You can see it running [Here on Youtube](https://www.youtube.com/watch?v=-a7MpJx4nnI).

All the files needed to print it can be found [here on the MakerWorld](https://makerworld.com/ru/models/1949605-balloon-powered-oscillating-cylinder-motor#profileId-2094728).

Apart from those, you'll need:

* Fingers from nitrile or PET glove for the membranes

* Bolts: M3x6 x9, M3x8(or 10) x2, m3x14 x2, m3x10(or longer) x2, m3x26 x1

* M3 nuts x4

![](https://i.imgur.com/HkXQHek.jpg)
![](https://i.imgur.com/tBTVk6y.jpg)

Oscillating Cylinder Motor for LEGO (3d Print)

A simplified version of [this little van](https://skfb.ly/6W9wB).

.STL files can be downloaded [here on the MakerWorld](https://makerworld.com/ru/models/1756325-construction-toy-piggy-van-jr#profileId-1900259).

![](https://i.imgur.com/aWYFYfm.jpg)
![](https://i.imgur.com/QAJWhgS.jpg)
![](https://i.imgur.com/w4GnOTW.jpg)

Piggy Van Junior (3d Print)

**This one is for free!!!!!!!**

As of early 2026, the People’s Liberation Army Navy (PLAN) operates three aircraft carriers: the commissioned Type 001 Liaoning, the Type 002 Shandong (both ski-jump, conventional), and the advanced Type 003 Fujian (electromagnetic catapult, conventional), with a fourth, potentially nuclear-powered carrier, in development. The Fujian, which joined the fleet in late 2025, significantly enhances China's power projection capabilities.


If you would like to 3D Print, please download it in here.
https://makerworld.com/zh/models/2474146-chinese-aircraft-carrier#profileId-2716725

Suggested size is 1:2000(500%), 1:3000(333.3%) or 1:5000 (200%)

Visit my website to check out my other models.
businessyuen.com

Thank you for your support!!!

Chinese Aircraft Carrier

https://makerworld.com/en/models/80088-the-neverending-story-a-futuristic-tale#profileId-111520

chris_vienna's Falkor

READY TO 3D PRINT! You can download this high-poly model directly from MakerWorld under my profile: Elbichomartinez.

This enclosure is fully optimized for 3D printing, featuring high-quality geometry for a professional, smooth finish. No extra adjustments needed—just download and print.

High-Poly Arduino 1 Case

Orc Berserker - Print-Ready Miniature by Mike Gyver Minis! ⚔️? Unleash sheer fury upon your tabletop with this towering Orc Berserker. Roaring with savage bloodlust and raising twin axes high above its head, this muscular brute is ready to carve through your party's front lines. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ? ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer  to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.    ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.    Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ? ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the Axes and hair. Take your time when removing supports! 

Orc Berserker - 32mm

 Orc Hunter - Print-Ready Miniature by Mike Gyver Minis! ⚔️? Stalk your adventurers through the wilderness with this cunning Orc Hunter. Crouched low in the brush and taking careful aim with a feathered blowpipe, this eagle-eyed tracker is poised for a silent, deadly strike. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ? ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ? ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the the blow gun and feathers. Take your time when removing supports! 

Orc Hunter - 32mm

Orc Rogue - Print-Ready Miniature by Mike Gyver Minis! ⚔️? Bring lethal stealth to your next encounter with the elusive Orc Rogue. Hidden beneath a tattered hood and lunging forward with twin daggers drawn, this vicious assassin is perfectly posed for a devastating sneak attack. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ? ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ? ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the knives and cape. Take your time when removing supports! 

Orc Rogue - 32mm

Goblin Warrior - Print-Ready Miniature by Mike Gyver Minis! ⚔️? This vicious Goblin Warrior is captured mid-swing, brandishing a massive spiked club and ready to wreak havoc in your next encounter. Detailed with scavenged armor and a menacing snarl, it’s the perfect addition to any tabletop horde.   Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?  ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis   ⭐ Why Mike Gyver Minis? ⭐ ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis   ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around Club and around the hip with the stick. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of. 

Goblin Warrior - 32mm

Goblin Rogue - Print-Ready Miniature by Mike Gyver Minis! ⚔️? This cunning Goblin Rogue is crouched low and ready to strike, dual-wielding jagged daggers for a lethal sneak attack. A perfect vicious addition to your next tabletop encounter or stealthy dungeon crawl.  Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?   ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis   ⭐ Why Mike Gyver Minis? ⭐    ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis     ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around Daggers and the keys in the front. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of 

Goblin Rogue - 32mm

Goblin Mage - Print-Ready Miniature by Mike Gyver Minis! ⚔️?  This vicious Goblin Mage stands poised in a dynamic casting stance, wielding a gnarled staff while channeling crackling arcane energy from its outstretched hand. It is the perfect blend of cunning and chaotic power to challenge any adventuring party.   Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?   ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis   ⭐ Why Mike Gyver Minis? ⭐  ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis     ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around around the magic effect and staff. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of 

Goblin Mage - 32mm

Goblin Archer - Print-Ready Miniature by Mike Gyver Minis! ⚔️?  Bring chaos to your tabletop with this vicious Goblin Archer, expertly posed mid-draw as it prepares to loose a notched arrow from the shadows. This cunning miniature captures every jagged detail of its primitive gear, making it the perfect low-level threat for your next forest ambush.   Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?   ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis    ⭐ Why Mike Gyver Minis? ⭐   ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis   ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around Bow and Dagger. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of 

Goblin Archer - 32mm

Goblin Tinkerer - Print-Ready Miniature by Mike Gyver Minis! ⚔️?  This cunning Goblin Tinkerer is ready to wreak havoc on your tabletop, equipped with a massive, jury-rigged backpack and a volatile hand-cannon. It’s the perfect blend of chaotic engineering and vicious intent, captured in a highly detailed pose for your next encounter.   Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?   ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis   ⭐ Why Mike Gyver Minis? ⭐   ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis     ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around Mechanical Claw and Blunderbuss. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of 

Goblin Tinkerer - 32mm

Goblin Sapper - Print-Ready Miniature by Mike Gyver Minis! ⚔️?  Bring explosive chaos to your next encounter with this cunning Goblin Sapper, frozen in a tense crouch as he prepares to hurl a lit bomb into the fray. This highly detailed 32mm miniature perfectly captures the reckless, volatile energy of a demolitionist ready to turn the tide of battle—or go out in a blaze of glory.   Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ?   ⚔️ Expand Your Sessions Looking for other high quality miniatures, terrain or chibi decor? ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis  ⭐ Why Mike Gyver Minis? ⭐   ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/@MikeGyverMinis   ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis. You may: Print this file for yourself, your friends, or for gaming sessions.You may NOT: Sell the physical prints, sell the digital files, or distribute the files.Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis   Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ?   ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential.Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around bomb wick and cap wings. Take your time when removing supports! Cube: Some miniatures have a cube underneath. This cube is only for helping print the miniature and can be disposed of 

Goblin Sapper - 32mm

Fake Poo (Voted For On Makerworld)

You can see it in action [here on Youtube](https://youtu.be/_FDZzKAFSz4),

and all the .stl files can be downloaded [here on the MakerWorld](https://makerworld.com/ru/models/1801690-balloon-powered-radial-engine#profileId-1921348). 

Can be powered by a balloon, or just by blowing air into it. Used in this [little toy car](https://skfb.ly/6LV6D).


![](https://i.imgur.com/JHsGiUt.jpg)
![](https://i.imgur.com/iaMC1VM.jpg)

Just a few of extra parts needed for the assembly:

* 3x nitrile glove fingers (blue part)
* 15x M3x8 bolts
* 2x M3x12 (or longer) bolts
* 17x M3 nuts

3d Printable Radial Pneumatic Engine

I recreated the A1 Mini printer because I wanted to use it in an animation and I’m a big fan of its design.
Since I don’t own the printer, I worked purely from online reference images.
I tried to make it as accurate as possible within a reasonable timeframe.

Hope you enjoy !

Find me on Makerworld for actual 3D Prints: 
https://makerworld.com/de/@neilvfx

3D Printer - Bambu Lab A1 Mini

orginal model:https://sketchfab.com/3d-models/scp-096-sl-pro-b2341058979e4c3e86fd43e31447491e
Stand:https://makerworld.com/tr/models/807365-scp-sl-173-d-d-character-piece#profileId-748063

Compatible with Bambu Studio slicer.

资源库

关于这些资源