Scissors Roof - CC

Dish drying rack with plates bowls knives chopping board and kitchen scissors.

Drying Rack By Djh

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/eKjNGs](https://www.meshy.ai/s/eKjNGs) but is for modify with the app of printing 3D

Crown and Scissors keychain

Red-haired with Scissors

Scissors

Old Scissors

Practice molds for learning cervical dilation in obstetrics.

This model includes molds for 10cm dilation.

**Steps for creating**:

1.) Print the 3D model using PLA or any standard filament (no specific printing/infill parameters)

2.) In a ventilated area, apply a silicone mold release spray to the print (I used "SELSIL Silicone Mold Release Aerosol Spray (13.5 fl oz) https://a.co/d/044ZuOGD)

3.) Pour a 20A-30A silicone to the brim of the mold, and allow to set for the recommended amount of time, per the instructions
          *** Note: Silicone firmness is measured by the "Shore A" scale... I found that 20A-30A gives good results (example: https://a.co/d/07M2vmVo)
          
4.) Remove the silicone cervix by using pliers and slowly pulling it away from the edges... then trim off any excess edges with scissors

5.) Start learning cervical dilation!

10cm Cervical Dilation Practice Mold

Practice molds for learning cervical dilation in obstetrics.

This model includes molds for 0cm ("closed"), 0.5cm ("fingertip"), 1cm, 2cm, 3cm, 4cm, and 5cm dilation.

**Steps for creating**:

1.) Print these 3D models using PLA or any standard filament (no specific printing/infill parameters)

2.) In a ventilated area, apply a silicone mold release spray to the prints (I used "SELSIL Silicone Mold Release Aerosol Spray (13.5 fl oz) https://a.co/d/044ZuOGD)

3.) Pour a 20A-30A silicone to the brim of each mold, and allow to set for the recommended amount of time, per the instructions
          *** Note: Silicone firmness is measured by the "Shore A" scale... I found that 20A-30A gives good results (example: https://a.co/d/07M2vmVo)
          
4.) Remove the silicone cervix by using pliers and slowly pulling it away from the edges... then trim off any excess edges with scissors

5.) Start learning cervical dilation!

0-5cm Cervical Dilation Practice Molds

A low poly stationery set featuring a black metal mesh pencil cup filled with everyday office tools two red handled scissors yellow highlighters black pencils a utility knife and a white ruler. All assets are optimized for real time use with under 11K polygons total. Materials are PBR 4K with base color roughness metallic normal and opacity maps. Ideal for office scenes school environments or product visualizations. Branded under the fictional label Inkspire to ensure copyright safety.

Mesh Pencil Cup Stationery Set

Chrome Scissors. 3d PBR Model. Model is Built to Real World Scale Polygon Lowpoly and Subdivided 2048x2048 PNG format textures BaseColor Metallic Roughness Normal Opacity for transparent models

Chrome Scissors

Desktop Scissors Prop

A pair of scissors that can be used in any office.

For proper use, we recommend downloading the original file.The Converted version is intended for web viewing only. In the source file, the following are fully preserved:✔ original scene hierarchy✔ unsimplified materials✔ correct PBR texture maps✔ correct object namesIf you are going to integrate the model into a project, select the source file.Black Scissors. 3d PBR Model.

Black Scissors

Practice molds for learning cervical dilation in obstetrics.

This model includes molds for 6cm and 7cm dilation.

**Steps for creating**:

1.) Print these 3D models using PLA or any standard filament (no specific printing/infill parameters)

2.) In a ventilated area, apply a silicone mold release spray to the prints (I used "SELSIL Silicone Mold Release Aerosol Spray (13.5 fl oz) https://a.co/d/044ZuOGD)

3.) Pour a 20A-30A silicone to the brim of each mold, and allow to set for the recommended amount of time, per the instructions
          *** Note: Silicone firmness is measured by the "Shore A" scale... I found that 20A-30A gives good results (example: https://a.co/d/07M2vmVo)
          
4.) Remove the silicone cervix by using pliers and slowly pulling it away from the edges... then trim off any excess edges with scissors

5.) Start learning cervical dilation!

6-7cm Cervical Dilation Practice Molds

Alex Kidd Ossale, typically shortened to Alex Kidd, is the protagonist of the Alex Kidd series. In spite of his humanoid appearance, he is an Arian from the planet Aries, and a lost member of the Radaxian royal family. He has a love for and skill when it comes to Rock, Paper, Scissors, and had to use that skill to save his father, King Thunder. He, like many of his race, is skilled in the martial art Shellcore, which allows him to enlarge and toughen his fists at will. This allows him the power to break boulders with his bare hands. In addition, he appears quite skilled with driving a multitude of vehicles, from his trademark Sukopako Motorcycle to the pedal-powered Peticopter.

Alex Kidd

Proposed Dwelling Scissors

Practice molds for learning cervical dilation in obstetrics.

This model includes molds for 9cm dilation.

**Steps for creating**:

1.) Print the 3D model using PLA or any standard filament (no specific printing/infill parameters)

2.) In a ventilated area, apply a silicone mold release spray to the print (I used "SELSIL Silicone Mold Release Aerosol Spray (13.5 fl oz) https://a.co/d/044ZuOGD)

3.) Pour a 20A-30A silicone to the brim of the mold, and allow to set for the recommended amount of time, per the instructions
          *** Note: Silicone firmness is measured by the "Shore A" scale... I found that 20A-30A gives good results (example: https://a.co/d/07M2vmVo)
          
4.) Remove the silicone cervix by using pliers and slowly pulling it away from the edges... then trim off any excess edges with scissors

5.) Start learning cervical dilation!

9cm Cervical Dilation Practice Mold

Practice molds for learning cervical dilation in obstetrics.

This model includes molds for 8cm dilation.

**Steps for creating**:

1.) Print the 3D model using PLA or any standard filament (no specific printing/infill parameters)

2.) In a ventilated area, apply a silicone mold release spray to the print (I used "SELSIL Silicone Mold Release Aerosol Spray (13.5 fl oz) https://a.co/d/044ZuOGD)

3.) Pour a 20A-30A silicone to the brim of the mold, and allow to set for the recommended amount of time, per the instructions
          *** Note: Silicone firmness is measured by the "Shore A" scale... I found that 20A-30A gives good results (example: https://a.co/d/07M2vmVo)
          
4.) Remove the silicone cervix by using pliers and slowly pulling it away from the edges... then trim off any excess edges with scissors

5.) Start learning cervical dilation!

8cm Cervical Dilation Practice Mold

This scissors is made of:
> - 4682 vertices
- 9392 edges
- 4712 faces

It is a single mesh

stationery paper scissors that you can use to decorate your interior

Office Paper Scissors

For full functionality, we recommend downloading the Original format.The Converted version is intended for web viewing only. In the source file, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ accurate texture maps✔ proper object namingIf you plan to use this model in production, download the source file.Stylized school supplies set including books notebooks pens pencils markers paints pencil cases scissors and other stationery. Perfect for creating scenes in school office or creative environments

Stylized School Supplies

Scissors with black ergonomic handle for right handed

For complete workflow compatibility, we recommend downloading the original file.The Converted version is intended only for use in the web viewer. In the Original format, the following are fully preserved:✔ original scene hierarchy✔ all materials without simplification✔ accurate texture maps✔ proper object namingIf you are going to integrate the model into a project, download the original version.Red Scissors. 3d PBR Model.

资源库

关于这些资源