É uma máscara e talz

O concept foi inspirado (para não dizer copiado) do artista [Tom Banwell](http://tombanwell.com/), que faz umas máscaras muito loucas.

*"Na verdade eu acho que foi ele quem copiou meus pensamentos e os organizou e concretizou utilizando de uma das muitas funções de uma míriade mecânica inerdimensional constipada ou algo do tipo"*

Máscara Peste Negra Estilizada

A wooden stave vessel oval in shape which served as a bathtub for bathing little babies.
Only babies were bathed in this kind of bathtub, known locally as a kompacka. Great importance and ritualistic significance were attached to the first bath immediately after childbirth. The midwife responsible for this bath was called a babica. The activities performed at that time were thought to have a positive impact on the child’s future. Wanting the child to stay healthy and pretty, milk was poured into the water or a pinch of salt was added. After bathing, the water was poured into a place scarcely visited, over the side of kompacka where the baby kept its feet. It was commonly believed that if somebody did not follow such stipulations it might have had a bad effect on the child’s health.

ID no.: E/2212/MT

Time and place of creation: before 1939, Podhale, Poland

Museum: The Dr. Tytus Chałubiński Tatra Museum in Zakopane



Digitalisation: RDW MIC, Virtual Małopolska project

Baby bathtub – “kompacka”

License: **CC0**  
  
緑色型幼虫, Larvae, green type. 
  
Animalia 動物界  
　Arthropoda 節足動物門  
　　Insecta 昆虫綱  
　　　Mantodea カマキリ目  
　　　　Mantidae カマキリ科  
　　　　　Tenodera オオカマキリ属  
　　　　　　Tenodera angustipennis チョウセンカマキリ

CC0 チョウセンカマキリ緑色型  幼虫, Korean Mantis

License: **CC0**  
  
褐色型オス, Green type male. 
  
Animalia 動物界  
　Arthropoda 節足動物門  
　　Insecta 昆虫綱  
　　　Mantodea カマキリ目  
　　　　Mantidae カマキリ科  
　　　　　Tenodera オオカマキリ属  
　　　　　　Tenodera angustipennis チョウセンカマキリ

CC0 チョウセンカマキリ ♂ Korean Mantis, T. angustipennis

License: **CC0**  
  
褐色型幼虫, Larvae, brown type. 
  
Animalia 動物界  
　Arthropoda 節足動物門  
　　Insecta 昆虫綱  
　　　Mantodea カマキリ目  
　　　　Mantidae カマキリ科  
　　　　　Tenodera オオカマキリ属  
　　　　　　Tenodera angustipennis チョウセンカマキリ

CC0 チョウセンカマキリ幼虫 Korean Mantis, T. angustipennis

License: **CC0**  
  
An egg cluster 
  
Animalia 動物界  
　Arthropoda 節足動物門  
　　Insecta 昆虫綱  
　　　Mantodea カマキリ目  
　　　　Mantidae カマキリ科  
　　　　　Tenodera オオカマキリ属  
　　　　　　Tenodera angustipennis チョウセンカマキリ

CC0 チョウセンカマキリ卵塊 Korean Mantis, T. angustipenni

Tripod mushroom-shaped stone sculpture with conical supports, vertical stem (stipe), and flattened cap (pileus). A grooved face is visible on the midsection of the body. Traces of blue pigment remain on the supports and the cap, indicating the sculpture’s original painted decoration.
 IDAEH Cultural Property No.1.2.144.0002
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Mushroom Stone with Grooved Face

SOCKETSINFO:My recommendation: This system is optimized for these clips using 5mm ball magnets. It requires an investment in ball magnets. Inserting the magnets is a one-time task that you can easily do during a movie night or two. After that, you’ll have a system that lets you assemble setups just like LEGO. Enjoy the Power of Ball MagnetsTIP:Depending on your Scaling you should try the Clips for Downscaling or Upscaling(all 3 Clips optimized for 5mm ball magnets) -> use "C_SOCKET-CLIP_80downscaling.stl" printing at 80% scale-> use "C_SOCKET-CLIP.stl" printing at 100% scale-> use "C_SOCKET-CLIP_120upscaling.stl" at 100% scale OpenLOCKINFO:OpenLOCK Clip System by Printable Scenery:My recommendation if you can't or don't want to use magnets and would like to use a modular SystemTIP:Depending on your Scaling and your Print Result you may want to scale the Clips (they fit then tighter or stronger!)Please make sure you test print your clips before printing them in large quantities for your project! LOCKSINFO:My own clips: Not suitable for modular setups. Designed for permanent setups in combination with adhesive. There are also adapter clips available to connect to SOCKETS or OpenLOCK.TIP:Depending on your Scaling and your Print Result you may want to scale the Clips (they fit then tighter or stronger!)Please make sure you test print your clips before printing them in large quantities for your project! Any Questions? Please get in touch and join my Discord: https://discord.gg/m2APf43w7g

Diorama Tiles Clip Collection and Locking information

Tripod stone mushroom with a convex cap (pileus) featuring peripheral grooves. The stipe is curved and convergent in form, supported by three oval legs.
 IDAEH Cultural Property No.1.2.118.0430
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Tripod Mushroom Stone

Sofa Chair

Its a plant from Stipa Tenacissima specie

Plant Stipa Tenacissima

Roll the unknown with an eldritch altar dice tower that merges cyclopean stonework with writhing tentacled bas-reliefs—a functional tabletop focal piece for cosmic-horror campaigns.

WHAT'S INCLUDED:
• STL file optimized for both FDM and resin printing (100mm base unit scale, prints 150–200mm height)
• GLB bonus file for 3D viewers and augmented-reality preview
• Recommended print scale: 28mm tabletop-compatible, desk-display ready
• Single-piece printable mesh with integrated dice chute

PRINT SETTINGS & COMPATIBILITY:
• FDM (PLA/PETG): 0.2mm layer height, 15–20% infill, no supports required (geometry engineered at 45° print angles for support-free output)
• Resin (standard UV cure): 0.05mm layer height, 25% infill, minimal localized supports at tentacle joints if needed
• Minimum wall thickness 1.5mm throughout; all overhangs ≤3mm for printer compatibility
• Weathered stone surface texture via high-poly stippling; geometry tested for both FDM and resin without scaling artifacts

DESIGN DETAILS:
Irregular, …

Lovecraftian Dice Tower STL | Elder God Altar…

Tripod stone mushroom with a convex cap (pileus) featuring peripheral grooves. The stipe is curved and convergent in form, supported by three oval legs.
 IDAEH Cultural Property No.1.2.118.0434
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

For proper use, we recommend downloading the original file.The converted file is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ original object namesIf you plan to use this model in production, download the source file.Stipped Leather Arm Chair

Asset Library

About These Assets