Recumbent 15th-century chamfered cross-slab grave-cover measuring 1.91m long by 0.09m thick, the slab measures 0.88m wide which tapers to 0.74m, in the centre of the chancel of Portumna Dominican Friary church (GA127-019----), Co. Galway. The floriated Latin Cross is framed within a floriated border.  The shaft of the cross rises from an animal/possible lion based on possible depiction of mane running around the face of the animal.  Described in the Urban Archaeological Survey of County Galway as 'a slab, bears a Latin cross in low relief. The cross shaft (Wth 0.19m) is decorated with a repeated floral motif and there is a knotwork circle near the crossing. Each arm consists of a square panel: that to the S bears a Greek cross which was formed by subdividing the square into four segments decorated with fleur-de-lis motifs. The panel to the N has one large rosette.  An inscription below the N arm reads ‘HERN(?)LI’.  For more details visit: https://tinyurl.com/4fcx6msj

Portumna Graveslab (GA127-019002-)

This is a one-stroke cross-shaped knot domain transformed into a closed tubular mesh with woven crossings and verified topology. 
Generated, not hand-modeled: the Celtic Cross starts as a gate-constrained one-stroke path on a 30-grid cross domain, then becomes a Catmull–Rom ribbon and a 10-sided tube via parallel-transport framing and z-lift weaving. 
Its unique mechanism is a ring inscribed into four arms, with knotwork continuously filling both the circle and the axial cross
The generator builds it as a circular ring inscribed in a four-arm cross, then fills both the ring and the arms with continuous knotwork so the form reads as one braided spatial system. 
In 3D, the Celtic Cross gains a strong ceremonial mass: the central ring stabilizes the object while the four arms extend as balanced directional axes, giving the piece the presence of a carved ritual sign translated into full volumetric topology.

Generated by PAPP Framework.

04_celtic_cross

A powerfully built Norse shield-maiden berserker caught mid-battle, dual war-axes raised and fury carved into every surface — designed for painters and collectors who want a characterful warrior figurine with strong tabletop silhouette and rich surface detail.

WHAT YOU GET
- STL and GLB files included in a single ZIP download
- Two scale variants: 75 mm heroic display and 32 mm tabletop-ready
- Sculpted in a stylized-heroic style with exaggerated proportions, chunky readable shapes, and organic form language — sitting between tabletop wargaming heroic-realism and Norse folk illustration
- Surface detail includes hammered-metal hatching on riveted iron plate pauldrons, carved knotwork on the round shield strapped to the forearm, layered fur-trim texturing on the billowing cloak, and braided hair with bone bead accents
- Waist and ankle cross-sections are thickened for FDM structural integrity; the cloak hem sweeps naturally to the feet to serve as self-stabilizing ground contact — no separate base or plinth …

Shield-Maiden Berserker Figurine STL | Norse…

This piece is a one-stroke symbolic knot converted into a watertight tube mesh, where a continuous path is lifted into 3D and woven with explicit crossing logic. 
Generated, not hand-modeled: the Ankh starts as a gate-constrained one-stroke path on a 30-grid symbolic domain, then becomes a Catmull–Rom ribbon and a 10-sided tube via parallel-transport framing and z-lift weaving. Its uniqueness is the phi-ratio crossbar fused to an oval loop and vertical stem in one continuous watertight band.
The Ankh domain combines an oval loop, a vertical stem, and a phi-ratio crossbar into a single spatial structure, keeping the ancient Egyptian silhouette readable while giving it the thickness and continuity of knotwork. 
The result feels halfway between emblem, pendant, and ceremonial object: an Egyptian cross of life rebuilt as a braided volumetric form instead of a flat sign.

Generated by PAPP Framework.

Ankh OSG | PAPP

A Celtic knotwork memorial tag for anyone honoring a beloved companion — designed for resin or FDM printing and finished as a hang-tag, pendant, or keepsake charm.

WHAT YOU GET
- STL and GLB files for a single oval tag, approximately 35–45 mm tall
- Front face features a raised continuous triquetra-style Celtic knotwork motif set within a clean recessed border frame
- Rear face carries a shallow debossed paw-print detail — understated and legible
- 3 mm bail hole at the top for cord, jump ring, or chain (not included)
- Minimum 2.5 mm wall thickness throughout; knot relief raised approximately 0.8–1.2 mm above the face
- A small central cartouche area on the front may be left flat for painted personalization or hand-stamped initials

PRINT SETTINGS
- Recommended layer height: 0.10 mm for fine knotwork detail
- Resin printing strongly recommended to capture interlace lines cleanly; FDM at 0.10 mm also supported
- Print flat on the front face — zero supports required
- No overhangs exceeding 45 degrees; water…

Celtic Triquetra Pet Memorial Tag STL |…

Download this beautifully detailed Yggdrasil world tree STL file and print your own Norse mythology pendant jewelry. This ready-to-print 3D model combines organic botanical forms with geometric precision, perfect for resin casting, SLA printing, or FDM production.

**What's Included:**
- High-resolution STL file (optimized for all printer types)
- GLB preview file for 3D visualization
- Solid variant (ideal for resin/SLA)
- Hollowed variant (minimizes filament waste on FDM printers)
- Print-ready geometry with no support nightmares

**Design Specifications:**
45mm maximum height, <15mm shallow depth—sized to fit standard pendant bail hardware. The front-facing composition features an interlocking root-and-branch silhouette with organic symmetry, fine wood-grain line-work on the trunk and branches, and geometric Art Deco undercuts on the roots for visual richness. Subtle Norse rune and Celtic knotwork patterns trace the perimeter without breaking clean geometry. Minimum 0.8mm wall thickness throughout ensures…

Yggdrasil Pendant STL for 3D Printing – Norse…

Attention!!! Note To get 4K textures you need to change MAX RESOLUTION to ORIGINAL in IMPORT SETTINGS of BlenderKit addon. press N key to open Sidebar . 3D model of a Victorian style bookcase from mahogany wood with decorative elements Scandinavian knotwork . The model consists of 28 774 faces. Textures created in Substance Painter 4K 3 materials wood brass glass .

Victorian Bookcase

Bring legendary Norse mythology to life with this gallery-quality Mjolnir pendant STL file—a 3D-printable hammer jewelry design that captures Thor's iconic weapon in wearable form. Download instantly and print in 24–48 hours; this is a complete, production-ready 3D model with pre-oriented files and built-in support guidance for your printer.

**What's Included:**
- Three scale variants: 30mm delicate pendant, 45mm everyday wearable, 60mm statement piece
- Pre-oriented STL and GLB files optimized for FDM (Bambu, Prusa, Creality) and resin casting
- Support placement recommendations and print-orientation diagrams
- Detailed Nordic knotwork and rune etching (0.8mm+ depth) for authentic fantasy-realistic detail
- Texturing design suggesting hammered metal finish, not smooth/cartoon

**Design Features:**
This Mjolnir balances geometric precision with organic craft appeal. The head features clean angular facets that respect both FDM tolerance and resin-casting constraints; the tapered handle flows into an integrat…

資源庫

關於這些資源