This model was captured autonomously by Skydio 3D Scan. 3D Scan is a first-of-its-kind adaptive scanning software built on top of Skydio Autonomy. It allows the drone to automate data capture for generating 3D models with comprehensive coverage and ultra-high resolution, so that crews can perform higher quality scans in less time and with minimal pilot training.


**Capture**

* Platform: Skydio 2
* Date: Feb 16, 2020
* Distance: 10 ft
* GSD: 1.25 mm
* Overlap / Sidelap: 75% / 70% 
* Photos: 542
* Flight Time: 43 minutes (2x batteries)
* Structure Dimensions: 77ft by 24 ft by 10ft

**Processing**

* Package: Bentley ContextCapture

[View Photos](https://drive.google.com/drive/folders/1ZgR05UOZPflkVQL-p-zYgREqZnZDfzZ5?usp=sharing)

<img src="https://drive.google.com/uc?id=1veTsv7iuqrnyob1wTAy5H0GiWN3j8yIv"/>

Mock Helicopter Crash Scene

This is the Picture Gallery located on the top floor of the [Hallwyl Museum](http://hallwylskamuseet.se/en) in Stockholm, Sweden.

Countess Wilhelmina von Hallwyl was a keen collector of Dutch and Flemish artworks of the Golden Age.

 
The diversity of artists and motifs is representative of the Hallwyl House Collection of Dutch and Flemish masters. The collection constitutes a kind of encyclopedia of the [Golden Age of Dutch Art](https://en.wikipedia.org/wiki/Dutch_Golden_Age_painting).

"See For Yourself" was the catchphrase of the Golden Age. 

Let us take a closer look at some of the highlights! There is more than meets the eye!


Text: Annika Williams

Scan: Erik Lernestål

The images for this project were captured using a Panasonic Lumix GX8 camera with a 25 mm lens.

The Picture Gallery

***Homo sapiens*** 
  
Location: Cro-Magnon, Les Eyzies, Dordogne, France. 
  
Age: 27,700 years B.P. 
  
Material: plaster cast. 

Dimensions: length, 125 mm; width, 132 mm; height, 72 mm.
  
Notes: RLA catalog no. 1979rp16 (cast).  Male mandible.  Discovered in 1868 by Louis Lartet.  Cast made by the University Museum of the University of Pennsylvania.  From the teaching collection of the Research Laboratories of Archaeology, University of North Carolina at Chapel Hill.  Model by Aidan Paul.

Homo sapiens (Cro-Magnon I) Skull (1979rp16-2)

Monetary unit: penny. Denomination: 5. Year of issue: 1988. Material: brass. Edge: ribbed. Diameter: 25 mm. From the series of the last Soviet coins. In 1991, the Soviet Union ceased to exist.
Die letzte Münze der Sowjetunion (1991.5k). Währungseinheit: Penny. Stückelung: 5. Ausgabejahr: 1988. Material: Messing. Kante: gerippt. Durchmesser: 25 mm. Aus der Serie der letzten sowjetischen Münzen. 1991 hörte die Sowjetunion auf zu existieren.
Денежная единица: копейка. Номинал: 5. Год выпуска: 1988 год. Материал: латунь. Гурт: рубчатый. Диаметр: 25 мм.

The last coin of the Soviet Union (1991.5k)

Cutter for clay in the shape of concentric rectangles.  All my cutters have a knife edge design to get a clean cut and are therefore very strong.  Three sizes available: 25 mm,30 mm and 35 mm.  Dimensions are from the longer side, inner side.  The height is 10 mm and the cutting edge is 0.4 mm.  Print with "Detect Thin Walls": ON

CONCENTRIC RECTANGLES CLAY CUTTER

Let’s celebrate my debut on MyMiniFactory with… well, a little blacksmith! The miniature stands on a base of about 2 inches, although the blacksmith itself has been scaled to the standard 32 mm size so that it matches a typical 1-inch miniature. Naturally, the file comes pre-supported and is ready to print on your resin printer. With the proper supports, it can also be printed on an FDM printer, although I recommend a 0.25 mm nozzle and a layer height of around 0.08 mm. As always, I’m available to answer any questions you may have about our products. Happy printing from the Velis Family!

My Mini Blacksmith (free)

Clay cutters in the shape of a circle Sizes: 15 mm, 20 mm, 25 mm, 30 mm and 40 mm All my cutters have a knife edge design to get a clean cut and are therefore very strong. Dimensions are taken from the longer, inner side. The height is 10 mm and the cutting edge is 0.4 mm. Print with "Detect Thin Walls": ON

CIRCLE CLAY CUTTER

Clay cutters in oval shape  Sizes: 15 mm, 20 mm, 25 mm, 30 mm and 40 mm  All my cutters have a knife edge design to get a clean cut and are therefore very strong.  Dimensions are taken from the longer, inner side.  The height is 10 mm and the cutting edge is 0.4 mm.  Print with "Detect Thin Walls": ON

OVAL CLAY CUTTER

Frame: ellipsis
Fork/Headset: moskvich workshop/stronglight delta
Crankset/Bottom Bracket: sram omnium/sram gxp
Pedals: token track
Drivetrain/Cog/Chainring/Chain: zodiak track 49t/zodiak 15t/hkk vertex njs
Stem: nitto b260aa/look ergostem
Saddle/Seatpost: kashimax/thomson elite offset
Wheels/Hub/Tire: mavic ellipse/continental gatorskin 25 mm

Fixed Gear Bike

This mount is optimized for Samsung A-series phones, but it can securely clamp many other phones as well. The clamp is designed thicker because it is intended to be used with a phone case.

The clamp base STL is recommended to be printed in PETG, as it is the most mechanically stressed 3D-printed part of the assembly.

Recommended print settings:

Minimum of 3 walls (perimeters)

Minimum of 15% infill

Hardware required:

8 × 25 mm M3 countersunk screws (to help resist pulling stress between layer lines)

2 × 50 mm M3 countersunk screws (for clamping the phone)

8 × 3.5 mm M3 heat-set inserts

2 × 8 mm M3 heat-set inserts

资源库

关于这些资源