Portal

A viaduct arch where Millstream Road passes under the London Bridge to Greenwich railway off Druid Street, Southwark, London.

1493 photos taken in Janaury 2022 with a Sony a7R III and processed in Reality Capture.
Thank you to Dr Peter Jones for directing me toward this and nearby arches.

Millstream Road Viaduct

This is all that remains today of the old Baltimore Traction Company cable car powerhouse on Druid Hill Ave. It was built to help transport passengers from "...Druid Hill Park to Patterson Park in 1891 using underground steel cables (similar to the system still operating in San Francisco today). The cables were powered by steam engines in nearby warehouses."

-[Maryland Center for History and Culture](https://www.mdhistory.org/lost-city-baltimores-trolleys-trackless-trolleys-and-buses/) 

Created in RealityCapture from 1391 images taken with a Nikon D750 and drone.

Baltimore Traction Co.

**As the wind of progression blew over the Viking settlement of Novgorod, Christianty quickly filled the minds and hearts of the town folk. Pagan traditions were banished and pactitioners such as druids and seeresses faced endless ridicule, exile and often worse. As was the fate of the misfurtonate seeress Ganna, when she was roughly evicted out of the city, robbed of possessions, family, and dignity. Ganna swore of mankind and settled on top of a tall hill, far from - but always overlooking mankind that wronged her so. Desperation and loneliness quickly drove her cursed soul mad and she sought friendship and connection to the crows that never left her side. Still practicing dark magic she potters around the hill of Ganna daily, feeding the birds, catching fish and writing down everything she knows in scrolls and books in hopes that one day, someone will read them, will connect again, will accept again. But until that day, her birds will have to suffice.**

Created in 3dsmax and photoshop.

Home of an Exiled Seeress

One of my favorite places in Baltimore! It was designed by George A. Frederick (1842–1924) and is located in Druid Hill Park. 

"Established in 1888 as the Druid Hill Conservatory, the Howard P. Rawlings Conservatory has grown from the original Palm House and Orchid Room to include three greenhouses, two display pavilions and outdoor gardens...The Conservatory is the second-oldest steel framed-and-glass building still in use in the United States."

-[The Howard P. Rawlings Conservatory's Website](https://rawlingsconservatory.org/history/)

Created using 2036 images taken with a drone and processed in Metashape.

Howard Peter Rawlings Conservatory

DAE DEEPEST LORE

"In a lush, enchanted forest, where magic whispered in the breeze, lived , a bright-eyed druid apprentice. Eager to weave spells of joy, she roamed the ancient woods, dreaming of delight.

One day, beneath a gnarled old tree, She discovered an ancient tome of druidic secrets. Reading through its brittle pages, her eyes sparkled with glee at the spell for "Tomates Felicitatus" – tomatoes that could turn frowns into laughter.. use with caution."

DAE Crib - "Enchanted Nook"

Deer Druid

Just some hammer that was deleted from here but im returned it for my portfolio

Druidic hammer

Very dangerous sword of ancient druids ! 
Model was created in blender . Fbx format . 

You can free download it

Bloody Rose Sword | FREE

, insan gibi görünen sma tam olarak hiçbir dünyaya ait olmayan bir Invoker / Planar Scholar’dır. Tüm boyutlarda farklı versiyonları vardır ve o, bu versiyonların yankılarını kullanabilen merkez bilinçtir. Yanında her zaman yaşayan sayfalara sahip  gerektiğinde kendi alternatif versiyonlarını kısa süreliğine çağırabilir, ancak bu güçler zihnini parçalama riski taşır. Sessiz, analitik ve derin bir karakterdir; dışarıdan duygusuz görünse de aslında yalnızdır çünkü hiçbir gerçekliğe tam ait değildir.  diğer karakterlerle bağ kurar: dışlanmış ork druid ile ortak bir yalnızlık hissi paylaşır, somut ve gerçekçi dwarf ile zıt ama tamamlayıcı bir ilişki var, bard ise onun gizemli doğasını şarkılara taşır. En büyük sırrı ise kendisinin orijinal versiyon olmamasıdır; gerçek ilk hali çoktan yok olmuş, o ise sadece var olmayı  stabil yankıdır.

Meshy_AI_ Aurelian_0405041635_texture

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/ugC2HH](https://www.meshy.ai/s/ugC2HH)

Druid Staff

The recent discovery of ancient rock art in parts of the Peak District has brought about a new project to study these finds. As a volunteer with the Peak Park Cultural Heritage Team, I have been asked to carry out drone surveys of the sites. This is my first one, using my smallest drone - a DJI Mini 2 - which enabled me to get into the tight spaces surrounding this rock.  More information on the project can be found here: https://www.bradshawfoundation.com/british_isles_prehistory_archive/peak_district_national_park/index.php

Druid Stone, Rowtor Rocks, Peak District

One of my new miniatures that should be coming out tomorrow.

3D Print of new Druid model Coming out tomorrow Excited!

Orc Berserker - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Unleash sheer fury upon your tabletop with this towering Orc Berserker. Roaring with savage bloodlust and raising twin axes high above its head, this muscular brute is ready to carve through your party's front lines. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer  to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.    👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.    Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the Axes and hair. Take your time when removing supports! 

Orc Berserker - 32mm

 Orc Hunter - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Stalk your adventurers through the wilderness with this cunning Orc Hunter. Crouched low in the brush and taking careful aim with a feathered blowpipe, this eagle-eyed tracker is poised for a silent, deadly strike. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the the blow gun and feathers. Take your time when removing supports! 

Orc Hunter - 32mm

Orc Rogue - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Bring lethal stealth to your next encounter with the elusive Orc Rogue. Hidden beneath a tattered hood and lunging forward with twin daggers drawn, this vicious assassin is perfectly posed for a devastating sneak attack. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the knives and cape. Take your time when removing supports! 

Orc Rogue - 32mm

On the night of June 20th, 2020, a statue of George Washington at Druid Hill Park in Baltimore was covered with red house paint and white graffiti.

George Washington statue at Druid Hill Park

Recent work 04.03.2026

I modeled the face of a friend and gave him the body of a druid

Druidpap

**game: Asterix & Obelix XXL**

Getafix (or, in some translations, Magigamix, French: Panoramix) is the tritagonist of the Asterix franchise. He is the village druid.

**biography**

Although known for his strength-enhancing magic potion, he has many other magical and medicinal potions at his disposal, and acts as the village doctor and occasionally teacher. Asterix (and most other villagers) will consult him whenever anything strange occurs. He does not himself normally engage in combat, whereas most of the villagers enjoy a good punch-up (even with each other). On one occasion in one of the stories explaining Gaulish women, with using Mrs. Geriatrix as an example, with a fight sparked by Impedimenta. The final cut is shown with all the male villagers and two females, Impedimenta and Bacteria included, with Getafix running to stop the punch up, with a piece of fish flying towards him.

Getafix

This model was generated using Meshy(https://www.meshy.ai)'s AI toolkit. It provides tools that effortlessly turn human imagination into stunning 3D models.

If you're interested in this model, visit the model page on Meshy to explore more about it: [https://www.meshy.ai/3d-models/Minifigure-Antlered-Druid-of-the-Emerald-Flame-v2-019d6889-c94f-77f9-b69b-a88a4b207446?utm_source=sketchfab](https://www.meshy.ai/3d-models/Minifigure-Antlered-Druid-of-the-Emerald-Flame-v2-019d6889-c94f-77f9-b69b-a88a4b207446?utm_source=sketchfab)

Minifigure- Antlered Druid of the Emerald Flame

Fantasy-style model with organic shapes and clear silhouette. Suitable for RPGs, games, renders, and magical characters such as mages or druids.

Category: Fantasy / Mystic
Use: Games, renders, magical scenes

资源库

关于这些资源