Raw scan made on cinema movie projector that is standing in Kijów Centrum Cimena in Kraków, Poland
It was used for 35mm tape. Produced in the 1961 by Łódzkie Zakłady Kinotechniczne in Poland. The projector was designed for cinemas with rooms up to 1000 seats. It was then one of the most popular models used in Polish cinemas

The projector was equipped with an aspherical mirror with a diameter of 356 mm and a focal length of 120 mm. The standard lens provided by the manufacturer was Polkinar 1.8 / 100

The basic equipment of the projector was an optical sound reading system with two exposure bulbs - one in the working position, the other one in reserve (both fixed in the rotating holder, which allowed for exchange without interrupting the projection). In addition, the projector could be equipped with a 4-channel magnetic sound pickup

The projector was powered by a three-phase asynchronous motor. The engine was started using an automatic starter.
https://youtu.be/-xr1BMyKNWI
MusicInfo: Piano by AShamaluevMusic

Cinema Movie Projector AP5 - 1961

# Porsche 911 turbo s 
___
At the heart of the Porsche 911 Turbo S lies a new 3,700 cc flat-six engine with variable turbine geometry (VTG) turbochargers, delivering 70 more horsepower than its predecessor. The maximum torque is 800 Nm (an increase of 50 Nm), and it accelerates from 0 to 100 km/h in just 2.7 seconds (a 0.2-second improvement) using the 8-speed PDK transmission customized for the Turbo. The top speed remains at 330 km/h.
The Porsche 911 Turbo S is the ideal sports car, combining power, dynamics, and comfort. It’s available in both coupe and cabriolet forms, boasting 478 kW (650 hp). Notably, it features wider front wings by 45 mm and a wider rear by 20 mm, making it the widest 911 production car to date. Additionally, it comes with larger tires specifically designed for the Turbo performance and exquisite design.
___
**Contact**

**3dcstudio.info@gmail.com**





**Support : https://ko-fi.com/3dcarsstudio**

Porsche 911 Turbo S

The Erich Konzept I model along with its legendary camouflages exported from World of Tanks Blitz.

1. Erich Konzept I ("120 mm Rh2B") (Base)
2. Erich Konzept I ("152 mm Rh2B") (Base)
3. Erich Konzept Bastion ("120 mm Rh2B")
4. Erich Konzept Bastion ("152 mm Rh2B")

Please keep in mind that any models I upload are property of **[Wargaming.net](http://wargaming.net/)**. I do not claim ownership to them.

Erich Konzept I

The T28 model exported from World of Tanks Blitz.

1. T28 ("90 mm AT Gun T15E2")
2. T28 ("105 mm AT Gun T5E1")
3. T28 ("120 mm AT Gun T53")

Please keep in mind that any models I upload are property of **[Wargaming.net](http://wargaming.net/)**. I do not claim ownership to them.

The Carl Gustaf 20 mm Pvg m/42 or pansarvärnsgevär m/42 is an anti-tank recoilless rifle chambered in 20×180mmR Bofors. This is the first weapon in the Carl Gustaf recoilless weapon family and later turns into the well-known Carl Gustaf 84 mm recoilless rifle. Designed in 1940-1942, Sweden.

This model come with a ZF-4 scope and a fired cartridge behind the breach.

Carl Gustaf 20 mm Pvg m42 (Low-Poly)

For production-ready use, we recommend downloading the Original format.The converted file is intended for web viewing only. In the source file, the following are fully preserved:✔ full scene structure✔ complete materials without reduction✔ proper texture maps✔ original object namesIf you intend to use the asset in a production environment, select the Original format.Window 2080x1420 mm

Plastic Window

The AMX 50 Foch (155) model along with its legendary camouflage exported from World of Tanks Blitz (Update 4.8.0).

1. AMX 50 Foch (155) (Base)
2. Foch Destroyer

Before the AMX 50 Foch (155) received the "155 mm AC SA58 mod. 2", it had a second (technically stock) 120 mm gun , which was apparently tested by super testers. However, it never got added to live servers and was ultimately removed when the aforementioned gun got added as a second option.

Please keep in mind that any models I upload are property of **[Wargaming.net](http://wargaming.net/)**. I do not claim ownership to them.

AMX 50 Foch (155) (Removed "120 mm AC SA46")

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-19444.555.1](https://www.online.landessammlungen-noe.at/objects/1516090)

**Material:** Ceramic

**Dimensions:** H.: 220 mm Rim diam.: 180mm

**Dating:** 1050 - 800 BCE

A conical-necked vessel made of light to grey-brown clay. The surface is smoothed and graphited. 
At the base of the vessel's neck, horizontal flutes are present. The vessel's decoration extends from the shoulder area to the belly, comprising vertical sets and individual flutes. In addition, vertical clusters of flutes are observable above the protruding knobs.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Vessel

(Note: The original file name "Masaüstü Kağıt Tutucu" translates to "Desktop Paper Holder" in Turkish.) I designed this practical desktop organizer to keep your workspace tidy and your note papers easily accessible. The staggered (left/right) slot design allows you to grab a single piece of paper effortlessly without messing up the stack. Key Features: Upper Slots: 90 mm wide, providing a perfect fit and easy access for standard 85 mm note papers or sticky notes.Bottom Slot: A wider 120 mm section at the base, ideal for larger memo pads or storing multiple smaller stacks side-by-side.File Formats: I have included STL, 3MF, and STEP files so you can print it immediately or easily remix and adjust the dimensions to fit your specific needs.Print Settings: I printed mine with the following settings, but feel free to use whatever settings or materials work best for you! Supports: NoResolution: 0.20 mmInfill: 15%Material: PLA (Any material will work just fine!)Happy printing! If you print this, please share your makes—I'd love to see how it looks on your desk! If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated!Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

Desktop Note Paper Organizer

Clay cutters in the shape of a circle Sizes: 15 mm, 20 mm, 25 mm, 30 mm and 40 mm All my cutters have a knife edge design to get a clean cut and are therefore very strong. Dimensions are taken from the longer, inner side. The height is 10 mm and the cutting edge is 0.4 mm. Print with "Detect Thin Walls": ON

CIRCLE CLAY CUTTER

Clay cutters in oval shape  Sizes: 15 mm, 20 mm, 25 mm, 30 mm and 40 mm  All my cutters have a knife edge design to get a clean cut and are therefore very strong.  Dimensions are taken from the longer, inner side.  The height is 10 mm and the cutting edge is 0.4 mm.  Print with "Detect Thin Walls": ON

OVAL CLAY CUTTER

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-22958.8](https://www.online.landessammlungen-noe.at/objects/1117027)

**Material:** Gold plated silver

**Dimensions:** Ring head 20 mm

**Dating:** 1250 - 1400 mm

Gold-plated silver ring with a round ring plate. The central motif is of a mythical creature advancing to the right. It is accompanied by a six-pointed star on the right and a dot on the left. The ring band is characterised by its solidity, the presence of a roughly circular cross-section, and a widening and flattening towards the ring shoulder. A distinct transition into the ring plate can be seen clearly.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Gold-plated silver ring

For 3D printing I'd recommend you download the files from [this link](https://drive.google.com/open?id=1FngoCUdXCsACHv5l3tAd7YFDRh9EFTD8) instead.

If you like the model please consider sending me a donation via [PayPal.](https://www.paypal.me/mhagyak)

Here's a 
[photo album of the print.](https://www.flickr.com/photos/138687445@N03/sets/72157671429051850) (The photos here are from an older version of the model)

The model consists of a total of 47 parts. Once printed out and assambled, the overall length of the model is 1220 mm.

It has 2 interlocking joints, therefore the model can be taken apart into 3 parts for easier tranportation and storage. The bipod is foldable. The charging handle can also be screwed in/out. The receiver and grip has empty space inside for electronics. It has a functioning trigger, all you need to do is to add a spring. The rear sight can be folded in as well. The barrel has T-tracks attached to it.

資源庫

關於這些資源