This is a 3D model of Bakari, a **Southern Right Rhino** (Ceratotherium simum) from **Perth Zoo**, Western Australia, which was initially scanned using an array of 20 Canon G16 cameras.  CG artist **Jer Bot** used the open source 3D animation software **Blender** (blender.org) to fully reconstruct the rhino. The mass of the Rhino is 2225 kg and its length is 2.1 meters. Reference photos were also used as a guide to create taxonomic features onto the 3D model using Blender's sculpting tools.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 56A - Southern White Rhino

The Gislinge boat was a 12th Century CE working boat found near the village of Gislinge, Denmark, in 1993. Dendrochronological dating puts its date of construction at around 1130 CE. It was probably used for fishing and goods transportation, and by the signs of wear and tear must have been 50 years old by the time it sank. This reconstruction is based off the Gislinge Boat Open Source Project by the Roskilde Viking Ship Museum (@vikingshipmuseum) , which can be accessed here: https://www.vikingeskibsmuseet.dk/en/professions/boatyard/building-projects/gislingeboat-2016

The project included the construction of various different experimental replicas based on the original find, and the publishing of all the plans so that other people around the world could build their own replica! In that spirit, I'm offering this model for free :) Enjoy, and check out the Viking Ship Museum's project website!

Length: 7.7m
Width: 1.5m
Draught: 0.25m

Gislinge Viking Boat

"The Hallwyl House, once home to the wealthy couple Wilhelmina and Walther von Hallwyl, is situated in the center of Stockholm, Sweden."

This is an attempt at squeezing the entirety of [1st Floor State Rooms The Hallwyl Museum](https://sketchfab.com/TheHallwylMuseum/collections/the-hallwyl-museum-1st-floor-state-rooms) into a single model, ready for viewing in webVR. The original models were decimeted and textures rebaked using the open source 3D editor [Blender](http://blender.org).

The original models were created by [Erik Lernestål](https://www.eriklernestal.com/index) for the musuem and are reused under [Creative Commons Attribution 4.0 International (CC BY 4.0) license](https://creativecommons.org/licenses/by/4.0/).

10 million polygons > less than 500k.

The Hallwyl Museum 1st Floor Combined

BGE Dragon 2.0

Here is a remake of my Dragon with new Textures and some improvements.
I improved the BGE logics so everything works fine in Blender 2.68a.
For an easy animation I have added some custom bone shapes.

On Blendernation: http://www.blendernation.com/2013/09/09/model-download-bge-dragon-2-0/

Downloads:

*   [Google-Drive](https://goo.gl/Xj20Io)

*   [Blendswap](http://www.blendswap.com/blends/view/70067)

*   [TF3dm](http://tf3dm.com/3d-model/black-dragon-rigged-and-game-ready-92023.html)

*   [ShareCG](https://goo.gl/9cgNZF)


Made with the free open source 3d program called Blender: http://www.blender.org/download/get-blender/



Controls in Blender Game Engine:
W: walk forward
Left mouse button + W: run forward
S: walk backward
W+A: walk to the left
W+D: walk to the right
Space: to spit fire
Middle mouse button : to open to the wings

[Test in Cloud Party](https://goo.gl/n7X3oP)

Dragon 2.0

This is a 3D animation of a Southern Right Whale (Eubalaena australis, Panel C, Fig. 1) which was reconstructed using the open source software Blender 3D (blender.org). Measurements taken from drone videos of right whales (see Christensen et al. 2019) were used to create an ellipsoid that served as a basis for the model. The measurements for height and width of the whale were taken at increments of 5% of the total body length. Reference photos were also used as a guide to create taxonomic features onto the ellipsoid using Blender 3D sculpting tools (primarily the dynamic topology function). These features included the fluke, pectoral fins, eye, and mouth arrangements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 55A - Southern Right Whale

Learn how to use open source Meshroom in this step by step tutorial on the Sketchfab Blog:
https://sketchfab.com/blogs/community/tutorial-meshroom-for-beginners

Low-poly version of the [default pipeline result](https://skfb.ly/6HNN9). The original model has been simplified using an automatic decimation process within Meshroom, to limit the number of vertices to a maximum of 100K.

It has been cleaned up in Meshlab (bounding box cut-out) and retextured in Meshroom.

**Details**

 - Meshroom 2019.1.0
 - Input: 220 images
 - Camera: Sony A7S II

Buddha - 100K Vertices Decimation

This is a 3D model  of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60A - Cyprus Racer Snake

Aka "Polo".
This is a simple base for any Sprunki character, the face is a texture to allow for easy change.
This model is mine and free to use for anyone, no credit is required.

Sprunki and it's characters were created by **NyankoBfLol**.

**Face texture was grabbed from the Open Source Sprunki build.**

Sprunki Base

This is a 3D model of a **Sling tailed Agama lizard** (*Stellagama stellio cypriaca*) scanned using the Beastcam MACRO on a live lizard in Cyprus. The mass of the lizard is 78 grams. CG artist **Jer Bot** retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos.  The construction of this model is part of the post-doc research of Dr. **Savvas Zotos** (POST-DOC/0916/0034)(https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 59A - Sling Tailed Agama

This is a 3D mesh of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. Both a "coiled" and "straight" snake are provided.  The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60B - Cyprus Racer Snake Mesh

**Licensed under CC-Attribution**: citing is cool!

*Hint: Follow the righteous path of annotations* ;)

Scanned and processed with Open Source software:

* scan with Colmap and OpenMVS
* post-process within blender and [BakeMyScan](http://bakemyscan.org) (4.2M -> 15k tris)
* texture correction with GIMP

Thumbs up to Philippe, the owner of my neighboorhood antiques shop ([La Brocante du Phare](http://goo.gl/szA4Sa) in Roscoff), who agreed to lend me this statuette but did not have much info: It is a buddha, is not made out of Jade, is heavy and about 25cm tall ;)

![](https://i.imgur.com/Ok55RcK.jpg)

My scanning "rig": Canon EOS 1100D (one of the cheapest DSLR 6 years ago), cheap Amazon lens-flash, Ikea furniture. And yes, I used my paper bin !

![](https://i.imgur.com/OIXJMgf.jpg)

Colmap gave better results than Photoscan... 146 pictures.

![](https://i.imgur.com/1tGa9rc.jpg)

I had to manually carve (and smooth) the space between the arm and the body.

![](https://i.imgur.com/JNVawgD.jpg)

Processing...

Open Source Buddha

This is a modified, repaired, resized and colored version of the second model from ‘BodyParts3D’.

This model has been mixed with an adapted version of their first model, and completed to form a whole open source 3D Human Anatomy Atlas that can be downloaded on this page: 
https://www.z-anatomy.com/

The following pages allow to be kept informed of the evolution of the Atlas: 
https://www.linkedin.com/company/z-anatomy 
To contribute buildin open source 3D models of anatomy: https://discord.gg/QkDMuZV32V

This model is meant to preview the content of the Atlas that is organized within Blender according to the latest version of the Terminologia Anatomica (TA2-2019).

Angiology

Program open sources building 3D UTA JAKARTA UNIVERSITY

3D Universitas 17 Agustus 1945 JAKARTA

Open source, 3D printed face shields, that require no tools and no elastic band for assembly. All you need is a transparent sheet - can be a binding sheet or even cut-out PET bottle and any string or band.

Takes A4/A3 or Letter sized sheets, self-tightening and clip-on. Printing and giving out to workes in need right now, set of two takes apx. 2h 40m

**Download files:** we.tl/t-nlCgMYQu6H

Face Shield - Open Source - v.5.2

A character model based on his own concept, based on a reference photo (from an open source) of a waffle with blueberries, cream and chocolate with mint leaves

The model is completely hand-painted and was made to teach drawing using a graphics tablet

It has an animation topology and some insides (tongue and jaws)

**!!!** All textures are **udims**, they can be used in one material (when configuring the material in the Blender, change the Single Image to Udim), but now there are 4 materials on the model so that you can upload it here

Made with Blender and Substance Painter

Free Strawberry and chocolate waffle Chibi Neko

Another batch of scanned sticks !

The sticks are in .fbx format, and each one is made of 150 triangles, and comes with 256px albedo and normal maps.

If you need high resolution of those props or different file formats, you'll probably find what you're looking for on the [Store version of this model](https://sketchfab.com/models/448b03c40ace4833abc15f928905c86c), which comes with 5 different LODs for each model, the higher ones having 15k triangles and 4096px textures.

I also made a model made of more than 2000 instances of those assets to have an idea of the possible WebGL performance: ["That's one big pile of stick"](https://sketchfab.com/models/ded075151a294ad094b43903ba2f8f59).

Licensed under **CC-attribution**: feel free to re-use them with the appropriate credit, and do not hesitate to drop a comment if you used them for your own creations, I’d be happy to know !

Created with love and Open Source tools only: Colmap, OpenMVS, Blender and [BakeMyScan](http://bakemyscan.org).

Lowpoly Sticks - Free Download

A bunch of rusty tools, scanned directly from my toolbox, and optimized to lowpoly PBR props with Open Source tools only: Colmap, OpenMVS, Blender and [BakeMyScan](http://bakemyscan.org) !

Should you need them, all the LODs you might ever dream of for this collection are [available on the Store](https://skfb.ly/6FSYn):

* 15k tris - 4096px
* 5k tris - 2048px
* 1.5k tris - 1024px
* 500 tris - 512px (the ones you see here!)
* 150 tris - 256px

These assets are especially optimized for realtime applications: VR, AR, WebGL, game engines, mobile apps, kitbashing... Here is an example of particle instancing with those props: ["The Toolball"](https://skfb.ly/6FSYs).

Licensed under **CC-attribution**: feel free to re-use them with the appropriate credit, and do not hesitate to drop a comment if you used them for your own creations, I'd be happy to know. 

And if you enjoyed those assets, you might find other interesting stuff in [this lowpoly collection](https://skfb.ly/6FSYx) ;)

Asset Library

About These Assets