Print Preview:
![](https://puu.sh/jqt3y/25967d26d1.jpg)

The statue of Edward Snowden, called by its creators Prison Ship Martyrs' Monument 2.0, was an ephemeral, illegally-installed public statue of Edward Snowden, an American whistleblower who leaked classified information from the National Security Agency (NSA) and was charged with federal crimes as a result. The bronze-like statue was placed in Fort Greene Park in Fort Greene, Brooklyn, New York City, on April 6, 2015. It was attached to a Doric column on the perimeter of the park's Prison Ship Martyrs' Monument, a memorial and which honors more than 11,500 American prisoners of war who died in the American Revolution.

The statue was mounted by three anonymous artists and their helpers, who were dressed in white helmets and reflective vests of Parks Department workers, early in the morning of April 6, then covered and taken down by NYC Parks officials later that day. 

http://goo.gl/DM7P2H

Bust: https://skfb.ly/Es6I
Column: https://skfb.ly/BUuZ

Edward Snowden At Fort Greene Park

Micro CT scan of a Blaschka model of a Moon Jellyfish from the D'Arcy Thompson Zoology Museum at the University of Dundee. 

DUNUC 9318 - Glass model of Aurelia aurita (Moon Jellyfish). Width=9cm.

D'Arcy Thompson acquired a set of Blaschka's exquistely delicate glass models in 1888. In Growth and Form, D'Arcy refers repeatedly to the art of the glass-blower, perhaps thinking of these very models.  

Scanned with a Nikon XT H 225ST micro CT scanner.  The resulting file is exported as an stl. and imported in to Zbrush.  

We’d love to hear from you if you download or print our models, especially if you use them in education and outreach.

Blaschka Glass Model of Moon Jellyfish

A recreation of the RCM controller or RCMA controller which allows for individual control of the chopper, blower, and rotator of the siren all with individual controllers and an agistat timer inside.

The RCM works by using three speperate motor relays in order to individually control sections of the siren. Eg: Chopper, Blower,. These devices and their individual relays allow people to manually test only one or all specific pieces of the siren.

Federal signal RCM

With both of my new controllers and a test horn shade so that I can add detail or just darkness to my air raid siren horns. If you dont see it wither it didn't work well or I turned it off.

Including a newly painted thunderbolt 1000T, RCMA cabinent, and New blower. Compare this one to my VA thunderbolt pole 58.

Thunderbolt 1000T Rooftop Style

So, Greenville TX had a system of ACA hurricanes and I just modeled one based off of the style of other ones I've seen on Google maps.

I looked at the ACA hurricane siren's blower & horn design and redid both again and I think I hit the lottery with this design due to its accuracy. I also redid the rotator and I almost kept this HighPoly chain model for the rotator but opted for a belt because the chain wouldn't correct it's gemoetry like 3d builder tries to do.

So I'd either remake the chain or leave it an inaccurate belt.

Greenville Style ACA Hurricane

So, These Microwave Dishes are new as my old dish models are trashed. The pole was made completely in designspark mechanical as I found a new technique to make patterns so I can make things like the ribbed part of the Hurricane 130 blower or Vertical-Proper-Latteral-Support-Mast-Structures such as the one seen here or make other things that involve set numerical paterns.

The other thing is the new dish is kind of better as I used a blender cloth simulations final frame to mold prefectly to my own microwave dish and make the cool radome on the dish you see on the model.

Finally, Until I make a beacon luminaire, I make a cool 3 way blankout sign design for the top indication luminaires.

Prefabbed Radio Tower With Blankout signs

IDK where I would say this is located, mrobably somewhere like Weastmoor Dr. St. Cloud, MN. The Weastmoor Dr. Idk if thats real and this isn't really located there.

The story of this siren would be it was installed in 1974 and suffered chopper motor failure in 1989 so they refurbished as a whole unit in 1991, the blower failed in 1998 because the belt had holes because the blower haden't been lubricated at all since its instalation as no one really wanted to do it and they were at a lack of funds for this siren located in a small tucked off area the no one pays mind to. The belt was literally eaten up so a volunteering enthusiast decided to refurbish the whole thing. They painted it silver and put it back up after completely repalcing the blower motor & belt.

This siren was put back up in a different feild, more open to the public becase it being tucked off made maintenence easy to forget as it was routine when it was first installed but the area made that dificult, now it is fixed and still roars!

SilverBolt 1003

So, you can tell this ain't from no DEKALB IL. This is fictional and is a thunderbolt siren with a low mounted blower pipe and a new RCM1A control box. This siren also includes a voltage shutoff and my new thunderbolt head.

Also, If you want to use my models either ask & credit me or just credit me.

Thunderbolt 1000T Dekalb, il

Im making lots of Final air raid siren models, here is the Alerting communicators of America (ACA) Hurricane 130. This siren reaches 130 decibels when supercharged and utilizes a vertical blower which was splashed lubricated (I think) and had crazy issues with the blower simply because it was vertical and not horizontal (I think again).

   This is just a recreation of the horn and rotator, the rotator is completely redone including everything inside of it. I might remake the chopper next but honestly, this is looking good so far!

ACA Hurricane 130 Final

My possibly final rendition of the Federal Signal thunderbolt 1000T Dual Tone Air raid siren.

The original Siren that I made sourced old parts and small refurbishments but needed a almost full remake as the wires were made from a bumped PNG and the motor was old. I also redid the 1003 and can possibly do B series thunderbolts and C series Blowers!

I also remade my Blower, mainly the motor though and now the thunderbolt looks better and is way more detailed even sporting a completely redone rotator, chopper, wiring and chopper cap!

However, I resourced my ChopperCap serial number because that has become the staple that the thunderbolt is mine.

资源库

关于这些资源