This is a free fan resource of the Venator Star Destroyer corridor inspired by The Clone Wars. 

This Prefab comes with a preview to see what you can create with these peices I have suppied.

Note for Unreal Engine Users
For some reason I do not know why Unreal Engine has these textures as super reflective. If you come across this problem I would recommend increasing the brightness of the roughness maps to 3.0 for the floor and 4.2 for the wall textures etc. 

Btw I would also love to hear back from projects my work has been used on.

Star Wars: The Clone Wars: Venator Prefab

**IMPORTANT**
This is an older model and the quality isn't the best, but maybe it will still be useful for someone so it's still avaible for free

**OLD** Phase II Clone Trooper + DC-15s (Rigged)

The Low Altitude Assault Transport, also known as a Republic attack gunship or Assault Gunship, was a gunship used by the Grand Army of the Republic during the Clone Wars. 
The Low Altitude Assault Transport is just one of the many Star Wars exhibits that can seen in the Star Wars Virtual Museum.

Download the Star Wars Virtual Museum here: http://www.starwarsvirtualmuseum.com

LAAT - Low Altitude Assault Transport

X-wing starfighters are the predecessor of the Clone War era Aggressive ReConnaissance-170 starfighters. They were designed for dogfighting shortly before the start of the Galactic Civil War. Their name derives from the X shape they produce when in attack formation.

X-wing starfighter | T-65C-A2

A pack of buildings on based on Coruscant from Clone Wars and Old Republic.

Star Wars: Buildings Coruscant

http://steamcommunity.com/sharedfiles/filedetails/?id=905412745

Star Wars  Clone Trooper

This is the same model as my Updated P2 Clone, but with a 501st skin.

Join the Discord! https://discord.gg/J6Y2SqW

Clone Trooper Phase2 (501st)

animated eagle was made on i clone 6 and export it as fbx with animation  useing 3d exchange all matrials and textures in maxson cinema 4d

animated EAGLE

I've gotten a lot of questions about why my previous Clone Trooper models are so similair to the EA Battlefront 2 Clones, and have been accused of stealing it for myself, so because of that, I've decided to remake my model so it isnt as similar anymore.

This new one is 35.6k tris and all textures are 2048x2048. I've also gone ahead and rigged it, though disclaimer, there may be some minor clipping issues, but I tried my best to catch them where I saw them.

Enjoy the new model!

Join the Discord! https://discord.gg/J6Y2SqW

Clone Trooper Phase 2 (Shiny) [Updated]

Hi

Here is a beauiful asian girl model in zbrush texture made in character creator 4.2 Animation in Iclone 8 
and another thing was made in blender 

A animated and rigged asian girl 
with dance animation 
with texutre 
with bones
with clothes
with beautiful body
with perfect chest
with beautiful face 
with shoes 

If you Face Any Problem So First Really Soory And second Comment 

If you want Zbrush And Character Creator Project File Then Comment me 


Thanks A Lot

Beautiful Asian Girl

To go with my updated Phase 2 Clone Troopers, I've also made their respective Phase 1 counterparts.

This new one is 33.2k tris and all textures are 2048x2048. I’ve also gone ahead and rigged it, though disclaimer, there may be some minor clipping issues, but I tried my best to catch them where I saw them.

Enjoy the new model!

Join the Discord! https://discord.gg/J6Y2SqW

Clone Trooper Phase1 (Shiny) [Updated]

So taking me quite some hours I can proudly present my Phase I Clone Trooper as seen in Star Wars Ep. 2 Attack of the Clones and in a more stylised version in Star Wars the Clone Wars.

It is propably much more high poly than it needed but I like it and I honestly don't want to retopologize it atm.

As human base I used and heavily modified the [human base mesh from angelaxiotis](https://sketchfab.com/3d-models/free-base-mesh-e4049b5274904bf5ab91001b2bc25eae) and it really isn't good at all and maybe you could get problems rigging it because I went a bit to hard with "automated retopology" in Blender but well, I wanted it to look good and it does. Maybe I will one day come back and change it because I want to rig it, but idk yet.

Clone Trooper Phase I

Here is an IG-11 droid (from Jon Favreau's "The Mandalorian" series) in action. 

Of course, I've cut (as always, lazy me) the high-poly phase and kept it simple and cartoonish (who said Clone Wars?!?). Weapons (and fingers) are exaggerated on purpose to look more heavy and mighty.

Enjoy!

Eyegee Droid

The Chevrolet S-10 is a compact pickup truck that was produced by Chevrolet. It was the first domestically built compact pickup of the big three American automakers. When it was first introduced as a "quarter-ton pickup" in 1981 for the 1982 model year, the GMC version was known as the S-15 and later renamed the GMC Sonoma. A high-performance version was released in 1991 and given the name of GMC Syclone. The pickup was also sold by Isuzu as the Hombre from 1996 through 2000, but only in North America. There was also an SUV version, the Chevrolet S-10 Blazer/GMC S-15 Jimmy. An electric version was leased as a fleet vehicle in 1997 and 1998. Together, these pickups are often referred to as the S-series.

Chevrolet S10

> The Low Altitude Assault Transport/infantry (LAAT/i), also referred to as the Republic Gunship, Republic attack gunship, Assault Gunship or LAATi, and nicknamed a larty, was one of the several models in the Low Altitude Assault Transport line of starships that mainly served as gunships and troop transports for the Grand Army of the Republic during the Clone Wars. Its role was to transport Clone troopers as well as offering air-to-ground and air-to-air support for the Galactic Republic against the Confederacy of Independent Systems. The LAAT/i gunship saw extensive use in numerous battles and campaigns of the Clone Wars.

[Source](https://starwars.fandom.com/wiki/Low_Altitude_Assault_Transport/infantry)

LAAT/i Gunship

May the 4th be with you!
[LAAT VAR](https://skfb.ly/oouDH) by Just Ryk shared under CC-BY 
[Clone Trooper Phase1](https://skfb.ly/6Sy7F) by Marr Velz shared under CC-BY
[Datapad](https://skfb.ly/oJCIB) by AnnoyingPanMannn shared under CC-BY
[Short-Range Antenna](https://skfb.ly/oLHzq),[ Lambda Pilot](https://skfb.ly/oPtBp), [Floor Light](https://skfb.ly/oNZQQ) by tegnemaskin shared under CC-BY 
[R2-D2](https://skfb.ly/6RrxG) by IgorLethe sahred under CC-BY 
[Gonk Droid](https://skfb.ly/6FUrP) by dbugg1138 sahred under CC-BY 
[DC-15A](https://skfb.ly/oHptX) by KO71K shared under CC-BY 
[DC-15S](https://skfb.ly/6RpWC) by Marr Velz shared under CC-BY 
Nose Art Design by "Bad Mother Tattoos and Customs" Studio

Check out my page for more vehicles and other models.


Now you can also support me by following me on [Instagram](http://www.instagram.com/i_k_s_d/)

![](https://i.imgur.com/T14kGUP.jpg)

Low Altitude Assault Transport- Diorama

"The Separatist Council War Room was a secure command center located in the Klegger Corp Mining Facility on Mustafar during the Clone Wars. It was to here that the leaders of the Confederacy of Independent Systems retreated at the end of the conflict.

The war room was part of a secret command facility built onto the side of the Mustafar mining complex to act as a secure bunker for the Separatist Council. A landing pad was located outside the chamber, with a control room annex used to monitor approaching vessels. An observation balcony running the length of the war room's exterior provided a hellish view of the Mustafar mining operations far below."
Source Info  https://starwars.fandom.com/wiki

FOR EDUCATIONAL USE ONLY

Star Wars - Mustafar Control Room

The DC-17 hand blaster, also known as DC-17 blaster pistol, was a heavy blaster pistol wielded by the clone troopers of the Grand Army of the Galactic Republic during the Clone Wars. An advanced firearm, it was fielded to elite soldiers in the army, most notably Advanced Recon Commandos, clone trooper commanders, and clone jet troopers.

Info Link: https://starwars.fandom.com/wiki/DC-17_hand_blaster/Legends
I have a Patreon Join now! :https://www.patreon.com/user?u=14434838

Dc-17 Hand Blaster (Star Wars)

**Product Description:**
 Product Compatible with : 3Dsmax, Maya, Blender, Iclone 8 and CC4, Unity, UE5,    Nvidia Omniverse, Marmoset Toolbag …vv
Format file:
* FBX -  All motion
* Textures: PBR-4K (4096x4096) Diffuse, Normal, Opacity
* Motions-12:Call,Call2,Die,Eat,Eat2,Eat3,Fly,Hit,Idle,Idle2,Walk,Walkback
* Need technical support, please contact:
* Email: duong241.1982@gmail.com
Thank you for giving me the opportunity to bring joy and excitement to your lives through our products.

Robin_ Bird

a Chibi goat made for VRChat, Free!!!!

Sweat sweat little Goat
Her name is Pawp Ais, which is like a Pop Ice... or an Ice Cream.
has soft color and pattern like an Ice Cream

The avatar works on Desktop and Quest

Fully body tracking ready

Comes with GoGo Loco

Clothing Variant and Custom Machette like Free Fire had ( Grabable )

You can get it the file (Blender and SPP files) for free on my Gumroad Sites

Or... you can [Clone](https://vrchat.com/home/avatar/avtr_3109f3bd-c3ed-4a37-8596-692fbe4ec6fe) the avatar.

[VRChat] Pawp Ais, Free

Dark humor!
Cloning is a technique that uses vectors, often viruses or plasmids, to replicate genes or cells. For example, a fragment of DNA can be linked to a chromosome of a bacterial virus, allowing human DNA to be amplified by generating millions of copies in a single day. Cloning vectors, such as the pBR322 plasmid, are used to insert genes into host cells, usually bacteria like Escherichia coli, and transform them into colonies of cells containing the gene of interest. This process is fundamental to genetic engineering and allows the creation of clones of organisms, which has scientific and ethical implications. Here in this pharmaceutical laboratory, "Phage T4" viruses are bred and formatted, then reduced to a size of 200 nm long and 80 to 100 nm wide, ready to be injected by our dear practitioners concerned about our health. Viruses that will allow complete control of humankind, driven by the 6G of HAARP, what a wonderful future!

Virus Manufacturing-Phage T4

The model is created in CC 5 motion, Iclone 8 is added, use it.

Jb Jazzy

After pledging himself to the dark side under the influence of Palpatine, Anakin Skywalker becomes something colder, sharper—no longer the conflicted hero of the Clone Wars, but a man consumed by fear and fury. On the burning world of Mustafar, rivers of lava mirror the chaos within him as he duels his former master, Obi-Wan Kenobi.

His golden Sith eyes burn with conviction and desperation; he believes he is saving the galaxy—and Padmé—from betrayal and loss. Every strike of his blade is fueled by wounded pride and a twisted sense of righteousness. Yet beneath the rage lingers the tragic truth: Anakin is still fighting for love, but in choosing power over trust, he has already lost everything...

SWJA Movie Duels: Darth Vader(Mustafar Duel)

Boba Fett, a feared bounty hunter in the galaxy, emerges as a skilled and relentless figure during the rise of the Galactic Empire. Cloned from the renowned Mandalorian Jango Fett, he inherits both his father’s combat prowess and his distinctive armor. Orphaned as a child when Jango is killed, Boba carves a path through the criminal underworld, taking on dangerous assignments with unwavering precision. Known for his cold efficiency, he navigates a galaxy of shifting alliances, tracking targets across star systems. His reputation grows as someone who never fails to complete a contract, earning both fear and respect from allies and enemies alike. Despite his merciless exterior, hints of loyalty and personal code occasionally surface, setting him apart from typical hunters

资源库

关于这些资源