This is the upper part of a teaching skeleton.

Pictures taken with D5300 and Nikkor 35mm

Human skull and neck

# 土木学会選奨土木遺産　万世大路(二ツ小屋隧道)
# Japan Society of Civil Engineers Heritage
The road which connects Fukushima city, Fukushima prefecture to Yonezawa city, Yamagata prefecture was opened in 1881(明治14年) and named after “Banseitairo  Road” by the Emperor Meiji.Futatsugoya Tunnel is one of the two tunnels which are located in Banseitairo  Road. It was taken expansion work to motor vehicles can go through in 1934(昭和9年). In 1966(昭和41年), an another tunnel was opened at new place to they can go through if it has heavy snow and Banseitairo Road became the “Abandoned road” after finished its role.  

![Image from Gyazo](https://i.gyazo.com/6fee71412c237d0e8fdfa281128ac31a.jpg)  


3D digitizing methods : Photogrammetry  
Software : Reality Capture  
Equipment : Nikon D750,NIKKOR 16-35mm f/4G,SB-910  
Images:  1916 photos  
Date : Apr. 2020

Futatsugoya Tunnel “Abandoned road” japan

Raw scan made on cinema movie projector that is standing in Kijów Centrum Cimena in Kraków, Poland
It was used for 35mm tape. Produced in the 1961 by Łódzkie Zakłady Kinotechniczne in Poland. The projector was designed for cinemas with rooms up to 1000 seats. It was then one of the most popular models used in Polish cinemas

The projector was equipped with an aspherical mirror with a diameter of 356 mm and a focal length of 120 mm. The standard lens provided by the manufacturer was Polkinar 1.8 / 100

The basic equipment of the projector was an optical sound reading system with two exposure bulbs - one in the working position, the other one in reserve (both fixed in the rotating holder, which allowed for exchange without interrupting the projection). In addition, the projector could be equipped with a 4-channel magnetic sound pickup

The projector was powered by a three-phase asynchronous motor. The engine was started using an automatic starter.
https://youtu.be/-xr1BMyKNWI
MusicInfo: Piano by AShamaluevMusic

Cinema Movie Projector AP5 - 1961

A 40+ years old Male hand.

Pictures taken with D5300 + Nikkor 35mm

Male Hand

For full functionality, we recommend downloading the source format.The converted file is intended only for use in the web viewer. In the original file, the following are fully preserved:✔ full scene structure✔ complete materials without reduction✔ accurate texture maps✔ proper object namingIf you intend to use the asset in a production environment, select the Original format.Ikea BAGGANAS 335mm furniture Handle GOLD

Bagganas 335mm Handle

A sculpted lich warlord figurine built for tabletop commanders who want a grimdark undead boss that reads instantly across the gaming table — part of the Undead Hierarchy Command Pack alongside a Skeletal Champion and Undead Necromancer.

WHAT YOU GET
- Two STL files: one pre-supported for resin printing, one unsupported for FDM or custom supports
- One GLB file for previewing or resin slicers
- Heroic 32–35mm scale, approximately 50mm total height including base
- Single static mesh with staff shaft contacting robe hem for supports-free silhouette
- Stylized-heroic form language: deep orbital eye sockets, visible ribcage through tattered open robes, bone-spike pauldrons, swept-back cape, and an ornate horned crown atop an oversized skull

PRINT SETTINGS
- Recommended layer height: 0.05–0.10mm on resin, 0.12–0.15mm on FDM
- Minimum wall geometry designed to 1.2mm on finger bones, staff diameter at or above 2mm
- Cape and robe panels designed undercut-free at the back for clean FDM output
- Supports: use the …

Lich Warlord Skeleton Miniature STL | Undead…

GUMGUM — Bone-Sworn Blademaster. He descends into the forgotten mines, into dark veins older than memory, and hunts the ancient things still breathing down there. What he brings back isn't just ore. It's bones. Relics. The raw matter the army is built from. His crown still burns with the flame of the last thing that tried to stop him.

TRUYUS — Hunt Rank: Duelist. Where Gumgum goes down, Truyus looks up. His prey flies. Ancient sky-born beasts, leather-winged horrors, the things that were never meant to be shot out of the air. He carves them out of the sky one shot at a time. The mask he wears used to belong to one of them.

"Your world had twelve apex predators. Now it has eleven. Wear the difference."

? Full campaign: sketch → sculpt → resin → painted final ? 28–35mm scale, silhouette-first design ? FDM & Resin ready | Unsupported + Pre-Supported STLs ? Personal Use License ? April Campaign — Draggar rises

Lore before models. Always.

Just wrapped these two up and wanted to sh

3D Print of Meet the first two hunters of the April Campaign — the Ossarium 

Pistola da 10 mm da fallout4/76 pistola modulare da Fallout 4 , fedele al 90%. Per completare l'assemblaggio occerrà una molla da biro per il movimento del grilletto, due perni da 6mmX35mm per bloccare il castello 1,3 e 4 insieme , 4 perni da 3mmX15mm per bloccare il castello 1, 5 e 6 insieme. Facoltativa una vite senza fine da 4 mm  da 10cm per aggiungere un ulteriore supporto ai vari incastri . Assente la texture sul calcio , non sono stato in grado di aggiungerla.

Pistola 10mm -Fallout4

-Basic bit driver for 1/4" (6.35mm) hex bits.-85mm in length.-A 5x3mm neodymium magnet can be glued in the bottom of the handle to keep bits from falling out. Printing tips:-Supports are build into the model, to be cut away after printing.-I think seams look better on 'random' setting. 03-29-2026 - initial release.

Basic Bit Driver Handle

Improved grip V2 -Basic bit driver for 1/4" (6.35mm) hex bits.-85mm in length.-A 5x3mm neodymium magnet can pushed (friction-fit) into the bottom of the handle to keep bits from falling out. Printing tips:-Model has small notches for tree supports to generate in the slicer-Seams look the best on 'random' setting, this would also improve the bitholding part. 05-25-2026 - initial release (V2).

Basic Bit Driver Handle V2

Size 45 Andiamo Pisco wintershoe

Photos taken with D5300 + 35mm Nikkor

Processed with Metashape + Blender + Instant meshes

Andiamo Pisco Wintershoe

This model of a grain of sugar is designed to help visually impaired participants understand the concept of magnification. It is part of a wider project called “Make it Visible” which can be used in conjunction with Museum in a Box (https://museuminabox.org/) to allow visually impaired people to explore tactile objects that teach them about natural history. It should be used in conjunction with the accompanying tactile label in this collection.

When printed at 35mm scale along its longest feature, this grain will be 50x larger than life and matches the section of 5pence coin, model: https://sketchfab.com/3d-models/5p-coin-p-scaled-to-14cm-8ded18e2e3bf41fb87ad71df7872c778

There is a matching label: https://sketchfab.com/3d-models/sugar-mib-label-fc65d3721fbf4cfbb7b414e633a26e13

Sugar Grain 1 Scaled To 35mm

Piel de Sapo melon, Galia melon, Watermelon and Honeymelon.

Pictures taken with D5300 and Nikkor 35mm.

Melon pack

Pineapple made with D5300+Nikkor 35mm and Metashape. 

Retopology done with instant meshes and normals baked with Blender.

Pineapple

Ribbed frosted glass and metal wall light. Suggest combining with 20W 35mm point light

Bathroom Pillar Light

Roll your dice inside something that rolls back — a shallow oval basin rimmed with asymmetrical writhing tentacles, built for Lovecraftian tabletop players who want their accessories to match the dread of their setting.

What's Included:
- STL file (slicer-ready, watertight single mesh)
- GLB file (for 3D viewers, web embeds, and AR preview)
- Recommended print scale: 130–150mm diameter, scaled for standard 16mm polyhedral dice sets

Design Details:
The basin measures 120–150mm across with a 25–35mm wall depth — deep enough to catch rolling dice, wide enough for a full polyhedral set. The rim is formed by asymmetrical tentacle protrusions that curl inward and upward as natural lip guards, preventing dice from escaping without relying on flat geometric walls. Surface texture simulates rough-carved chitin or otherworldly stone — the kind of material that shouldn't exist but somehow does.

Print Settings:
- Layer height: 0.2mm (FDM) / 0.1mm (resin)
- Infill: 15–20%
- Supports: recommended along the back rim ten…

Cthulhu Tentacle Dice Tray STL | Eldritch…

A new blue Vans shoe.

Photos taken with with D5300 + Nikkor 35mm.

Processed with Metashape + Instant meshes + Blender.

Unused Blue Vans Shoe

ДИКАРТ (DIKART) завод гипсовой лепнины:

- Москва, ул. Марксистская 3 стр. 3

- Санкт-Петербург, ул. Введенская 21, пом. 2

Тел.: +7(495)150-21-95, +7(812)317-11-95, +7(800)707-52-95

info@dikart.ru

https://dikart.ru

EXPORT department

export@dikart.ru

Кессон-2 500x500Hx35mm

Frau Shoe

4k Texture+Normal map+Occlusion+Cavity

photogrammetry: 301 photos - 35mm lens

Frau Shoe

For complete workflow compatibility, we recommend downloading the original file.The Converted version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ original scene hierarchy✔ complete materials without reduction✔ correct PBR texture maps✔ correct object namesIf you plan to use this model in production, download the source file.Ikea STERN S HANDLE 135MM

stern s Handle 135mm

# [Download](https://portfolioo-3d.pages.dev/731dd08d-bf61-4bb6-a970-5406865a9428)

资源库

关于这些资源