Simple, small, Hello Kitty model I made for people to 3D print :) 
Very small size which makes it's great for using as a test print. 
All done in Fusion 360 using t-spline bodies.

Hello Kitty

Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

This is a custom 3D model of the Yamaha 500s parrallel twin, modeled in blender and fusion 360. Textured in substance painter with lighting baking and refelection baking

Yamaha 500 custom motorbike

Porsche 959 modeled in fusion 360 and textured in substance painter, using freely avalible automotive materials

Porsche 959

A quick personal exploration into aerospace design and hard surface modeling.

This project was an exercise in rapid concept-to-render workflow. The entire vehicle and its launch infrastructure were designed and modeled in just 2 hours using Autodesk Fusion 360, focusing on clean parametric modeling and functional shapes.

You can move everything you want in this 3D model.

Rocket and Launch Pad

Emp_Grenades

these are wing sections for the F-16 avatar gadget for VRChat made in fusion 360 of autodesk for vehicle shaped avatar gadgets.

F-16 wing sections.

this is for the F-16 avatar gadget for VR related platforms and for VRChat as i develop this idea for everyone, these are made with fusion 360 from autodesk.

F-16 fuselage and wing sections.

these are the Fuselage Sections of the F-16 Fighting Falcon made in Fusion 360 from autodesk for the F-16 Avatar Gadget.

Fuselage Sections for the F-16 Avatar Gadget

**Coffee Showcase**


![](http://i.postimg.cc/Mp83NZjB/Vitrina-v25.png)

Created and rendered in Fusion 360

Coffee Showcase

The M4 Carbine is a 5.56×45mm NATO, air-cooled, gas-operated, direct impingement, magazine-fed carbine. It has a 14.5 in (370 mm) barrel and a telescoping stock. It is essentially a lighter and shorter variant of the M16A2 assault rifle.

This model was created in fusion 360, The model has uvs and textures applied, The model is high poly and The textures was created in substance painter, The model is custom built not fully based on the m4, The model uvs was created in 3ds max. The low poly game version, i will upload soon. 

Please leave a like and subscribe for more models coming soon.

m4 Carbine Rifle

# **** Pool table

Softwares: Fusion 360, Blender & substance painter

This model is low poly and game ready, The textures is 2048x2048, The model has one material. 

Please leave a like and subscribe for more models coming soon!

Pool Table

Long time no see. It's has been over 6 months since i last uploaded anything to Sketchfab. This was pretty fast project, from start to end it took about 3-4 hours. I made the high poly details using Fusion 360 and the low poly model was made with 3Ds Max. Textures was made with Materialize and Substance painter.

Can of beans

# ****Golden Crown

This model was created with blender and fusion 360. The model is low poly, The high poly was baked onto the low poly model, The textures was created with substance painter. The textures is 2048x2048.

Please leave a like and subscribe for more models coming soon!

Golden crown

This is a precise 3D model of a Fusion 360-designed extruder bracket for a 3D printer, specifically modeled for F410-style printer configurations.

The bracket is designed to securely mount and support the extruder assembly, ensuring stability, alignment, and efficient filament feeding during printing operations.

Created with a focus on functional design and manufacturability, this model is ideal for:

🖨️ 3D printing and prototyping
⚙️ Mechanical design and CAD reference
🧩 DIY printer modifications and upgrades
🎓 Educational projects and engineering learning
🎮 Integration into simulation or visualization workflows

Fusion3_F410_3D_Printer_EXTRUDER_BRACKET

![](https://cdnb.artstation.com/p/assets/images/images/045/822/139/large/vertex-monster-death-machine-2022-1920x816.jpg?1643637713http://)
Designed and modeled with Autodesk Fusion 360.

Enjoy!

Follow me on:

**YouTube:**

https://www.youtube.com/vertexmonster

**Instagram:**

https://www.instagram.com/vertexmonster

**Artstation:**

https://www.artstation.com/vertexmonster

Mechanical Spider

Emp_Grenades_Box

Un modelo sencillo de teclado hecho en fusion 360.

Medida estandar de un teclado alfanumerico 44cm*15cm.

资源库

关于这些资源