The 8.0-litre W16-cylinder engine with 1,850 PS and 1,850 Nm of torque is at its heart. Bugatti has designed the drive specifically for use on the race track, and has optimized it in particular for higher engine speeds. For a start, both intake and exhausts systems were de-throttled to obtain a more spontaneous response, while four newly developed turbochargers build up more boost pressure and power at higher engine speeds. In order to cope with the extremely high centrifugal forces the whole dry sump lubrication system was redesigned, bringing also weight saving benefits. The cooling system is new as well, from the air-to-air intercooling for the engine (instead of water-to-air), to the carbon-titanium turbofan radial compressors to ventilate and cool the high-performance racing brake system.

[https://www.bugatti.com/models/bolide/](http://)

Bugatti Bolide 2024

For the homologation road car, see BMW M3 GTR (E46)
For the road car, see BMW M3 (E46)
The 2001 BMW M3 GTR GT (E46) is a race car developed by BMW based on their M3 E46.

The M3 GTR GT appears on the box art of Need for Speed: Most Wanted.
In all of the its appearances in the Need for Speed series, the M3 GTR GT is fitted with a racing body kit only used in various 2001 racing series, and is likely an oversight from the hero car design's numerous iterations from a road car with a racing body kit[8][9] into a race car.[10]
It features LED rear lights that were not introduced to the E46 model range until April 2003.
It is missing an air intake and tow hook in place of the washer jet cover below the passenger side headlight.
It is missing its wing mirror air vents.
Portrayed in the box art, it is fitted with ADR M Sport wheels, instead of BBS Motorsport RE594 / RE595 wheels.

2001 | BMW M3 GTR (E46) | NFSMW

**A LEGENDARY MARANELLO MASTERPIECE – FERRARI 288 GTO.**
-

This model embodies the raw aggression and elegance of Ferrari’s 1984 icon, originally built for Group B racing. The low-slung profile, sharp lines, and signature twin round taillights are replicated with obsessive detail. From the sculpted fenders to the deep intakes, every curve channels aerodynamic intent and Italian engineering excellence.

---

**THIS 3D MODEL IS FREE! 🔥**
-

The only condition: no commercial use. For commercial licensing, please contact the manager (@MR.Q) via our Discord server.

---

**INSTAGRAM LINK (FOLLOW US!):**
-

https://www.instagram.com/outlaw_gameshq/

**DISCORD SERVER LINK:**
-

https://discord.gg/xy9KdxbZge

---

**Credits:** Nieve5677

Ferrari 288 GTO

**ITALIAN OPEN-TOP AGGRESSION – 2009 LAMBORGHINI GALLARDO LP560-4 SPYDER.**
-
This model delivers the unmistakable edge of Lamborghini design—refined in the LP560-4 Spyder. With razor-sharp lines, signature Y-shaped lighting, and a fully detailed convertible top, this Gallardo balances brutal performance with precision styling. Every vent, intake, and body panel is modeled with meticulous realism.

---

**THIS 3D MODEL IS FREE! 🔥**
-

The only condition: no commercial use. For commercial licensing, please contact the manager (@MR.Q) via our Discord server.

---

**INSTAGRAM LINK (FOLLOW US!):**
-

https://www.instagram.com/outlaw_gameshq/

**DISCORD SERVER LINK:**
-

https://discord.gg/xy9KdxbZge

---

**Credits:** Ddiaz Design.

2009 Lamborghini Gallardo LP560-4 Spyder

The 2026 Mini Cooper HH proudly upholds the British brand's sporting heritage in a market rapidly shifting towards electrification. This petrol-powered version of the John Cooper Works perpetuates the "go-kart feeling" that has made Mini famous, offering a powerful alternative to the newly launched electric models.
Matte black grille in American colors
Enlarged air intakes optimizing engine cooling and aerodynamics
"American" bonnet stripes
Horizontal LED headlights with a modern light signature
Dual exhaust outlets integrated into the rear bumper
Traditional bonnet scoop. Exclusive 17- and 18-inch wheels complete the sporty look of this British city car.
Powertrains and performance of the 2026 Mini JCW-HH
To celebrate, Mini Cooper is offering a revolutionary coffee machine as a gift to buyers of the vehicle—a nice touch.
Downloadable 3D models fictional and humorous  are available here in lowpoly Sketchfab format:

Cooper Team Optim80P100

Shout out to RedneckRacing 674 *1fastscooter* for the engine he's a super cool guy yall should check him out on tinkercad. All I did was put a better transmision on, he has two diffrent variants, one with a smaller supercharger intake and then one with a bigger one I chose the bigger oe for all of my models that have this in them. By the way spoiler alert there will be a certain green and black car that will come out very soon!

Eliminator Supercharged Ls Based V8 Engine

A high-resolution 3D model of a bladeless fan, inspired by modern consumer product design. This piece focuses on clean geometry, smooth surface transitions, and a minimal aesthetic.

The model is built with attention to detail, including the airflow loop, perforated intake section, and power cable, while maintaining an efficient and optimized structure suitable for real-time viewing.

Materials are tweaked to balance realism and clarity, ensuring the form reads well under different lighting conditions in interactive environments.

Created in Blender as part of a product visualization study.

Bladeless Dyson Fan – Clean Product Model

A recreation of the Federal Signal 500 siren which comes in many configurations with this model being 8/12 port and sourcing my chopper from my model 2.

The other version I built has the cone like intake and a bigger chopper. This siren was produced in the late 1950s and sported a 8/12, 9/12,         8 - 12(DHTT), 8, 12 and 10/12 port configurations with there also being a dual horn two tone (DHTT), single horn two tone (SHTT) or single horn (SH) and they later were renamed BT, AT, A. 

This is a recreation of the non-cone intake federal 500 siren.

Federal Signal 500AT/SHTT

Intake

You guys can comment banana if you like this or type apple if you dont like it.

Intake Manifold

Drosera capensis, the Cape sundew, is a perennial rosette-forming carnivorous herb in the flowering plant family Droseraceae. It is native to the Cape region of South Africa, where it grows in permanently wet, nutrient-poor habitats. Leaves are covered in stalked glands that secrete sticky mucilage. These attract, trap, and digest arthropod prey, obtaining nutrients that supplement intake from the substrate in which the plant grows. The plant is an autotroph that produces its own food in the green leaves by photosynthesis. The nutrients (like minerals N, P, Na, Ca etc)  absorbed from insects are not  plant food but essential miconutrients are used in the production of amino acids, necleotides  which are required for growth.

Sun Dew - Drosera Capensis

Air Box

Inline 4 cylinder made fully from scratch piece by piece (carburetor, intake and exhaust, oil filter, crankshaft pulley, water pump and pulley, oil pan, engine block, engine head, camshaft cover, air filter)

Inline 4 Cylinder Carbureted

New fighters family. Based on cranked-arrow double delta wing from F-16XL with addition of PChN or active LERX from Su-57.
Air intake is inspired by F-16DSI, Boeing X-32 and Sukhoi Su-75.
Flat nozzle is taken from Su-57 prototype.
Family consists of unmanned loyal wingman drone, singleseater and twoseater variants. And naval versions of all three.

* Length: 16.5 m
* Wingspan: 10.9 m
* Height: 3.64 m
* Empty weight: 10 t
* Weapon bays: 1 big + 2 fast
* External hardpoints: 6

E-53B

Mostly FDM print.  Needed to do new intakes in resin as supports cocked up the FDM ones.  Mostly completed here.

3D Print of Leopard, near complete.

For complete workflow compatibility, we recommend downloading the Original format.The viewer version is intended only for use in the web viewer. In the Original format, the following are fully preserved:✔ original scene hierarchy✔ all materials without simplification✔ accurate texture maps✔ original object namesIf you intend to use the asset in a production environment, download the original version.Common fire hydrant used by firefighters as a water intake to extinguish fires.

Red Firehydrant

This project represents a modern cylindrical air purifier designed for contemporary living spaces.
The minimal and timeless design language highlights a perforated metal body for efficient air intake, while the fabric-covered upper section softly defines the clean air outlet.

The model focuses on realistic proportions and subtle detailing, making it suitable for product visualization, interior scenes, and concept design projects.
Rendered in a modern interior environment with natural lighting, the scene emphasizes how the air purifier integrates seamlessly into everyday living spaces.

(Not suitable for games; contains excessive poly. Suitable for architectural use.)

![](https://i.imgur.com/X75NaZq.jpeg)
![](https://i.imgur.com/YBhTSgn.jpeg)
![](https://i.imgur.com/x4vhNcF.jpeg)

Air Cleaner

A bold, compact concept coupe that mixes retro proportions with futuristic detailing. The CL1M06 features clean geometric surfaces, a wide hexagonal grille, and layered chevron LED signatures that give the front a distinctive, friendly face. A sunflower yellow body contrasted with a deep crimson roof and glossy black panoramic glass creates a playful yet purposeful color block. Sculpted side intakes, pronounced rear haunches and twin-exhaust detailing emphasize a sporty character, while the red multi-spoke wheels add a high-contrast, premium touch.

The design balances approachable charm with performance cues, making it suited to marketing visuals, concept competitions, or further refinement into a production-direction study.

Important: the model is not guaranteed to be printable straight away — it contains thin panels, separate parts, and non-watertight geometry typical of hard-surface render assets

資源庫

關於這些資源