Free 4K model of an old tyre with worn tread, scuffs, dirt and realistic rubber sidewall detail, stamped markings and gritty, abandoned-junkyard character.

Old Tyre

Free 8K model of a weathered wooden-handled garden trowel with a rusted, scratched steel blade, realistic dirt and patina, and stamped handle detail.

Trowel 01

Free 4K model of a weathered American football with detailed pebbled leather, aged laces, stamped branding, and realistic scuffs.

American Football

8th century, Poland
Wawel Royal Castle – National Art Collection

A Hussar szyszak was a type of helmet commonly used by the troops of the Polish Hussars, similar to the pappenheimers used in Western Europe. Usually, it was decorated similarly to the Hussar armour – with trimmings and appliqué motifs of brass stamped with geometrical ornaments. There were a few variants of this helmet: with a tip on the top, a high crest, or fan-like wings on the skull (the latter was popular in the 1st half of the 18th century, during the Saxon’s reign).

For more images and further information, visit: https://muzea.malopolska.pl/en/objects-list/1253
Localisation of the physical object: Wawel Royal Castle – National Art Collection

Digitalisation: Regional Digitalisation Lab, Małopolska Institute of Culture in Kraków, Poland; “Virtual Museums of Małopolska” Project

Project Visualization (3D model + textures): Marcin Solarz

Hussar helmet

Golds Spooky Terror Face Stampede

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-2373](https://www.online.landessammlungen-noe.at/objects/1029450)

**Material:** Bronze

**Dimensions:**  63,3 x 6,89 cm, 28,4 mm

**Dating:** 1050-801 BCE

A bronze sword with an oval handle, decorated with three wide, circumferential strips adorned with diagonal lines. The lower end of the handle is flared and has an angular notch in the middle. The blade exhibits a slight indentation and is gently curved. The central region of the specimen is characterised by a flat ridge, flanked on either side by two narrow, low strips. The latter are distinguished by the presence of diagonal hatching towards the upper end. Concentric circle ornaments are stamped onto the upper end of the blade, where the edges are indented. The antennae exhibit a wide, ribbon-shaped and simply rolled structure.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Antenna Sword

For the Emperor. No mercy. No retreat.

A massive, battle-worn grimdark boltgun sidearm —
thick red enamel hull scarred by countless engagements,
imperial eagle emblem stamped into the receiver,
riveted steel plates, skull iconography,
and a grip worn smooth by an iron gauntlet.

This weapon doesn't just fire. It judges.

Perfect for :
- Grimdark / sci-fi military game weapon props
- Space marine or imperial faction character loadout
- Cinematic hero weapon or display prop
- Hard surface weapon design reference

Fan-made asset inspired by grimdark sci-fi aesthetics.
Created with Meshy AI.
Follow for more sci-fi weapons and military props.

---

자비 없음. 후퇴 없음.

두꺼운 붉은 에나멜 외장, 수신부에 각인된 독수리 문장,
리벳 철판, 해골 아이코노그래피,
그리고 철갑 장갑에 닳아버린 그립.

수많은 전장을 누빈 흔적이 고스란히 남은
묵직한 그림다크 볼트건 사이드암입니다.

이 무기는 그냥 쏘지 않습니다. 심판합니다.

그림다크 SF 미학에서 영감을 받은 팬메이드 에셋입니다.
Meshy AI로 제작되었습니다.
더 많은 SF 무기와 밀리터리 프롭을 원하신다면 팔로우 해주세요.

Grimdark Boltgun - Heavy Sci-Fi Pistol Weapon

A Rhodian stamped amphora handle found at Beit Jabrin, Palestine, dating to c 150-100 BC.

This handle depicts the head of Helios, the sun god, in a circle surrounded by the name of the eponym and the month of office: EIII ANΔPON[IKON] [AΓP]IANOY (In the term of Andron[icos], in the month of [Agr]ianos’).

A secondary stamp on the side of the handle in the form of a small square containing the letter A.

Photos were taken with a Nikon Z5 with a 24-50mm lens. The model was constructed on Reality Scan using 157 images. Captured January 2026.

Stamped Amphora Handle (C1965-38-73)

EN:
Clean, optimized low-poly 5-lug wheel built for real-time and game use. Only 726 triangles — perfect balance of quality and performance, even for mobile games. Classic stamped steel rim with detailed tire makes it versatile for many vehicle types. Lightweight, efficient, and ready to use in any project — smooth rendering without losing visual appeal. Perfect for racing, simulators, and more.
RU:
Чистая и оптимизированная low-poly модель колеса на 5 гаек для игр и real-time проектов. Всего 726 треугольников — отличный баланс качества и производительности, подходит даже для мобильных игр. Классический штампованный диск с детализированной резиной делает модель универсальной. Лёгкая, эффективная и готовая к использованию — стабильный FPS без потери качества.

Wheel

The MAC-10 (Military Armament Corporation Model 10) is one of the most recognizable firearms in modern history, known for its boxy shape, high rate of fire, and frequent appearances in action movies and video games.
Developed by American designer Gordon Ingram in 1964, it was intended to be a compact, reliable "handheld machine gun" for special forces and paratroopers.
Key Characteristics
The MAC-10 is defined by its simplicity and raw power. Here is a breakdown of what makes it unique:
Compact Design: It is incredibly small for a submachine gun, built primarily from stamped steel. This made it easy to conceal and deploy in tight spaces.
The "Room Sweeper": It has an incredibly high rate of fire—roughly 1,000 to 1,250 rounds per minute. Because of its light weight and lack of a traditional stock, it is notoriously difficult to control during full-auto fire.
Caliber Options: It was originally chambered in .45 ACP

MAC-10

historical Stamped

A Celtic knotwork memorial tag for anyone honoring a beloved companion — designed for resin or FDM printing and finished as a hang-tag, pendant, or keepsake charm.

WHAT YOU GET
- STL and GLB files for a single oval tag, approximately 35–45 mm tall
- Front face features a raised continuous triquetra-style Celtic knotwork motif set within a clean recessed border frame
- Rear face carries a shallow debossed paw-print detail — understated and legible
- 3 mm bail hole at the top for cord, jump ring, or chain (not included)
- Minimum 2.5 mm wall thickness throughout; knot relief raised approximately 0.8–1.2 mm above the face
- A small central cartouche area on the front may be left flat for painted personalization or hand-stamped initials

PRINT SETTINGS
- Recommended layer height: 0.10 mm for fine knotwork detail
- Resin printing strongly recommended to capture interlace lines cleanly; FDM at 0.10 mm also supported
- Print flat on the front face — zero supports required
- No overhangs exceeding 45 degrees; water…

Celtic Triquetra Pet Memorial Tag STL |…

For full functionality, we recommend downloading the source format.The viewer version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ proper texture maps✔ original object namesIf you intend to use the asset in a production environment, download the source file.A small pile of early 1900s Stamped Envelopes containing letters or correspondence. Generic enough to be used for business or home scenes. In part based on genuine late 1800s and early 1900s public domain envelope images found in the Library of Congress online collection.

Early 1900s Office Mail Envelope Stack

This highly detailed 3D model presents a classic vintage metal filing cabinet an essential piece of furniture for retro offices police precincts and industrial workspaces. Constructed from heavy gauge stamped steel the cabinet features a battered and heavily weathered industrial aesthetic. The PBR textures are meticulously crafted to show layers of history chipped grey or olive drab enamel paint deep scratches around the drawer handles and significant rust accumulation along the bottom edges where it has been exposed to damp concrete floors. Each of the spacious drawers is equipped with tarnished chrome or brass label holders and heavy duty pull handles complete with subtle dents and impact marks from decades of rough use. This atmospheric prop is incredibly versatile making it a must have asset for environment artists designing a 1950s noir detective agency a Cold War military bunker an abandoned asylum or a post apocalyptic administrative building. It is fully optimized for real time

Vintage Metal Filing Cabinet

EN: Clean, optimized low-poly 5-lug wheel built for real-time and game use— perfect balance of quality and performance, even for mobile games. Classic stamped steel rim with detailed tire makes it versatile for many vehicle types. Lightweight, efficient, and ready to use in any project — smooth rendering without losing visual appeal. Perfect for racing, simulators, and more. RU: Чистая и оптимизированная low-poly модель колеса на 5 гаек для игр и real-time проектов. — отличный баланс качества и производительности, подходит даже для мобильных игр. Классический штампованный диск с детализированной резиной делает модель универсальной. Лёгкая, эффективная и готовая к использованию — стабильный FPS без потери качества.

Lowpoly_ Wheel

A Rhodian stamped amphora handle Found at Beit Jabrin in Palestine. 

This handle reads: ΔΑΜ ..../ΤΙΜΟΓΕΝ ('Dam...., son of Timogenes'), giving the name of the manufacturer.

Photos were taken with a Nikon Z5 with a 24-50mm lens. The model was constructed on Reality Scan using 144 images. Captured September 2025.

Amphora Handle (C1965.38.128)

Vintage-inspired lantern creates a seamless, warm ambiance whether you're camping in the wild or entertaining in the backyard and beyond. Functionality meets classic design with simple on/off push button which also acts as a dimmer, rechargeable micro USB, and durable stamped steel exterior. Set the mood, and sink into your outdoor experience freed from distractions.

Drag and Drop and you are good to go. 4k Textures.

Check my profile for free models https://sketchfab.com/re1monsen If you enjoy my work please consider supporting me I have many affordable models in the shop. Smash that follow!

The original stump was scanned by /AlexandreGonzalezRivas and I baked it to another mesh.

Feel free to contact me. I’d love yo hear from you.

Thanks!

Woodsman Collection - Forest Lantern/Lamp

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [MA-506](https://www.online.landessammlungen-noe.at/objects/252308)

**Material:** Iron

**Dimensions:** Lock: 15,2 x 4,62 cm Key: 10,76 x 3,69 cm, 13,5 mm

**Dating:** 1501 - 1800 CE

Padlock with semicircular hinged shackle and a hollow pin key. The numeral "1684" was stamped on the shackle. The keyhole was secured by a preliminary lock, the opening of which required a specific trick: pressing a spring activated the preliminary lock, which sprang open to reveal the keyhole.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

資源庫

關於這些資源