap-fitted and then secured with a total of 25 size M3x12mm( or similar) nuts and bolts (phillips head recommended).-Optional stand for using the tray in upright position. The motherboard and pci cards can be directly screwed onto the tray stands/holes with generic motherboard screws. The best print-result for me was to print without changing orientation and using a 0.4mm nozzle for the snap-fitting connections.The taller models have 1mm horizontal support beams to be used with tree supports and are to be cut away.-Models are max 18.2cm in length I suggest cutting out one of the pci-slot beams if its in the way of inserting a thick hmdi plug. 02-27-2026 - added 3 extra screwholes on the extensions to actually make the model ATX.02-26-2026 - v1.1 updated the models, added an optional stand.02-25-2026 - corrected io-shield height and added extra holes for nuts/bolts to the extension parts.

ATX basic open pc case / test bench

Let’s celebrate my debut on MyMiniFactory with… well, a little blacksmith! The miniature stands on a base of about 2 inches, although the blacksmith itself has been scaled to the standard 32 mm size so that it matches a typical 1-inch miniature. Naturally, the file comes pre-supported and is ready to print on your resin printer. With the proper supports, it can also be printed on an FDM printer, although I recommend a 0.25 mm nozzle and a layer height of around 0.08 mm. As always, I’m available to answer any questions you may have about our products. Happy printing from the Velis Family!

My Mini Blacksmith (free)

Proper credit and appreciation go to Mario for these excellent models. This is a remix of @vinciminiatures’ Texturizer Rollers for Stone Detailing, adapted to fit my standard mini paint roller. I don’t remember the exact brand of the roller I used. It had a slightly unusual name, and I picked it up at a salvage store, so it may no longer be available. That said, the bare roller core measures approximately 3/4" (19.05 mm) in diameter and 3-3/4" (95.25 mm) in length. The rollers included here are sized as follows:  Smooth and Medium: 50 mm outer diameter Hard: 60 mm outer diameter (to accommodate the more aggressive texture)  Each roller cylinder is 95.25 mm tall with an inner diameter of 9.5 mm. Depending on your specific roller, you may need to adjust the fit slightly. This size provided a bit of tolerance while still fitting securely on my frame, with the spring end holding everything firmly in place. One end of each cylinder is beveled to make installation easier. All three rollers are included in a single STL. Realistically, if you’re printing one, you’re probably printing all of them. Print Settings  Slicer: Cura Printer: Sovol SV-07 Filament: Sovol PLA Nozzle Temp: 215°C Bed Temp: 60°C Layer Height: 0.12 mm Walls: 4 Infill: 10% Gyroid Supports: None Adhesion: Brim (12 lines)  These should also print well in resin if you prefer that route.  

REMIX - TEXTURIZER ROLLERS FOR STONE DETAILING

Proper credit and appreciation go to Mario for these excellent models. This is a remix of @vinciminiatures’ Texturizer Rollers for Stone Detailing, adapted to fit my standard mini paint roller. I don’t remember the exact brand of the roller I used. It had a slightly unusual name, and I picked it up at a salvage store, so it may no longer be available. That said, the bare roller core measures approximately 3/4" (19.05 mm) in diameter and 3-3/4" (95.25 mm) in length. The rollers included here are sized as follows:  Smooth and Medium: 50 mm outer diameter Hard: 60 mm outer diameter (to accommodate the more aggressive texture)  Each roller cylinder is 95.25 mm tall with an inner diameter of 9.5 mm. Depending on your specific roller, you may need to adjust the fit slightly. This size provided a bit of tolerance while still fitting securely on my frame, with the spring end holding everything firmly in place. One end of each cylinder is beveled to make installation easier. All three rollers are included in a single STL. Realistically, if you’re printing one, you’re probably printing all of them. Print Settings  Slicer: Cura Printer: Sovol SV-07 Filament: Sovol PLA Nozzle Temp: 215°C Bed Temp: 60°C Layer Height: 0.12 mm Walls: 4 Infill: 10% Gyroid Supports: None Adhesion: Brim (12 lines)  These should also print well in resin if you prefer that route.

For production-ready use, we recommend downloading the source format.The Converted version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ accurate texture maps✔ correct object namesIf you plan to use this model in production, choose the Original format.This elegant wooden space shuttle toy captures the wonder of space flight through a sophisticated dual tone timber design. The sleek aerodynamic fuselage is crafted from a pale light grained wood providing a clean contrast against the deep dark wood used for the delta wings vertical stabilizer and the trio of rear propulsion nozzles. Finished with a smooth tactile satin polish the model highlights the natural beauty of the wood grain while maintaining a modern minimalist silhouette. It serves as an inspiring decorative piece for a celestial themed nursery a science focused office display or as a high quality prop in a digital toy store environment.

Wood Space Shuttle Toy

Scaled down & simplified model of the U.S Army M1952 Field Desk for 3d printing.
  
  Highly recommend using 0.4mm nozzle for the desk body & table top, 0.2mm one for the tiny handle & hinges.
  
  Not strictly tied to a specific scale (1/35, 1/16, etc..), but may be printed at 150mm in height for ease of assembly (ofc it assemable), model may be parted and scaled to the same ratio (incase it dont fit ur budget aliexpress printer lol).

  One of my first project so its gonna be quite poorly optimized (lotta triangle):/

U.S G.I (Vietnam War) Deployable Field Desk

Elevate your interior decor with this stunning Geometric Spiral Vase. Designed with a perfect balance of aesthetics and functionality, this model features elegant flowing vertical ridges that create a captivating play of light and shadow. The thick, stable base ensures it remains upright even with larger floral arrangements, making it a perfect functional art piece for your home.

Optimized for both FDM and Resin 3D printing, this model is a great test for your printer's surface finish quality. For FDM users, we recommend using 'Vase Mode' (Spiralize Outer Contour) with a 0.6mm or 0.8mm nozzle for a sturdy, water-tight result. If printing with standard settings, use 2-3 walls and a 15% infill for the base. This emerald green-inspired geometry looks breathtaking in matte, silk, or translucent filaments. Bring a touch of modern organic design to your living space today!

Geometric Spiral Vase - Emerald Green Design

A double-chambered, zoomorphic whistle in the shape of a bird standing on its feet. It has two small wing-like protrusions; a round head with a tubular, grooved beak; two small, applied balls for eyes; and a small horizontal crest with a pinched edge. The blowing nozzle is located in the beak. Air passes from one chamber to the other, producing sound as the piece is moved from side to side while blowing. Its sound is similar to that of a bird that has been heard in the highlands of Sacatepéquez, Guatemala, but has not yet been identified.

 IDAEH Cultural Property No. 16.2.5.0508
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Asset Library

About These Assets