an update of my GT-R GT

+ liveries & double canards

uv map included

also thx for cylinder_six (instagram) for the inspiration of the livery

https://www.instagram.com/p/C5Fey0xM540/?hl=en

Nissan GT-R R35 GT V2

A generic three cylinder motorcycle based on the FZ-09/MT09 from Yamaha. It also has an aftermarket headlight inspired by the Motodemic series of headlights. The model is all quads, and is designed to be subdivideable.

The point of the model was to test Blender and see what it's like modeling something that I've modeled before. I've created bikes in Cinema 4D, Maya, and now Blender.

Three Cylinder Naked Street Bike

The 8.0-litre W16-cylinder engine with 1,850 PS and 1,850 Nm of torque is at its heart. Bugatti has designed the drive specifically for use on the race track, and has optimized it in particular for higher engine speeds. For a start, both intake and exhausts systems were de-throttled to obtain a more spontaneous response, while four newly developed turbochargers build up more boost pressure and power at higher engine speeds. In order to cope with the extremely high centrifugal forces the whole dry sump lubrication system was redesigned, bringing also weight saving benefits. The cooling system is new as well, from the air-to-air intercooling for the engine (instead of water-to-air), to the carbon-titanium turbofan radial compressors to ventilate and cool the high-performance racing brake system.

[https://www.bugatti.com/models/bolide/](http://)

Bugatti Bolide 2024

The BMW E30 is the second generation of BMW 3 Series, which was produced from 1982 to 1994 and replaced the E21 3 Series. The model range included 2-door coupe and convertible body styles, as well as being the first 3 Series to be produced in 4-door sedan and wagon/estate body styles. It was powered by four-cylinder petrol, six-cylinder petrol and six-cylinder diesel engines, the latter a first for the 3 Series. The E30 325iX model was the first BMW to have all-wheel drive.

The first BMW M3 model was built on the E30 platform and was powered by the high-revving BMW S14 four-cylinder petrol engine, which produced 175 kW (235 bhp) in its final iteration. The BMW Z1 roadster was also based on the E30 platform. Following the launch of the E36 3 Series in 1990, the E30 began to be phased out.

Low Poly Car - BMW E30 1985 White

* **Я принимаю заказы! Если вы хотите заказать у меня 3Д модель, обращайтесь ко мне во Вконтакте в сообщения сообщества - https://vk.com/lexyc3d (Доступно только владельцам российских платёжных систем)**

* In 2000, BMW redefined its super sports coupe, the M3 by placing a 3.2-liter DOHC inline-6 under its hood. Based on the E46 3 Series that underwent a full model change in 1998, the new M3 pumped out a fierce 338 HP at 7900 rpm and a hearty 269.0 lb-ft of torque at 4900. This meant that this amazing machine achieved more than 99 HP per liter when the six cylinder spun to its 7900-rpm redline. What really brought the motor to life was the M3's new gearbox. Initially, it came equipped with a Getrag 6-speed manual, but later BMW added the SMG II, the company's prize two-pedal (twin clutch) semi automatic transmission.

* **Additional file formats:**
  
**.blend -** https://drive.google.com/file/d/1DRzlQdq2Df9INCyXuRieylDWBl_WxjpJ/view?usp=drive_link

BMW M3 E46

Basic cylinder out of Cinema4D, 50cm x 200cm, 4 height segments, 32 rotation segments, no material. 
Exported as Collada 1.4 (1.5 caused errors on Sketchfab) with Export 2D Geomtry enabled, Export Animation disabled, Export Triangles disabled

Cylinder

Dimensions: 4,709-4,824 mm L x 1,827-1,828 mm W x 1,435-1,508 mm H
Fuel economy: 14-20 km/l combined
Horsepower: 140 to 190 kW
Curb weight: 1,525 to 1,655 kg
Engine: 2.0 L 4-cylinder, 2.0 L 4-cylinder diesel

BMW-3 Car Demo

My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

Credit [kadir kandemir]
The Toyota GR Supra GT300 isn’t a car — it’s a ballistic missile in a Toyota costume. Built for Japan’s Super GT, it ditches the road car’s charm for raw, ruthless speed. The body? All carbon. The engine? A race-tuned four-cylinder turbo that sounds like it’s screaming for blood.

TOM’S and Toyota turned the Supra into a downforce-obsessed beast, with wings big enough to generate their own weather system. It corners like it's defying physics, brakes like it hates speed, and exists solely to humiliate other race cars on the track.

ToyotaGR Supra GT300 | www.vecarz.com

Repositorio de modelos 3D de Ddiaz Design

![](https://i.pinimg.com/originals/79/f8/19/79f819d83daef1843134d9db2a6ccef1.jpg)

The Volkswagen Golf GTI was unveiled in 1975 at the Frankfurt Motor Show. The UK market had to wait a further two years for vehicles to arrive - 1977 saw 34 examples, all of them left hand drive, sold in the GTI's first tentative year.

The GTI was powered by a 1,588 cc four cylinder engine with K-Jetronic fuel injection it developed 110 PS at 6,100 rpm and 103 lbs ft of torque at 5,000 rpm. This allowed the GTI, which weighed 810 kg unladen, to hit 60 mph from standstill in nine-seconds before reaching a top speed of 110 mph.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a Need For Speed Heat 3d model

Credits: https://www.facebook.com/p/GM25-100042237200164/

1976 Volkswagen Golf GTI Mk1

# IRON HOWL V8

The power of the past — the speed of the future.
A steel beast born from the spirit of the ’70s, now roaring on the track with the force of an eight-cylinder heart.

Inspired by the legends of muscle cars, built for those who fear no roar.
Iron Howl V8 — when the road belongs only to you.

---
![](https://cdnb.artstation.com/p/assets/images/images/091/206/715/large/igor-oskolskiy-4.jpg?1756146596)
![](https://cdnb.artstation.com/p/assets/images/images/091/206/719/large/igor-oskolskiy-5.jpg?1756146602)
![](https://cdna.artstation.com/p/assets/images/images/091/206/838/large/igor-oskolskiy-6.jpg?1756146827)

---

The model is based on one of [Andrey Tkachenko](https://www.artstation.com/atdesign) works. 
I hope you enjoy this work 🙂

IRON HOWL V8

Shot in my neightborhood in Brooklyn. Looks like it's an [MG MGB](https://en.wikipedia.org/wiki/MG_MGB): a two-door sports car manufactured and marketed by the British Motor Corporation (BMC), later British Leyland, as a four-cylinder, soft-top roadster from 1962 until 1980.

Can you spot the easter egg?

MG MGB sports car

. It is available in both Coupe (G82) and Convertible (G83) body styles 
. The M4 G82 is powered by BMW's S58 engine, which is a twin-turbocharged 3.0L inline-six engine 
. It can be equipped with either a 6-speed manual or an 8-speed automatic transmission.


The M4 G82 is known for its powerful performance and dynamic driving experience. The top-of-the-line BMW M4 Competition Coupe with M xDrive delivers an impressive 390 kW (530 hp) thanks to the High-Performance M TwinPower Turbo inline 6-cylinder petrol engine
. It offers maximum driving dynamics both on the racetrack and in day-to-day driving 
The M4 G82 has received positive reviews for its performance and handling. It has been praised for its improved responsiveness and the smoothness of its gear shifts 
. The steering wheel-mounted paddles are also well-regarded for their feel and functionality

BMW M4 G82 Coupe ( Free + High-Detail )

The 2JZ-GE is a six cylinders engine from the Toyota Supra N/A or Lexus IS300
Displacement : 3L
Cylinders : 6
DOHC
no VVTI

The Blend file is animated

2JZ-GE Engine

**Royal Enfield** is an Indian motorcycle manufacturing brand with the tag of "the oldest global motorcycle brand in continuous production" manufactured in factories in Chennai in **India**. Licensed from Royal Enfield by the indigenous Indian Madras Motors, it is now a subsidiary of Eicher Motors Limited, an Indian **automaker**. The company makes the Royal Enfield Bullet, and other single-cylinder and twin-cylinder **motorcycles**.

The Royal Enfiled Bike was 3D Scanned at **Addere Creations**.

Details: Stromrider Sand Royal Enfield Classic model.

3D Scan Process: **Outdoor Photogrammetry**

Number of Photos: 95

Software: Autodesk Recap Photo

Camera used: Mobile Phone

Bike - Royal Enfield

Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

Follow me on Instagram: @rpresttes

Hollow cylinder
For those who just want a medium cylinder that has no padding, because I searched for several sites and I didn't find one like that.
Most had padding, or rounded edges, and what most resembled it was a wedding ring and that was not what I needed.

Hollow Cylinder

Ford produced three cars between 1932 and 1934: the Model B, the Model 18, and the Model 46. These succeeded the Model A. The Model B had an updated four cylinder and was available from 1932 to 1934. The V8 was available in the Model 18 in 1932, and in the Model 46 in 1933 & 1934. The 18 was the first Ford fitted with the flathead V‑8. The company also replaced the Model AA truck with the Model BB, available with either the four- or eight-cylinder engine.. 
references: https://en.wikipedia.org/wiki/1932_Ford
                     https://auto.howstuffworks.com/1932-ford-models-b-and-18.htm

Ford Model B Pickup (1932)

The P6 ATAV is a light strike vehicle manufactured by PT Sentra Surya Ekajaya (SSE Defense). The P6 first appeared in public at the Indo Defense 2016 exhibition. The P6 is classified as a rantis (tactical vehicle) by the TNI.

For dimensions, the P6 ATAV is 4.6 m long, 2.3 m wide and 1.5 m high. For the engine, it uses a 4-cylinder turbo diesel engine with a capacity of 2300 cc. Its power is 142 HP at 3400 RPM. Just like the Flyer, the engine is placed at the back. As an off-road vehicle, the P6 uses independent suspension and a winch at the front. Despite being lightly armored, the P6 uses run flat tires and an automatic transmission. On a full fuel tank (120 litres), the P6 can travel 500 km and reach a speed of 120 km/h.

Model In Blender 2.9 Textured in Substance painter

P6-ATAV

A reference for those learning to draw in perspective

Cylinder Transparent Artistic Reference

You can see it running [Here on Youtube](https://www.youtube.com/watch?v=-a7MpJx4nnI).

All the files needed to print it can be found [here on the MakerWorld](https://makerworld.com/ru/models/1949605-balloon-powered-oscillating-cylinder-motor#profileId-2094728).

Apart from those, you'll need:

* Fingers from nitrile or PET glove for the membranes

* Bolts: M3x6 x9, M3x8(or 10) x2, m3x14 x2, m3x10(or longer) x2, m3x26 x1

* M3 nuts x4

![](https://i.imgur.com/HkXQHek.jpg)
![](https://i.imgur.com/tBTVk6y.jpg)

Oscillating Cylinder Motor for LEGO (3d Print)

Ready to be subdivided, the engine from my Generic Triple motorcycle. I tried to cut the vent hoses and cables at a spot where it should be pretty easy to integrate into your project.

If you end up using it, please do post back and let us know how!

Three Cylinder Motorcycle Engine

A 3d reference for artists learning to draw in perspective

Cylinder Transparent (Tall) artistic reference

Greetings! This is a simulation of a V6 engine, with a cylinder bank angle of 90 degrees and a lower position of the camshaft.
This model includes a comprehensive set of internal components that accurately represent the technical features of an actual engine. However, it does contain simplifications and discrepancies from real-world physical processes, as this is a gaming resource for my project.
In addition, the model includes an additional set of textures, which you can view here: and get here: https://skfb.ly/pDzry
If you have a suggestion for cooperation: Telegram https://t.me/przheva.

资源库

关于这些资源