A high-poly Zbrush model ready for 3d printing.  I have printed this model on my Anycubic Photon resin printer - see pictures below.  I am planning to do another version in an action pose - not sure what yet - any ideas?  Tip:  When preparing the model for painting - be careful of the chin straps hanging from the helmet - very delicate!

![](https://i.imgur.com/kBEPPS3l.jpg)
![](https://i.imgur.com/RPDoCAUl.jpg)
![](https://i.imgur.com/nI8t6ZPl.jpg)

US Soldier WW2 - 3d Printable - Free

A high-poly Zbrush model ready for 3d printing - I know it doesn't look as if it will print, but it will - see pictures below.  I have based the model on pictures of the Tour de France showing one of the sprinters going over the cobblestones.   When you download this model you will get an STL file sized to fit the Anycubic Photon or similar spec resin printer.  The trickiest part of the process is removing the supports without cutting through part of the bicycle!  I have also provided a link below to my Chitubox file for this model with all of the supports I put in place - download main model first please.

Cobblestone base for the cyclist model:   https://www.dropbox.com/s/jmq1c7krpmbbd4e/Base_cyclist_02.stl?dl=0

Chitubox file of cyclist with supports:      https://www.dropbox.com/s/2ry30wzjknlmwqg/Cyclist_02%20Chitubox.chitubox?dl=0

![](https://i.imgur.com/OBKfwnql.jpg)
![](https://i.imgur.com/j8rT5Kvl.jpg)
![](https://i.imgur.com/ziwFVRCl.jpg)
![](https://i.imgur.com/VLKe19E.jpg)

Cyclist - 3d printable

Bring a touch of fantasy to your desk with this adorable Tiny Dragon Fledgling! This stylized 3D model features a round, emerald green baby dragon sitting snugly inside a stone-grey eggshell. Designed with 3D printing in mind, it boasts clean lines and optimized geometry to ensure a smooth printing experience with minimal supports. Key Features: - Stylized aesthetic with vibrant scale details and glossy golden horns. - Optimized for both FDM (PLA) and Resin (SLA) printers. - Perfect as a desk companion, gift, or tabletop gaming accessory. Print Settings Recommendations: For FDM printers, we recommend a layer height of 0.12mm to 0.16mm for fine detail. Use a 10-15% infill and tree supports for the chin and horns. For Resin printers, standard settings will capture the intricate scale textures beautifully. This model is a must-have for dragon lovers and collectors of cute 3D printed creatures!

Cute Baby Dragon in Egg - 3D Print Dragonlet

Cyberpunk smart pistol – print-ready STL.

Includes pre-supported parts and optimized geometry to reduce overhangs and print failures. Clean topology ensures sharp detail and consistent results on resin printers.

Designed for easy assembly and high-quality finishing.

For personal use only unless licensed.

yukimura-smart-pistol

Bring attitude and style to your 3D print collection with this Streetwear Taz Sculpture STL! Inspired by the iconic cartoon character, this design features Taz in a modern streetwear outfit with a bold urban vibe—perfect for collectors and creators who love unique stylized figures.  This model is carefully designed as a multi-part STL file, making it easier to print with high detail and precision. It is highly optimized for resin printers, ensuring smooth surfaces, sharp details, and a premium collectible finish. FDM users can also print it, but resin printing is strongly recommended for the best results.  Whether you're creating display pieces, selling printed models, or adding to your personal collection, this Taz sculpture stands out with its trendy fashion style and dynamic pose.  Features:  Unique streetwear-style Taz designMulti-part model for easy printing and assemblyHigh-detail sculpt with smooth surfacesPerfect for painting and customizationIdeal for collectors and displayPrinting Recommendation:  Best results with resin printers (SLA/DLP)Supports required for optimal qualityScale as needed for your printer sizeDownload now and bring this stylish, modern Taz to life!

Streetwear Taz Sculpture STL (MULTIPARTS)

"This is a pre-supported miniature from Armoured Up Minis designed for use with Pathfinder, Starfinder, D&D and similar games. It is scaled for 32 mm, and ideal for resin printers. All models we produce are totally free.  Each month we release 15 new free models based on descriptions and art from Pathfinder rulebooks. If you would like to receive updates or help us out, please visit our Patreon (https://www.patreon.com/ArmouredUpMinis) or our Discord server: (https://discord.gg/tQWU62Bvnu)  This model uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy (paizo.com/licenses/communityuse). We are expressly prohibited from charging you to use or access this content. This model is not published, endorsed, or specifically approved by Paizo. For more information about Paizo Inc. and Paizo products, visit paizo.com)"

Adult Horned Dragon

Bandersnatch

Despair Archdragon

Doldrums Heap

Fuath

Sedacthy Marauder

Sedacthy Scout

Sedacthy Speaker

Sinspawn

Xulgath Leader

Xulgath Skulker

Xulgath Warrior

Zombie Hulk

Zombie Plague

This free miniature is a sample from the "Forest Axe Gnomes – Warband of 6 – Au petit soldat" pack.   If you like this gnome, the full warband with 5 additional unique poses is available in the main pack.   Scale: 32mm heroic scale (compatible with most 28-32mm wargames) Actual model height: approx. 19mm eyes to toe (gnomes are a small race) For 28mm scale: resize to 87.5% in your slicer Recommended: resin printer (FDM not tested)   Au petit soldat – handcrafted miniatures for tabletop adventures.

Forest Axe Gnome – Free Sample – Au petit soldat

High-quality Chair STL 3D model for 3D printing.

✔ Ready for FDM & Resin printers
✔ Clean and simple design
✔ Easy to print
✔ Perfect for decoration or diorama

File format: STL
Instant download after purchase.

Chair STL 3D Model for 3D Printing

Elevate your interior decor with this stunning Geometric Spiral Vase. Featuring a sophisticated honeycomb texture and a modern spiral silhouette, this model is specifically engineered for high-quality 3D printing. The design ensures maximum stability with a weighted base and is optimized for support-free printing, making it an ideal project for both beginners and pros. This versatile model is perfect for FDM printers using PLA, PETG, or specialty matte filaments to achieve that elegant emerald look, and it also performs beautifully on large-scale Resin printers. Use it as a standalone art piece or a functional dry flower holder. Print Settings Recommendations: - Layer Height: 0.15mm - 0.25mm - Perimeters: 2-3 for strength - Infill: 10-15% (or use 'Vase Mode' for a decorative version) - Supports: None required - Material: FDM (PLA/PETG) or Resin

Geometric Spiral Honeycomb Vase - No Supports

A simple pen holder for attaching to a wall with a magnetic sheet. 
Suitable for Pens of <20mm diameter. 

Prints support free on a resin printer, might also work on a filament printer tho. 
 
I recommend using a tough resin, as the Hex lattice is quite filigree.

Wall Mount Magnetic Pen Holder (20mm)

Enhance your home decor with this stunning Geometric Emerald Honeycomb Spiral Vase. This model features a sophisticated organic texture blended with a modern spiral silhouette, specifically designed to catch the light and highlight the matte emerald finish. 

Engineered for flawless execution, this vase is optimized for 3D printing without any support structures, making it an ideal project for both beginners and professionals. It is fully compatible with FDM printers (using Spiral Vase Mode for a quick print) and Resin printers for a high-detail luxury finish. 

Recommended Print Settings: For FDM, use a 0.4mm to 0.6mm nozzle, 0.2mm layer height, and enable 'Vase Mode' or 'Spiralize Outer Contour'. For a watertight result, slightly increase your flow rate or use a larger nozzle. Whether used as a centerpiece or a functional planter, this organic geometric design brings a touch of modern elegance to any room.

Asset Library

About These Assets