Model for Historically Accurate Game Jam 1

Trenton - Celtic Tent

Das Freilichtgelände in Schwarzenbach besteht derzeit aus acht Gebäuden. Diese erlauben dem Besucher Einblicke in verschiedene Bereiche des keltischen Lebensalltags. Hier sieht man das Handwerkerhaus in Pfostenbautechnik mit Riegelwänden aus Eichenholz sowie den Speicherbau mit Blockwänden auf Schwellbalken in Fichte.

EN

The open-air museum in Schwarzenbach currently consists of eight buildings. These allow the visitor insights into different areas of Celtic everyday life. Here you can see the craftsmen's house built using the post and beam construction technique with timber walls made of oak and the storage building with log walls on beams in spruce.

[blog](https://celtovation.wordpress.com/)

[homepage](http://www.schwarzenbach.gv.at/Archaeologisches_Freilichtmuseum)

Schwarzenbach - houses with interior

Artio the grizzly she-bear and her unborn twin cubs Urso and Ursa, petrified by the cockatrice at the fictional Celtic Heights theme park in the fictional city of New Gary, Indiana, USA.

Artio and cubs, turned into stone

I watched the Twilight films for the first time and noticed that the house design changed throughout the movies, especially the back section. Curious about this, I started looking for original set plans from Celtic Film Studios and found out that the first film was actually shot at the real Hoke House in Portland. However, for the sequels — particularly Breaking Dawn — a replica set was built, which resulted in noticeable design changes, especially at the back and on the east side. In fact, the entire rear section underwent major modifications. For example, the large concrete pillar was replaced with three separate supports, giving the house a significantly different appearance. Here is a link for the Full Texturered Sketchup model:https://drive.google.com/file/d/1WWnNfXKvAq8mTWRPN1Npgdxuh2unjo3d/view?usp=sharing

Cullen House from Twilight (+Skp Download Link)

This is a one-stroke cross-shaped knot domain transformed into a closed tubular mesh with woven crossings and verified topology. 
Generated, not hand-modeled: the Celtic Cross starts as a gate-constrained one-stroke path on a 30-grid cross domain, then becomes a Catmull–Rom ribbon and a 10-sided tube via parallel-transport framing and z-lift weaving. 
Its unique mechanism is a ring inscribed into four arms, with knotwork continuously filling both the circle and the axial cross
The generator builds it as a circular ring inscribed in a four-arm cross, then fills both the ring and the arms with continuous knotwork so the form reads as one braided spatial system. 
In 3D, the Celtic Cross gains a strong ceremonial mass: the central ring stabilizes the object while the four arms extend as balanced directional axes, giving the piece the presence of a carved ritual sign translated into full volumetric topology.

Generated by PAPP Framework.

04_celtic_cross

This model was generated using Meshy(https://www.meshy.ai)'s AI toolkit. It provides tools that effortlessly turn human imagination into stunning 3D models.

If you're interested in this model, visit the model page on Meshy to explore more about it: [https://www.meshy.ai/3d-models/Celtic-Knot-Dagger-v2-019e0cef-3141-77f6-a018-fe606065dd7e?utm_source=sketchfab](https://www.meshy.ai/3d-models/Celtic-Knot-Dagger-v2-019e0cef-3141-77f6-a018-fe606065dd7e?utm_source=sketchfab)

Амулет кинжал

100Hex_Celtic_knot_06

A 3D model of what the Dagda (chieftain of the Celtic gods) could look like in SMITE 2

The Dagda (SMITE 2) Model

This object is a one-stroke dense knot domain extruded into a closed 3D tube mesh, using the PAPP-OSG route from constrained path to validated woven geometry.
Generated, not hand-modeled: the Dara Knot begins as a gate-constrained one-stroke path on a 32-grid dense circular domain, then is materialized as a Catmull–Rom ribbon and a 10-sided tube with parallel-transport framing and z-lift weaving. Its signature is maximum crossing density packed into a single closed oak-root knot field.
Dara Knot is the most compact and crossing-rich of the set: a filled circular Celtic field built to maximize interlace density, so the eye reads not a single emblem but a continuous root-like network. Inspired by the oak-root 
Dara tradition, it behaves like a woven infrastructure inside a disc boundary, with compressed over/under rhythm, layered continuity, and strong visual depth.

Generated by PAPP Framework

Dara Knot OSG | PAPP

For full functionality, we recommend downloading the Original format.The converted file is intended exclusively for browser preview. In the original file, the following are fully preserved:✔ original scene hierarchy✔ unsimplified materials✔ accurate texture maps✔ proper object namingIf you intend to use the asset in a production environment, choose the Original format.Women s Wedding Ring Celtic Passage

Gold Ring

Technically, this object is a one-stroke knot path materialized as a closed tubular mesh through the PAPP-OSG pipeline: discrete path construction, topologically verified, tube extrusion, and over/under weaving.
Generated, not hand-modeled: the Triquetra starts as a gate-constrained one-stroke path on a 28-grid trefoil domain, then becomes a Catmull–Rom ribbon and a 10-sided tube via parallel-transport framing and z-lift weaving. 
Result: 430+ controlled crossings in one watertight band.
It uses a trefoil / three-lobe Celtic domain arranged around 120° rotational balance, so the whole form reads as one continuous interlaced band rather than a flat emblem. 
In 3D, the classic triquetra becomes a compact woven sculpture with repeated crossings, rounded tubular volume, and a strong circular silhouette that preserves the symbolic threefold structure while giving it depth, weight, and architectural presence.

Generated by PAPP Framework.

Triquetra OSG |  PAPP

The 2026 edition of the Celtic explorer sees the model with an update to its appearance, and addition of life rafts.

Celtic Explorer 2026

There are a few files you will need to mirror.  Namely the Horns and the Wings.  You might also want to break apart the celtic knots and the dragons for ease of printing.  You can do all of this in MeshMixer for free. Edit 1:  Noticed the size was way off.  Scaled it down to a wearable size.  Separated out some files and mirrored the ones that needed it. Edit 2: Repaired the wings so they fit correctly.  Added a display stand so you can proudly display your helm when you are not using it. # Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 20% Notes:  You probably want to print the horns with 50% infill.  They can be a bit fragile.

Knight Helmet with Wings

Silver Celtic Ring

A Celtic standing stone with Celtic knot carvings. Low poly with PBR textures

Celtic Stone

A Celtic knotwork memorial tag for anyone honoring a beloved companion — designed for resin or FDM printing and finished as a hang-tag, pendant, or keepsake charm.

WHAT YOU GET
- STL and GLB files for a single oval tag, approximately 35–45 mm tall
- Front face features a raised continuous triquetra-style Celtic knotwork motif set within a clean recessed border frame
- Rear face carries a shallow debossed paw-print detail — understated and legible
- 3 mm bail hole at the top for cord, jump ring, or chain (not included)
- Minimum 2.5 mm wall thickness throughout; knot relief raised approximately 0.8–1.2 mm above the face
- A small central cartouche area on the front may be left flat for painted personalization or hand-stamped initials

PRINT SETTINGS
- Recommended layer height: 0.10 mm for fine knotwork detail
- Resin printing strongly recommended to capture interlace lines cleanly; FDM at 0.10 mm also supported
- Print flat on the front face — zero supports required
- No overhangs exceeding 45 degrees; water…

Celtic Triquetra Pet Memorial Tag STL |…

Silver Ring

Download this beautifully detailed Yggdrasil world tree STL file and print your own Norse mythology pendant jewelry. This ready-to-print 3D model combines organic botanical forms with geometric precision, perfect for resin casting, SLA printing, or FDM production.

**What's Included:**
- High-resolution STL file (optimized for all printer types)
- GLB preview file for 3D visualization
- Solid variant (ideal for resin/SLA)
- Hollowed variant (minimizes filament waste on FDM printers)
- Print-ready geometry with no support nightmares

**Design Specifications:**
45mm maximum height, <15mm shallow depth—sized to fit standard pendant bail hardware. The front-facing composition features an interlocking root-and-branch silhouette with organic symmetry, fine wood-grain line-work on the trunk and branches, and geometric Art Deco undercuts on the roots for visual richness. Subtle Norse rune and Celtic knotwork patterns trace the perimeter without breaking clean geometry. Minimum 0.8mm wall thickness throughout ensures…

Yggdrasil Pendant STL for 3D Printing – Norse…

This is a realistic 3D model of a Wilson Boston Celtics basketball ball. The ball was modelled and prepared for realistic style renderings background general cg visualization etc.

Wilson Boston Celtics Basketball

100Hex_Celtic_knot_03

100Hex_Celtic_knot_08

A realistic medieval battle axe featuring a worn iron blade and a detailed wooden handle. The metal surface includes scratches, edge damage, and weathering for an authentic used look. A Celtic knot engraving is carved into the axe head, adding a unique decorative touch.

Features:

High quality PBR textures

Detailed metal wear and roughness variation

Realistic wood grain and surface damage

Clean UVs and optimized topology

Textures included: Base Color, Roughness, Metallic, Normal (PBR)

Dining Table

A fully unwrapped low poly archway or stone arch. This arch model is in the style of Norman Celtic and is complete with realistic Celtic knot work.

Arch

A model of a stone throne seat with a ring of steps leading up to it. Perfect for celtic medieval and fantasy scenes. With PBR textures. Stone Throne Seat

Throne

100hex_Celtic_knot_12

100Hex_Celtic_knot_10

For full functionality, we recommend downloading the original file.The converted file is intended exclusively for browser preview. In the Original format, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ correct PBR texture maps✔ correct object namesIf you intend to use the asset in a production environment, select the original version.A model of a stone throne seat with a ring of steps leading up to it. Perfect for celtic medieval and fantasy scenes. With PBR textures

資源庫

關於這些資源