Detailed textured Bismark battleship.
120k polys total.

<p>Every unit detailed&textured separently:</p>
* Bismark and superatructures 
* 38cm SKC/34 main gun (2 ver.)
* 15cm SKC/34 gun (2 ver.)
* 10.5cm SKC/33 gun (2 ver.)
* 38mm SKC/30 Flack
* 20mm Flak Vierling
* 20mm FLak
* 2 boats
* other staff

 contact me via email: everlasting17th@gmail.com

Bismark battleship

Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

Edit 11/2020 : made this asset downloadable, feel free to use it in your project.
old 8 mm camera

this is a reduced poly version of this project :
https://www.artstation.com/artwork/zWvn2

displace is replace with a normal map instead

Old 8mm Camera

This is a 3D scan of the holotype fossil specimen of *Calymene blumenbachii*, the "Dudley Bug", one of the best known species of trilobite. This specimen comes from Dudley from the Much Wenlock Limestone Formation, and lived around 428 million years ago, when the Midlands was covered by warm, shallow, tropical seas. Digitised using an Artec Spider 3D scanner by University of Birmingham Palaeobiology & Palaeoenvironments undergraduate student Luke Meade.

Dimensions of the specimen:

Length: 101mm

Width: 73mm

Height: 38mm

The "Dudley Bug" trilobite

"The Berthier rifles and carbines were a family of bolt-action small arms in 8mm Lebel, used in the French Army, and French Colonial Forces, from the 1890s to the beginning of World War II (1940)"

This model is a high quality, with photorealistic textures that will enhance detail and realism to any of your projects or scenes. This model is fully textured, well detailed that will allow you good close up renders without losing much of its quality.

French Berthier Rifle WW1-WW2 Weapon

You will get the Berthier Rifle, and very high quality 4k textures (metalic, normal, base color, roughness)
Modeled in blender, textured in substance 3d painter.

FREE French Berthier Rifle WW1-WW2 Weapon

Curled rat netsuke by Suzuki Masanao, made in the second half of the 19th century CE. About 38mm ( 1 1/2 inches) in diameter. (Scaled in VR to about 10cm.)

A little more information about the object here:

https://collections.artsmia.org/art/37576/curled-rat-suzuki-masanao

Netsuke - curled rat

"Anti-material bolt action sniper rifle chambered in 12.7x108mm ammunition. 745 gr bullets have a lower muzzle velocity, but remain devastating even at very long ranges."

Call of Duty: Black Ops 6 - HDR

**Cyberpunk Vehicle – High Detail STL (Printable)**

A detailed cyberpunk vehicle designed for 3D printing and diorama builds. This model features layered mechanical detail, aggressive styling, and a realistic silhouette suited for futuristic street scenes, industrial environments, or display setups.

Built with clean geometry and printability in mind, the model maintains strong detail at small scales while remaining support-friendly for resin printing.

**Features:**

* High-detail cyberpunk design
* Clean, print-ready mesh
* Strong proportions and surface detail
* Support-friendly structure

**Scale:**
Optimized for 1/64, 1/35, and 28mm, with flexible scaling.

**Use Cases:**
Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

*Supports may be required depending on orientation.*

Cyberpunk Vehicle – High Detail STL (Printable)

Cyberpunk Car – High Detail STL (Printable)

A detailed cyberpunk car designed for 3D printing and diorama use. Built with clean geometry and strong proportions, this model captures a realistic pose suitable for futuristic street scenes, industrial environments, or tabletop setups.

Optimized for printability, the model is support-friendly and retains sharp detail when scaled.

Features:

High-detail sculpt Clean, print-ready mesh Strong silhouette and pose Suitable for resin printing Scale: Designed for 1/64, 1/35, and 28mm, with flexible scaling.

Use Cases: Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

Supports may be required depending on orientation.

Minor clean up may be required in Blender depending on slicer

cyberpunk Trans Am

**Cyberpunk Character – High Detail STL (Printable)**

A detailed cyberpunk character designed for 3D printing and diorama use. Built with clean geometry and strong proportions, this model captures a realistic pose suitable for futuristic street scenes, industrial environments, or tabletop setups.

Optimized for printability, the model is support-friendly and retains sharp detail when scaled.

**Features:**

* High-detail sculpt
* Clean, print-ready mesh
* Strong silhouette and pose
* Suitable for resin printing

**Scale:**
Designed for 1/64, 1/35, and 28mm, with flexible scaling.

**Use Cases:**
Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

*Supports may be required depending on orientation.*

cyberpunk gang sniper, female, slim build

**Cyberpunk Character – High Detail STL (Printable)**

A detailed cyberpunk character designed for 3D printing and diorama use. Built with clean geometry and strong proportions, this model captures a realistic pose suitable for futuristic street scenes, industrial environments, or tabletop setups.

Optimized for printability, the model is support-friendly and retains sharp detail when scaled.

**Features:**

* High-detail sculpt
* Clean, print-ready mesh
* Strong silhouette and pose
* Suitable for resin printing

**Scale:**
Designed for 1/64, 1/35, and 28mm, with flexible scaling.

**Use Cases:**
Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

*Supports may be required depending on orientation.*

Statue of a Stoic Stance

Cybernetic Vanguard- MAXTAC

Cyberpunk Character – High Detail STL (Printable)

A detailed cyberpunk character designed for 3D printing and diorama use. Built with clean geometry and strong proportions, this model captures a realistic pose suitable for futuristic street scenes, industrial environments, or tabletop setups.

Optimized for printability, the model is support-friendly and retains sharp detail when scaled.

Features:

High-detail sculpt
Clean, print-ready mesh
Strong silhouette and pose
Suitable for resin printing
Scale: Designed for 1/64, 1/35, and 28mm, with flexible scaling.

Use Cases: Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

Supports may be required depending on orientation.

Minor clean up may be required in Blender depending on slicer

cyberpunk corporate exile NPC, female,

cyberpunk biker gang member, athletic female

cyberpunk street medic, calm middle aged man,

White Primed Pine - 32mm strings, Aprons and 18mm risers
Oak – 21mm Treads, Oval continuous handrails, base rails
30mm Black metal newel posts. Including landing gallery return balustrade, aprons and cover moulds.
12.5mm Straight and Oval metal spindles alternating.

Bentlsey - 2

Cyberpunk Character – High Detail STL (Printable)

A detailed cyberpunk character designed for 3D printing and diorama use. Built with clean geometry and strong proportions, this model captures a realistic pose suitable for futuristic street scenes, industrial environments, or tabletop setups.

Optimized for printability, the model is support-friendly and retains sharp detail when scaled.

Features:

High-detail sculpt Clean, print-ready mesh Strong silhouette and pose Suitable for resin printing Scale: Designed for 1/64, 1/35, and 28mm, with flexible scaling.

Use Cases: Dioramas, tabletop scenes, display builds, and kitbashing.

Part of the Inked3D collection focused on realistic, scene-driven miniatures.

Supports may be required depending on orientation.

Minor clean up may be required in Blender depending on slicer

资源库

关于这些资源