A Celtic knotwork memorial tag for anyone honoring a beloved companion — designed for resin or FDM printing and finished as a hang-tag, pendant, or keepsake charm. WHAT YOU GET - STL and GLB files for a single oval tag, approximately 35–45 mm tall - Front face features a raised continuous triquetra-style Celtic knotwork motif set within a clean recessed border frame - Rear face carries a shallow debossed paw-print detail — understated and legible - 3 mm bail hole at the top for cord, jump ring, or chain (not included) - Minimum 2.5 mm wall thickness throughout; knot relief raised approximately 0.8–1.2 mm above the face - A small central cartouche area on the front may be left flat for painted personalization or hand-stamped initials PRINT SETTINGS - Recommended layer height: 0.10 mm for fine knotwork detail - Resin printing strongly recommended to capture interlace lines cleanly; FDM at 0.10 mm also supported - Print flat on the front face — zero supports required - No overhangs exceeding 45 degrees; water…