This is a 3D animation ("Shelly") of a near-adult loggerhead (ID=982.000406129037) sea turtle (*Caretta caretta*, straight carapace length=86 cm) that was initially captured on June 23, 2017 by the Inwater Research Group, and then photgraphed with the Beastcam technology with 20 Canon G16 cameras.  Photographer Christine Shepard operated the cameras and the sea turtle was released that same day in good condition.  The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin  used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 47A - Loggerhead Sea Turtle

This is an animation (“Mar”) of a hatchling Hawksbill (ID Ei1801) sea turtle (*Eretmochelys imbricata*, straight carapace length 11.8 cm) that was initially rescued by the Loggerhead MarineLife Center, and then photographed with the Beastcam technology with 30 Canon G16 cameras. The sea turtle was released soon after in good condition. The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 50A - Hawksbill Sea Turtle

This is a 3D animation of a large adult Timber rattlesnake (*Crotalus horridus*) from New England Reptile Distributors (https://new-england-reptile.myshopify.com/). 

The raw photogrammetry scan was created using the Beastcam Technology, and the ventral side was added from a different snake.  The full model was retopologized and rigged by animator Daniel Daye from the University of Massachusetts at Amherst.

The 3D model was created with the Beastcam technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 31A - Timber Rattlesnake

This is a 3D animation of a Blacktip shark (*Carcharhinus limbatus*, ID 730) captured in April 2016 in collaboration with the Discovery Channel and Dr. Neil Hammerschlag at the Universiy of Miami.  The shark was captured, photographed with the Beastcam technology, and released unharmed.  3D artist Robert Gutierrez converted the raw photogrammetry scan to this low-poly model, as well as animated it.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 9A - Blacktip Shark

This is a 3D animation ("Scallywag") of a juvenile green sea turtle (ID=CM1648) (*Chelonia mydas*) that was captured on December 23, 2016 by the Loggerhead MarineLife Center at Blowing Rocks Preserve.  The turtle was attacked by a shark, but survived.  It was photographed with the Beastcam technology with 20 Canon G16 cameras by Christine Shepard.

The 3D model was initially created through a photogrammetry scan using Capturing Reality.  Animator Jer Bot used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center provided feedback on the movements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 46A - Subadult Green Sea Turtle

This is a 3D model  of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60A - Cyprus Racer Snake

This is a 3D model ("Mary") of an adult (curved carapace length 940 mm) female flatback sea turtle (Natator depressus, PIT tag 900119000520197, captured 11/21/17, Thevenard Island, Western Australia) as part of the Department of Biodiversity, Conservation and Attractions' North West Shelf Flatback Turtle Conservation Program (DBCA-NWSFTCP) with Scott Whiting (DBCA), Sabrina Fossette (DBCA) and Adrian Gleiss (Murdoch University). The turtle was photographed on a nesting beach using the Beastcam system and released in good condition. The 3D model was created through a photogrammetry scan using COLMAP and Autodesk REMAKE. Animator Jer Bot used Blender to reconstruct the sea turtle. Credit should be given to the Digital Life project and NWSFTCP: “The author(s) acknowledge the Digital Life project and the Department of Biodiversity, Conservation and Attractions’ North West Shelf Flatback Turtle Conservation Program for creation of the 3D flatback turtle model”.

Inquire about licensing: **www.digitallife3d.org**.

Model 53A - Flatback Sea Turtle

This is an animation of a house gecko (Hemidactylus platyurus) photo-captured with the Beastcam MACRO live in the Irschick lab at the University of Massachusetts at Amherst. Mass is 4.6 grams. CGI artist Johnson Martin retopologized and reconstructed the gecko from images captured with the Canon G16 cameras. We partnered with Cameron Siler from the University of Oklahoma and Tony Gamble from Marquette University to create this model, which they will use for testing models of predation and gliding in geckos.  Creation of this model was supported by NSF grant 1657662.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 58A - House Gecko

This is a 3D model of a **Sling tailed Agama lizard** (*Stellagama stellio cypriaca*) scanned using the Beastcam MACRO on a live lizard in Cyprus. The mass of the lizard is 78 grams. CG artist **Jer Bot** retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos.  The construction of this model is part of the post-doc research of Dr. **Savvas Zotos** (POST-DOC/0916/0034)(https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 59A - Sling Tailed Agama

This is a 3D animation of a tokay gecko (*Gekko gecko*) that was originally captured by the Beastcam technology.  Animator Johnson Martin converted the raw photogrammetry scan to this animated walk cycle.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 40A - Walking Tokay Gecko, "Big Mama"

This remarkable golden poison frog (*Phyllobates terribilis*) lives on the ground in humid forests along the Pacific coast of Colombia. They breed by females laying eggs on the ground, in which males transport the larvae to permanent freshwater pools. They are mostly commonly found as mint green and yellow however they can occur as orange. This frog is well known for its densely toxin-coated skin. 

This animal was captured by the Beastcam MACRO from the collection of Michael Wallitis.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 39 - Golden Poison Frog

This is a 3D model (“Tumbleweed”) of a juvenile Kemps Ridley Sea Turtle (ID 132) (*Lepidochelys kempii*) that was initially rescued by the New England Aquarium in Massachusetts, and then photographed with the Beastcam technology with 30 Canon G16 cameras. The sea turtle was released soon after in the Southern United States in good condition. The 3D model was initially created through a photogrammetry scan using Capturing Reality.  We digitally scrubbed the ID tag on the shell.

Animator Robert Gutierrez used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Connie Merigo from the New England Aquarium each provided feedback on the movements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 52A - Kemps Ridley Sea Turtle (no ID)

This is a 3D model of a Juvenile dwarf Caiman (*Paleosuchus palpebrosus*) which was located at New England Reptile Distributors (NERD) (https://new-england-reptile.myshopify.com/). 

The model was created with the Beastcam technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 32 - Cuvier's Dwarf Caiman

This is a 3D model of Emperor Scorpion (*Pandinus	imperator*) captured at Irschick Lab at Umass Amherst in March 2016.

The emperor scorpion is one of the largest scorpions in the world. Widely kept as pets, this West African species occurs in rainforest and savanna habitats.

Please go to our website (www.digitallife3d.org) to learn more.

The 3D model was created by the Beastcam MACRO technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 4 - Emperor Scorpion

This is a 3D model of Tokay gecko (*Gecko	gekko*) captured at Irschick Lab,  UMass Amherst in November 2016.

One of the largest gecko species, this species is known to defend itself with a strong bite.  Tokay geckos are highly arboreal species found on trees and other similar vegetation in various parts of Southeast Asia.

Please go to our website (www.digitallife3d.org) to learn more.

The 3D model was created by the Beastcam MACRO technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 12 - Tokay gecko

This is a 3D mesh of a racer snake (Dolichophis jugularis) scanned using the Beastcam MACRO on a live snake in Cyprus. Both a "coiled" and "straight" snake are provided.  The mass of the snake is 479 grams. CG artist Jer Bot retopologized and reconstructed the snake in the open source 3D animation software Blender (blender.org). He did this through images captured using an array of six Canon G16 cameras and other reference photos. The construction of this model is part of the post-doc research of Dr. Savvas Zotos (POST-DOC/0916/0034) (https://retrack.terracypria.org) and is co-financed by the European Regional Development Fund and the Republic of Cyprus through the Research and Innovation Foundation. This 3D model will be used as a means for both studying and presenting the species movement and behavioural patterns.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 60B - Cyprus Racer Snake Mesh

This is a 3D model (“Tumbleweed”) of a juvenile Kemps Ridley Sea Turtle (ID 132) (*Lepidochelys kempii*) that was initially rescued by the New England Aquarium in Massachusetts, and then photographed with the Beastcam technology with 30 Canon G16 cameras. The sea turtle was released soon after in the Southern United States in good condition. The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Robert Gutierrez used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Connie Merigo from the New England Aquarium each provided feedback on the movements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 51 - Kemps Ridley Sea Turtle (with ID)

This is an animation of a flying gecko (*Ptychozoon kuhli*) photo-captured with the Beastcam MACRO from a live gecko in the Irschick lab at the University of Massachusetts at Amherst. Mass is 13.8 grams. CGI artist Johnson Martin retopologized and reconstructed the gecko from images captured with the Canon G16 cameras and other images primarily using Open-source tools such as Blender. We partnered with Cameron Siler from the University of Oklahoma and Tony Gamble from Marquette University to create this model, which they will use for testing models of gliding in geckos. Creation of this model was supported by NSF grant 1657662.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 57A - Flying Gecko

This remarkable golden poison frog (*Phyllobates terribilis*) lives on the ground in humid forests along the Pacific coast of Colombia. They breed by females laying eggs on the ground, in which males transport the larvae to permanent freshwater pools. They are mostly commonly found as mint green and yellow however they can occur as orange. This frog is well known for its densely toxin-coated skin.  This "Mint" color morph differs from the "Yellow" morph that is also part of our collection.

This animal was captured by the Beastcam MACRO from the collection of Michael Wallitis.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

资源库

关于这些资源