San Lorenzo Colossal Head 6 is one of the smaller examples of colossal heads, standing 1.67 metres. It measures 1.41 metres wide by 1.26 metres deep and is estimated to weigh between 8 and 10 tons. The head was discovered by a farmworker and was excavated in 1965 by Luis Aveleyra and Román Piña Chan. It is sculpted with a net-like head covering joined together with sculpted beads. A covering descends from under the headdress to cover the back half of the neck. The headband is divided into four strips and begins above the right ear, extending around the entire head. A short strap descends from either side of the head to the ear. The ear ornaments are complex and are larger at the front of the ear than at the back. The face is that of an ageing male with the forehead creased in a frown, wrinkles under the eyes, sagging cheeks and deep creases on either side of the nose.

http://www.mna.inah.gob.mx/index.php?option=com_sppagebuilder&view=page&id=4894

Olmec Head

Earl’s Hill Hillfort is an Iron Age enclosure 7 miles south west of Shrewsbury and immediately south east of the village of Pontesbury, Shropshire. The site consists of an earlier oval enclosure on the summit with a defended north gate and a later elongated annexe to the south extending along the top of the ridge. There is another defended enclosure approx. 400ft down through the woodland to the north known as Pontesford Hill Hillfort which is covered in trees.

Model created from drone photogrammetry using a DJI Phantom 4 Pro

You can read a detailed description of the hillfort here http://www.heritagegateway.org.uk/Gateway/Results_Single.aspx?uid=MSA763&resourceID=1015

There are links to two pdf archaeological reports on Earl’s Hill and Pontesford Hill here http://pontesfordhillfriends.co.uk/about-the-hill/pontesford-hill-and-earls-hill/archaeology-2/

The hill is also a Nature Reserve maintained by the Shropshire Wildlife Trust https://www.shropshirewildlifetrust.org.uk/reserves/earls-hill

Earl's Hill Hillort, Pontesbury, Shropshire

Repositorio de modelos 3D de Ddiaz Design

![](https://www.dubicars.com/images/4b0af6/w_1300x760/swaidan-motors/05c01f6b-4d2a-4726-87f2-ec18836251ba.JPG)

Infiniti is now extending its Q70 family with the introduction of a long wheelbase variant, as well as the regular version, to the US and other markets. The additional 5.9 inches in the wheelbase not only increases the knee and leg space in the back but also greatly augments the athletic presence of the sedan.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a Infiniti 3d model

Credits: https://3dwarehouse.sketchup.com/user/u2e1cd68e-d595-4d99-9454-7258360a0f19/NURIEZARCH

2020 Infiniti Q70 Luxury 3.7

The 1961 French Grand Prix (47th Grand Prix of the A.C.F.), held at the Reims circuit on July 2, 1961, was the ninety-eighth race of the Formula One World Championship held since 1950 and the fourth round of the 1961 championship. Virtually as fast as Spa-Francorchamps, the Gueux circuit was used only once a year, in early July, for a meeting that included, in addition to the Formula One Grand Prix, an international Formula Junior cup, named the Jean Behra Challenge in homage to the French champion who had passed away two years earlier. Extending over eight kilometers, the track included two long straights, allowing top speeds of nearly 300 km/h for the earlier F1 cars, whose power approached three hundred horsepower.

Here's the commemorative stamp in 3D for fun!

RF085-3D

Bottom Sword Tail Guppy Male. In the wild, these fish are typically olive green, but captive breeding has introduced a variety of vibrant colors.
The Double Swordtail Guppy, like other guppies, gets its name from its tail shape, with the top and/or bottom extending into sword-like points. Ofcourse there is also a top sword tail guppy

Bottom Sword Tail Guppy Male

A full-length khaki-brown leather coat is centered in the frame against a neutral gray background. The coat features a large, fluffy, taupe Mongolian fur collar and cuffs. A matching leather belt cinches the waist, with a rectangular buckle. The coat is buttoned up, with visible buttons down the front. The sleeves are long, with the fur cuffs extending past the wrists. Game ready.

![](https://user.uploads.dev/file/fe18ea437c2f7900fff30b5c7ebab58f.webp)

Khaki Brown Leather Coat with Taupe Fur Trim

Female Paradise Parrot (Psephotellus pulcherrimus) presented by Thomas Steel (1858-1925), Sydney, Australia, September 1892.
 
 
The paradise parrot is an extinct species of colourful medium-sized parrot native to the grassy woodlands extending across the Queensland and New South Wales border area of eastern Australia. Once moderately common within its fairly restricted range, it became extinct in 1927.

Paradise Parrot (Extinct)

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-13817](https://www.online.landessammlungen-noe.at/objects/1259441)

**Material:** Iron, Copper

**Dimensions:** 

**Dating:** 

The artefact is composed of an iron disc that has been covered with a gold-plated copper plate, which features a concentric decorative scheme. The central area is characterised by the presence of a circular protrusion. Four sets of motifs can be discerned emanating from the object's centre and extending to its periphery. The sequence of elements from the central point towards the periphery is as follows: firstly, a band of waves, radiating flame-like rays, and subsequently, a bar with floral decoration. A band of waves is once again evident at the periphery.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Phalera

Located in Strade Dominican friary (MA070-067001-), one of a group of five floriated graveslabs standing upright attached to the internal face of the south wall of the friary chancel. Tapered graveslab with floriated cross measuring 1.19m long by 0.39m wide that served as the lid of a medieval stone coffin/sarcophagus.  The surface of the slab is worn, but the outline of a long cross fleury carved in low relief extending almost the full length of the slab is visible.   Greek crosses rise from the terminals of the diagonal arms which represent the Crucifix and may represent a version of the Lily Crucifix.  Wavy diagional line near cross base has flowering terminals topped with a Greek cross.  Carving is best viewed in Matcap render. Flowering cross based on the Tree of Life.  In Christian theology, the crucifixion of Jesus transforms the cross from a "tree of death" into a new "Tree of Life," reversing the fall of humanity in Eden.  Archaeological Survey of Ireland description at; https://tinyurl.com/yyy65tpx

Strade Abbey Graveslab MA070-067009-

Lighthouse Mini is a refined table lamp designed to
enhance bedroom environments, extending beyond
the conventional role of a bedside lamp. It elegantly
integrates onto shelves, desks, or sideboards in
living areas and studies, delivering evocative and
customizable illumination.
The silhouette, inspired by the human form, evokes the
image of a figure engaged in reading, transforming light
into a subtle, narrative element. Its ability to adopt three
distinct positions ensures consistently unique lighting,
ideal for creating varied and personalized atmospheres.
Crafted from a painted aluminium cylinder illuminated
on two sides and supported by a cone with a solid
oval base in solid wood, Lighthouse Mini blends
contemporary aesthetics with premium materials for
functional, distinctive furnishings.

Lighthouse Mini_Second-Studio,designer I.Iacono

**Bird’s Foot Delta — Mississippi River**

This model represents the Bird’s Foot Delta of the Mississippi River in southeastern Louisiana, USA. The delta is characterized by long, narrow distributary channels extending into the Gulf of Mexico, forming a shape that resembles a bird’s foot. The landscape forms as river sediments are transported downstream and deposited where the river meets the ocean, gradually building new land over time.

The terrain model was generated from a 1-meter resolution Digital Elevation Model (DEM) obtained from the United States Geological Survey (USGS) 3D Elevation Program (3DEP) and distributed by OpenTopography.

**Data Source:**
United States Geological Survey (2021). United States Geological Survey 3D Elevation Program 1 meter Digital Elevation Model. Distributed by OpenTopography. https://doi.org/10.5069/G9NP22NT
. Accessed 2026-03-04.

Bird Foot Delta

Anthropomorphic whistle representing a seated woman with long hair, which she styles into a braid that appears to be wrapped with a ribbon extending over her legs. She wears ear ornaments and a beaded necklace. Although her bust is exposed, she is covered by a mantle whose edge is decorated in a net-like pattern with interlaced fringes. From Alta Verapaz region of the Guatemalan Highlands.

 IDAEH Cultural Property No. 16.2.5.0285
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Whistle figurine

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-3272](https://www.online.landessammlungen-noe.at/objects/260154)

**Material:** Lead

**Dimensions:** 42 x 34 mm

**Dating:** 800-975 CE

Equal-armed cross made of lead with a small mounting eyelet. The edges of the cross beams are accompanied by a groove. In the centre of the cross, partially extending into the beams, is a depiction of Christ. The arms are stretched out horizontally, while the face is simple in design. The folds of the clothing are merely hinted at in a grid-like pattern. The feet are not depicted, while the hands are accentuated with a few strokes.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Lead Cross

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-20425/5](https://www.online.landessammlungen-noe.at/objects/1518743)

**Material:** Ceramic

**Dimensions:** 14,09 x 8,2 cm

**Dating:** 150 - 250

A bowl with a flared rim. The vessel is reduction-fired and the clay exhibits a greyish-brown pigmentation. A central bulge is present on the base. The vessel is adorned with fluted decoration extending from the shoulder to the bulge.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Bowl

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-19868.5481.0](https://www.online.landessammlungen-noe.at/objects/98007)

**Material:** Ceramic

**Dimensions:** 4,9x3,4cm

**Dating:** 4500-4301 BCE

The head of the goat figure is fully sculpted. It is most likely a vessel decoration. The clay has medium fineness. The object is painted over its entire surface in red. On the left side of the neck, two stripes can be seen in yellow and white, extending along the neck. The mouth and nostrils are clearly visible. The ears stick out to the sides, and the horns are depicted as vertical cones. The piece has a knotty thickening below each ear.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Goat head applique

A full-length olive-green leather coat is centered in the frame against a neutral gray background. The coat features a large, fluffy, lime Mongolian fur collar and cuffs. A matching leather belt cinches the waist, with a rectangular buckle. The coat is buttoned up, with visible buttons down the front. The sleeves are long, with the fur cuffs extending past the wrists. Game ready.

![](https://user.uploads.dev/file/4776a2095a00612ea24ed5dbad5cfaf4.webp)

Olive Green Leather Coat with Lime Fur Trim

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-19020.277](https://www.online.landessammlungen-noe.at/objects/1375049)

**Material:** Lead

**Dimensions:** 3,54 x 3,64 cm

**Dating:** 800 - 975 CE

An isosceles cross made of lead, with a small hanging loop on one of the side arms. The edges of the cross beams are accompanied by a groove. In the centre of the cross, partially extending into the beams, is a depiction of Christ. 

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

A powerful stylized Black Demon Warrior designed for 3D printing. This dark fantasy creature features long, curved horns extending to the sides, exaggerated sharp fangs, and a strong, muscular body that conveys raw infernal strength.  The demon’s design emphasizes an intimidating silhouette, with a dynamic tail ending in a blade-like shape, adding both balance and visual impact. Every detail is crafted to enhance the character’s presence, making it perfect for collectors, painters, and tabletop enthusiasts.  The model is optimized for resin 3D printing and comes in two versions: pre-supported for easy printing and unsupported for users who prefer custom scaling and support settings.  Ideal as a display piece, dark fantasy collectible, or tabletop character.  STL file (unsupported version)

Black Demon Warrior Stylized Dark Creature STL 3D print model

Jenson Extending Dining Table, Dark Stain Oak

An unsettling amorphous creature made of constantly shifting black-green slime. The viscous body bubbles and reshapes itself, forming tentacles and pseudolimbs that allow it to sqerwise it remains a fluid, almost formless mass. Its glossy surface reflects light like liquid obsidian, giving it a sinister and alien presence. Instead of feeueeze through tight gaps and morph at will. Jagged mouths and scattered eyes appear only when the creature hunts, otht, semi-solid pseudolimbs form as it moves, hardening into temporary plates for traction or extending like springs for powerful jumps. Perfect for horror, sci-fi, or dark fantasy scenes.

Amorphous Black Green Slime

Belgrave Extending Dining Table, Dark Oak

Betty Extending Dining Table, White

# **American Center of Research Museum**
# Description:
> Ceramic earthenware pitcher/bottle from North Ridge, Petra. Pitcher with a pinched mouth, a strap handle extending from the rim to the shoulder, and a rounded base. Height 13.5 cm, circumference 43.5 cm, weight 275 g. Assembled complete shape with a restored part.

**Methodology:** Scanned by GDH in October2025 using Canon R5. Processed in RealityCapture.

**Acknowledgment:** This project was a collaboration between the** GDH,** and **ACOR**

資源庫

關於這些資源