The Punishment- A digital study of Farnese Hercules sculpture 
This work of mine is a digital study I made on Farnese Hercules sculpture. Ancient Roman sculptures carry lot of stories and mysteries with them.This is called Farnese Hercules as it was excavated by the Farnese family. Wildly powerful figure with incredible musculature ,but also the figure is exhausted with tiredness on his face. The statue is Hellenistic with taller proportions and a smaller head. The original sculpture was made by Lysippos and later reproduced by Glykon. 
#classicsculpture #digital #sculpture #3D #3dprinting #vfx #MrX #zbrush #keyshot #anatomy #character #power #hercules

The Punishment- A study of Farnese Hercules

The Bureau doesn't send a warning. It sends four operatives, a sealed document, two loaded pistols, a blade, and a grimoire that probably shouldn't exist.?️ Mr. Rook — The one who prefers getting close. Dangerously close. ? Mr. Ledger — Always carrying something classified. Never explains why. ? Mr. Dusk — Both hands occupied. Both targets already marked. ? Mr. Tome — The Bureau's archivist. The magic is undocumented. So is he.

They wear the hood. They carry the badge. They do not explain themselves.

Four operatives. One March Campaign. A few slots remain — the Bureau is almost fully deployed.

? Link in bio → Barbaross Brotherhood

#miniaturepainting #miniatures #3dprinting #STLfiles #tabletopgaming #wargaming #DnD #dungeonsanddragons #rpgminiatures #fantasyminiatures #miniaturedesign #indiesculptor #supportlocal3dprint #resinprinting #miniaturemaker #darkfantasy #grimdark #characterdesign #originalIP #worldbuilding #STLminiatures #Patreon #patronsupported #3dprintedminis #hood

3D Print of Introducing the Foursmen VIP

We spent all month building the Overtimers universe. Foursmen. Field operatives. Bureau badges.

You thought you'd seen everything.

Then the Boss decided to show up.

BIGGO BOSS HENRY. The one who built the first Office. Before there were rules, there was Henry — and Henry wasthe rule.

He doesn't file reports. He doesn't send agents. He walks through the door himself, a flame in one hand and two cannons on his back, and the assignment ends.

This is the March Campaign's final reveal — and we saved the biggest for last.

STL drops through Barbaross Brotherhood on Patreon. Pre-supported & unsupported. Print-ready. Battle-ready.

#BarbarossMiniature #BiggosBossHenry #MarchCampaign #Overtimers #OriginalIP #MiniatureDesign #TabletopGaming #WargamingMinis #3DPrintedMinis #STLMiniatures #ResinPrinting #MiniaturesOfInstagram #MiniaturePainting #PrintAndPlay #DarkFantasy #GrimDark #FantasyMiniatures #RPGMinis #DnDMiniatures #TabletopRPG #FantasyArt #CharacterDesign #IndieDesigner #3DPrinting 

3D Print of BIGGO BOSS HENRY. The one who built the first Office. Before the

Bald head. Aviator goggles. A leather jacket held together by sheer attitude and chains. And a vehicle that shouldn't exist — but somehow does, and it runs.

Jeff doesn't talk much. He doesn't need to. His engine does the talking.

? This month, Honda Man Jeff is a FREE GIFT for all Barbaross Brotherhood members. Whether you're printing in resin or FDM, he's ready to roll off your build plate and straight onto your tabletop.

What's inside: ✦ Unsupported STL ✦ Pre-Supported STL (optional) ✦ Separate Base File (optional)

36mm scale. Designed with printability in mind — every bolt, every chain, every scowl. Painted or raw resin, this guy commands the table.

— Sculpted & designed by Barbaross Miniature

#barbarossminiature #3dprintedminis #stlminiatures #resinprint #fdmprint #miniaturepainting #tabletopgaming #wargaming #printedminis #3dprinting #originalip #scifiminiature #postapocalyptic #wasteland #miniaturecommunity #stlfiles #minipainting #resinprinting #tabletop #minis #rpgminiat

3D Print of He doesn't ride into battle. He rolls.  Meet Honda Man Jeff

He didn't ask for this contract. He didn't ask for the Slime. He definitely didn't ask for whatever their dynamic has become.

But here we are.

The Veteran is the first Bureau operative to make it out of the concept phase and into your hands — and honestly, sculpting this one was genuinely fun. The character wrote himself. The silhouette locked in fast. The stylization went somewhere I didn't expect, and I'm glad it did.

This is what BARBAROSS miniatures are supposed to feel like: characters with a reason to exist, built with a personality first and a model second.

He's ready. The Slime is armed. The Bureau has its first field-ready operative.

Available now for Barbaross Brotherhood members. One subscription. Every release. Starting with this one.

(Link in bio.)

#barbarossminiature #stlminiatures #3dprinting #miniaturedesign #printedminis #tabletopRPG #dndminiatures #wargaming #resinprinting #3dminiatures #minipainting #indiesculptor #sculptorlife #originalcharacter #fantasyminia

3D Print of THE VETERAN — Model Complete. STL Live. "Retired. Reassigned. Th

He's not reckless. He's efficient. Every lazy, ancient Slime adventurer who's too old to dodge and too stubborn to retire ends up requesting the same handler. The one who doesn't ask questions. The one who shows up, oversized cannon on his shoulder, Slime on his head, sunglasses on despite it being pitch dark — and gets the job done.

Young Sterr doesn't follow protocol because he rewrites it mid-mission. The Slime on his head? It chose him. Probably because he never runs.

AGENT YOUNG STERR ? Bureau Operative — Slime Bureau Division ? Unsupported STL + Pre-Supported STL available ?️ FDM & Resin Ready — Personal Use License

Part of the April Campaign — Barbaross Brotherhood.

#miniaturepainting #PrintedMinis #3dprinting #resinprinting #tabletopgaming #wargaming #rpgminiatures #fantasyminatures #dndminiatures #monsterminis #slime #characterdesign #miniaturephotography #paintedminiatures #minipainting #miniatureartist #stlfiles #stlminiatures #blendersculpt #originalip #3dprintedmini

3D Print of "The contract says protect. Doesn't say how." Meet Agent Young S

Three Bureau operatives. Each one specialized. Each one dangerous in their own right — and together, they're a walking demolition order with paperwork to match.

The heavy on the left carries enough firepower to level a district. The analyst on the right has already calculated exactly how long you have left. And the one in the center? He doesn't need to say a word. The mechanical arm says it for him.

This is the April Campaign for Barbaross Brotherhood — and Demoloto Unit 128 is just the beginning of what's coming this month.

STL files. Pre-supported. Print-ready. The Bureau is deploying.

? Link in bio.

#BarbarossMiniature #BarbarossBrotherhood #DemolotoUnit128 #STLfile #3dprinting #resinprinting #miniaturepainting #tabletopgaming #wargaming #RPGminiatures #PrintedMinis #originalIP #miniaturedesign #3Dsculpt #grimdark #darkfantasy #characterdesign #indiegame #patreonartist #supportsmallartist #fantasycharacter #tabletopRPG #DnDminis #scifiminatures #worldbuilding #miniaturecommuni

3D Print of They don't send one. They send a Unit. Demoloto Unit 128 has ent

Add a touch of ancient mysticism to your everyday carry with this highly detailed Pharaoh-themed lighter sleeve. Designed specifically for standard BIC lighters, this case features a striking "Memento Mori" aesthetic combined with iconic Egyptian symbols. Key Design Elements: A central Pharaoh skull wearing the traditional Nemes headdress, a sacred scarab beetle, and miniature sphinx figures at the base. Originality: The design utilizes high-relief 3D textures to provide a tactile, stone-like grip. Use Case: Ideal for collectors of EDC (Everyday Carry) gear, fans of Egyptian mythology, or as a unique project for hand-painting enthusiasts. Inspiration: Inspired by the grandeur of ancient Egyptian tombs and timeless artifacts. 3DPRINTING SETTINGS: Recommended Machine: Resin (SLA/DLP) is highly recommended to preserve fine details. Material: Tough or Standard Resin. Resolution: 0.03mm to 0.05mm layer height for maximum clarity. Orientation: Print at a 0-45 degree angle with supports to ensure a smooth internal fit for the lighter. Finishing Instructions:  Sanding: Carefully sand support marks to smooth the surface. Painting: For an "authentic artifact" look, apply a black primer followed by a silver/pewter dry-brush technique. The skull's eyes can be detailed with vibrant green paint as seen in the sample.  Safety Note: Decorative use only. Ensure the lighter fits snugly without being forced.  

BIC Lighter Case - Egyptian Pharaoh Skull

Pin-up astronaut model — completely free for all fans! 🚀✨Thank you so much for your support and for downloading our model. We hope you enjoy printing, painting, and displaying this retro sci-fi collectible. More free and exclusive creations are coming soon, so don’t forget to follow us on Patreon and stay tuned for future releases. Enjoy the adventure through space! 🌌  Don’t forget to follow us on Patreon — thank you!  https://www.patreon.com/exclusive3dprinting  ..

资源库

关于这些资源