CC206 (GE-CM20EMP) is a diesel-electric locomotives are owned by PT. KAI (Indonesian Railways Co.).

CC 206 (GE-CM20EMP locomotive) - PT. KAI

The British Rail Class 08 is a diesel-electric shunting locomotive. Nicknamed "Gronk" by rail enthusiasts, the shunter first saw use in 1952 and quickly became a common sight in rail yards across britain. In fact a total of 996 were produced, making it the most common locomotive to ever run on British railways, with 100 still being used in operation to this day, with another 70 preserved at heritage railways.


I attempted to make an interior for a change, I think it turned out quite well, even though it's mostly just there so it doesn't look empty when the light hits it right, which was a problem with my other locomotives.

Hope you like it, and let me know what you think!

British Rail Class 08

This is a locomotive from the 40's designed to carry heavy haul above hills and in terrain usual other locomotives can't move fast enough.

Steam Locomotive 'Union Pacific BigBoy'

Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

The CFL Class 3600 was an electric licomorive operated by Chemins de Fer Luxembourgeois from 1958 to 2005. The locomotives are based on the French BB-12000.

A quick note regarding the accuracy of this model: I always strive to achieve as much realism as possible in my models. However, they are not fully authentic; they are merely "visually" realistic. I mention this especially with this model because it lacks several important details. It was made for a separate project of mine, as such, the back of the model, especially the underside, is quite lacking. Nonetheless, I still think it turned out quite well, therefore, I am still sharing it. Hope you like it!

Also for whatever reason the SD version of this model is super blurry. Just change it to HD, and it should look fine.

CFL Class 3600

**Trivia:**
The Queensland Railways 1200 Class is a diesel-electric locomotive built by English Electric in Bradford in the 1950s. Designed for mainline passenger and freight duties, these locomotives were notably used on the iconic Sunlander service between Brisbane and Cairns, a journey of approximately 1,681 km along Queensland’s North Coast Line.

# If you like this model please consider supporting me! https://buymeacoffee.com/jotrain

Created as a Transport Fever 2 mod:
![](https://images.steamusercontent.com/ugc/12893268340163506352/A62354A740526F48088A081BF2F6B971EDF753B5//)
https://steamcommunity.com/sharedfiles/filedetails/?id=3688286626

**To give proper credit, include the following in your credits section:**

    Model: https://sketchfab.com/3d-models/9bdb132fda7e4fc7bf3b9fc4cb9ff076
    Created by Joshua G (Jotrain) – www.jotrain.com.au

資源庫

關於這些資源