This model is derived from the Egyptian Museum of Berlin's 3D scan of the *Bust of Nefertiti,* obtained by Cosmo Wenman after a three-year freedom of information effort directed at the Prussian Cultural Heritage Foundation. For more information about this project see this story: https://reason.com/2019/11/13/a-german-museum-tried-to-hide-this-stunning-3d-scan-of-an-iconic-egyptian-artifact-today-you-can-see-it-for-the-first-time/

The version on display here has been reduced in resolution for optimal online viewing. The complete data set is at [thingiverse.com/thing:3974391](https://www.thingiverse.com/thing:3974391)

Attribution info for the original scan:

Bust of Queen Nefertiti

3D-Model by Trigon Art, Berlin 2008

© 3D Model: Ägyptisches Museum und Papyrussammlung, Staatliche Museen zu Berlin – Preußischer Kulturbesitz

[CC BY-NC-SA](http://creativecommons.org/licenses/by-nc-sa/4.0/)

BUST OF NEFERTITI, FOIA Results

*A.k.a. When life gives you eggs...*

</br>

Created in Blender and Gimp.

The egg model is a simple elongated UV-sphere, cut in two through a boolean modifier using a subdivided plane, which vertices have been randomized.

The egg white was simulated with fluids physics, before being manually sculpted to correct artifacts and smoothen it. The yolk was added manually later.

All the shell textures are procedural, and were created with Cycles nodes baked to the exported model before actually "cracking" it open.

</br>

> This is the end
> 
> Beautiful friend
> 
> This is the end
> 
> My only friend
> 
> The end

**The Doors - The End**

</br>

S**t happens

The Swedish History Museum holds a large collection of bones of various kinds, including human remains. We living humans are both appalled by and attracted to visible evidence of death. The scanned human remains presented on Sketchfab from our museum are important museum artefacts, chosen because they represent a specific historical event. They also represent one of humanity’s worst acts: violence towards other humans. It is therefore our wish that you, as a viewer, use the 3D-models with respect. 

The image shows a human cranium with injuries on its left and front side. A small, square hole above the left eye and on the left cheek bone was probably caused by a pole weapon or a battle axe. The gash across the mouth could have been caused by a sword or a thin bladed axe.The cranium is one of several thousand artifacts found in a mass grave outside Visby on the island Gotland. All remains and objects found on the site stem from a battle between Gotlandic peasants and Danish mercenaries on 27 July 1361.

Cranium with injuries - 260727

Real-time model based on the artifact described in "The Call of Cthulhu" by H.P. Lovecraft.

Cthulhu Statuette

This collection contains several real-life artifacts, scanned at various locations around the world  (Museums or Temples) 

Optimized for game engines while keeping photorealistic visuall quality

Retopology and texture bake in Blender (2k, Diffuse only)


•	Statue of Ramses III Coronation (from Hathor Temple) – Egyptian Museum Cairo

•	Statue of Ramses II – Grand Egyptian Museum

•	Statue of King Khafre – Egyptian Museum Cairo

•	Statue of Ramses II – Louvre Museum

•	Statue of Khensu (moon god) – Egyptian Museum Cairo

•	Statue of Steward Au – The Metropolitan Museum of Art

•	Statue of Cleopatra – Rosicrucian Egyptian Museum

Ancient Egypt Pack

I made this scan from a quick photoshoot in old abandoned gas station. Exterior was full of wild grass.


Cleaning done to get rid of most artifacts. 
8k textures for viewer but 16k original textures packed in files.

Building scan No. 1

Urban & Industrial collections

Good for adding realism to your urban / abandoned scenes

diffuse/normal/specular

Building scan No. 1 - Interior

Almost final: just some unplanned problems.
UPD1: critical artifacts has been decided.

China HOUSE beta

Just a fire dragon

*the mesh has some artifacts in the animation because the use of bendybones that can't be exported  to sketchfab, if anyone wants to use it in a cormercial project contact me that i can solve this artifacts, and make others animation cycles.

Fire Dragon

Old Verison: https://sketchfab.com/models/16040588f0a643ec9b57cccd36280f9c

Dragon Balls (ドラゴンボール Doragon Bōru) are the namesake artifact of the Dragon Ball series. They are large, crystalline spheres (of varying sizes and colors) that feature five-pointed stars (ranging from one to seven, and also varying in sizes and colors, along with being either rigid or flat in appearance) inside of themselves (akin to glass art); individually, they have no powers, but united they have the ability to call forth their associated Eternal Dragon who can grant (usually) one wish(s).

I have a Patreon Join now! :https://www.patreon.com/user?u=14434838

The Dragon Balls

Sith holocrons were devices used by the Sith that were capable of containing information. Although their function was similar to that of Jedi holocrons, they usually were pyramids or tetrahedrons, whilst the Jedi holocrons were of cuboid shape, and were accessible only to those who were able to control the dark side of the Force. The Jedi Order considered these to be some of the most dangerous artifacts in the galaxy.

Info Link: http://starwars.wikia.com/wiki/Sith_holocron

I have a Patreon Join now! :https://www.patreon.com/user?u=14434838

Sith Holocron (Star Wars)

Coffin of the Pharaoh Akenaten in the Egyptian Museum, Cairo, Egypt.

This coffin was recovered from a tomb in the Valley of the Kings in what has been designated Tomb KV55.  The tomb was discovered by Edward R. Ayrton in 1907 while working for the wealthy American Theodore M. Davis.  The tomb has been controversial since it's discovery, originally being designated the burial of Queen Tiye.  It has now been shown through DNA analysis that the remains found in the tomb are those of Akenaten himself.  The DNA has further demonstrated that Akhenaten was the father of Tutankhamen (King Tut).
The face of the coffin and the name in the cartouche have been deliberately removed in an attempt to condemn the “heretic” pharaoh in the afterlife and erase his memory.

Information on the tomb can be found [here](https://en.wikipedia.org/wiki/KV55).  A scan of another artifact from the tomb can be seen [here](https://skfb.ly/6PoHS).

Created using 138 photographs (Canon EOS Rebel T5i) using Metashape 1.3.

Coffin of Akhenaten, Tomb KV55

An experiment in organic modeling and baking from a high-resolution mesh.

This was modelled based on a piece of artwork I found online that could probably be easily found again by searching demon skull on google, for practice.

This was one of my first attempts at baking details from a high-poly mesh into the textures of a low-poly one. It's still by no means low-poly, and if you plan to use it in any realtime applications I recommend optimizing it more.

The results of baking I think were alright except for a few artifacts that you can find if you look around for them. However, since this was only practice, I'm not too worried about it.

Feel free to use this model however you want, I never intend to use it for anything and it's just wasting space in my hard drive.

Model made in Blender 2.9, textures made in Substance Painter 2020.

Demon Skull

This [bench](https://samlingar.shm.se/object/2781868E-47C0-4503-8EB9-1E791045C055) from [Kungsåra Church](https://bit.ly/37RVQ6S) in Västmanland is probably Sweden's oldest complete furniture. It is on stylistic basis dated between 11th and 12th Century. Both construction and ornaments resemble 9th century artifacts in Norwegian finds from Gokstad and Oseberg. It is possible that the bench was originally part of a profane context and only much later ended up in Kungsåra Church.

![](https://bit.ly/3g97nDl)
Historical image of four ladies (Sigrid Leijonhufvud, Rosa Norström, Märta Leijonhufvud and Fanny von Haartman) trying out the the bench.
Photo: The Swedish National Heritage Board

The Kungsåra Bench

Please, note that this model is based on a physical replica of downtown Tikal in Museo Nacional de Arqueología y Etnología in Guatemala City. Any commercial use of the model will be subject to the same copyright restrictions as photographs of artifacts in the museum collection. 
ttps://mcd.gob.gt/tag/munae/
http://mcd.gob.gt/museo-nacional-de-arqueologia-y-etnologia/

Model of central Tikal, MUNAE, Guatemala

**Acheulean hand axe**

Location: Abbeville, France.

Period: Lower Paleolithic (before 300,000 years ago).

Material: flint.

Dimensions: length, 167.0 mm; width, 100.9 mm; thickness, 41.7 mm.

Notes: Catalog no. 518a2.  This specimen is part of a larger collection of artifacts that was acquired in 1929 by James Bell Bullitt during a tour of western Europe and later donated to the University of North Carolina.  Specimen resides in the North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Kathleen Brock.

Acheulean Hand Axe (518a2)

An old Fiat Strada which I made for the sketchfab lowpoly car challenge in May 2019.

https://sketchfab.com/blogs/community/sketchfab-low-poly-challenge-cars/


Programms used:

3ds max

Substance Painter


Edit:

-fixed smoothing group artifacts

-fixed deformed Fiat logo

Fiat Strada - #LowPolyCarChallenge

**Caption**

![](https://api.nakala.fr/data/10.34847/nkl.dcb556l7/00c3fe4397949017495a9461d80bf3a000b3310a) 

See uninterpreted vs. analysed surveys separately: https://skfb.ly/oUzKQ, https://skfb.ly/oUP77, & https://skfb.ly/oUQVo, vs. https://skfb.ly/oUPKr, https://skfb.ly/oUAUM & https://skfb.ly/oUQVs.

How to quote this model in a scientific paper?

Fr. Colin, “Middle Kingdom Artifacts dumped by Padiamenope's Workmen, Synthesis”, Maquette AS-2023-2Q-3, 2X-1 & 3D-4, Strasbourg, 2024, DOI: 10.34847/nkl.dcb556l7.

Specifying the model DOI is necessary to ensure its permanent quotation, regardless of its location. It is stored in a long-lasting way on the data service “Nakala” of the “TGIR Huma-Num” (https://www.nakala.fr).

**Bibliography**: [Colin 2024 (fig.1)](https://clae.hypotheses.org/4084).

Photogr. survey & modeling: Fr. Colin. Topo: Cassandre Hartenstein, Univ. Strasbourg UMR 7044 Archimède. Partners: Egyptian Ministry of Tourism and Antiquities, IFAO, Univ. Strasbourg, CNRS.

**CC BY-NC-ND licence**

Middle Kingdom Artifacts dumped by Padiamenope

Replica of an old submarine, scanned close to Pula in Croatia. 

It has some artifacts but from a distance it still should look good.

Beached Old Submarine PBR Scan

Images of art and artifacts from Guild Park & Gardens, 201 Guildwood Pkwy., Toronto.

With thanks to Friends of Guild Park.

Captured with S20+ 4k 60fps video. Processed in Reality Capture and Cleaned up in Medium, Modo, and Substance

Guild Park & Gardens - Wall Structure

**To view this asset in the best quality and to get rid of the opacity artifacts on the inside of the mesh add "*?image_compression=0*" to the end of the webadress. This is a compressionissue of sketchfab****

I did this holocron for a school related assessment. The goal was to create a "container" following the guiding principle "*contains secret knowledge*".

The requirement was to stay within the limit of 2500 Tris.

Tris: 2416
TextureRes: 1024x1024

Jedi Holocron

Futuristic plaza/canopy concept structure. Needs further cleanup of artifacts of some point lights

Futuristic Plaza

Farmhouse. Possibly formerly a summer house for the abbots of Burton. Early C16 carcass remodelled in the mid C17 and late C19. Timber framed on stone plinth with closely-spaced uprights (parts replaced by brick) with diagonal struts to gables. Brick and lath and plaster infill panels; brick and sandstone ashlar side stacks to the east; tiled roofs. Large U-shaped plan, open to the south (the main prospect) with later additions against the western limb. Probably formerly of hall and cross wings layout, entered through a screens passage to the western side, but substantially altered to take a central porch and upper storeys. 

Created in RealityScan by Epic Games from 303 images in 00h:19m:29s.

Sudbury Gasworks Digital Imaging is a collaborative team of individuals working together for the benefit of the wider community to help record historic artifacts.

Please feel free to download and use this model. All we ask if that you like, leave a comment and give credit to the author Shiro Morturn.

Thanks

Sinai Park House - Drone Mapping

Created in RealityScan by Epic Games from 130 images in 00h:26m:06s.

udbury Gasworks Digital Imaging is a collaborative team of individuals working together for the benefit of the wider community to help record historic artifacts. Our aims are to help people to take responsibility for the local buildings, artifacts, and landscapes they love. Giving them the power to transform people, places, and communities. Please feel free to download and use this model. All we ask if that you like, leave a comment and give credit to the author Shiro Morturn. Thanks

Colmans Mustard Tin - Cross Polarisation Scan

The Apollo Intensa Emozione: Void-Eater Edition is a structural paradox. It represents a "System Malfunction" in traditional automotive design, replacing clean lines with aggressive, insect-inspired organic geometry. This 780HP V12 monster is reimagined through a Black Institutional lens, transforming it from a hypercar into a predatory "Void-Tech" artifact.

The primary hull is draped in Obsidian Purple Carbon (#12001A), a finish that maintains a high-gloss 0.03 Roughness. This deep, crystalline purple acts as a "Dark-Matter" shell, absorbing light in the shadows while flashing a bruised, metallic violet under high-intensity LEDs. This is contrasted by the dry, 0.15 Roughness Satin Black used for the complex aerodynamic fins and the massive "Whale-Tail" rear wing, creating a tactile "Glitch" between different carbon weaves.

資源庫

關於這些資源