A plastered human skull; the skull was taken as the base and the features of the face were modelled on it in plaster. One eye is made from a bivalve shell divided in two. The other has one, smaller, complete shell in place and is missing its twin.

Culture/period: Pre-Pottery Neolithic B (8500 BC- 6000BC)

* Height: 17 centimetres 
* Width: 14.6 centimetres 
* Depth: 18 centimetres 
* Weight: 3.4 kilograms

Collection online record: http://bit.ly/jerichoSkull3D

Google Cultural Institute: https://www.google.com/culturalinstitute/beta/asset/swH1nFuqOHaDLQ

Created from 138 photographs (Nikon D5100/ OnePlus3 mobile) and Photoscan by Daniel Pett.
[![ORCiD](https://img.shields.io/badge/ORCiD-0000--0002--0246--2335-green.svg)](http://orcid.org/0000-0002-0246-2335)
[![DOI](https://zenodo.org/badge/83538689.svg)](https://zenodo.org/badge/latestdoi/83538689)

The Jericho Skull

Check out the [forum post](https://forum.sketchfab.com/t/final-vikings-thor-and-the-midgard-serpent/17395) for more information!

*At the end of time, when Ragnarok is coming, the serpent Jormungandr will escape its prison in the depth of the ocean. Thor, son of Odin, the all-father, is destined to fight this midgard moster. On this day, thunder will roll through the sky, the earth will sidder and waves will raise to destroy all. On this day the end of time wil come. On this day, the thunder god will die.*

After 60 hours of hard work, and dedication, the scene is finally complete. I've really pushed myself to create as much detail and variety as possible. All the weapons, and most of the shields, the characters are all different. Everything has been touched by hand In an effort to reduce automation and create a most authentic work.

I had a lot of fun making this! And I really enjoy seeing the works of others.

Thor and the Midgard Serpent

Marble portrait head from a statue of Antinous (as Dionysus?) wearing a wreath of ivy. The bust is modern.

Height 81.00cm

COL: https://www.britishmuseum.org/collection/object/G_1805-0703-97

Made from 250 photos, Nikon D5100 by Daniel Pett processed in Photoscan. This is a reasonable model, slight specularity from shine of the stone. The shadow on the right shoulder comes from the lighting in the gallery.

[![DOI](https://zenodo.org/badge/82554716.svg)](https://zenodo.org/badge/latestdoi/82554716)
[![ORCiD](https://img.shields.io/badge/ORCiD-0000--0002--0246--2335-green.svg)](http://orcid.org/0000-0002-0246-2335)

Antinous

Granodiorite squatting figure of Roy, High Priest of Amun during the reigns of Ramses II, Merenptah and Sety II, holding a Hathor-headed sistrum before, the dorsal pillar is inscribed with two vertical registers of hieroglyphs - invocations to Amun-Ra and Mut; lower section lost.

19th Dynasty, dating to circa 1220 BC. Found in Thebes, Egypt.

Height: 88 centimetres (Original) Height: 113 centimetres (Restored)

Model by Daniel Pett, made using a Nikon D5100 and Photoscan. The lighting conditions in the gallery where this is displayed make it quite hard to get a good image of the reverse.

British Museum Collection online: http://bit.ly/statueRy 

[Buy a resin cast.](http://www.britishmuseumshoponline.org/invt/cmcr60560)


[![ORCiD](https://img.shields.io/badge/ORCiD-0000--0002--0246--2335-green.svg)](http://orcid.org/0000-0002-0246-2335)
[![DOI](https://zenodo.org/badge/85835385.svg)](https://zenodo.org/badge/latestdoi/85835385)

A statue of Roy, High Priest of Amun

This is a military style building that includes several animations. Style resembles a quonset and nissen hut shape. Perfect addition for your military base, apocalypse bunker or villian's lair in your GTA/CoD type project.   

Animations include:  front door, rear garage door, front security camera, rear security camera, blast shields for front windows, and blast shields for garage door.


Feel free to use for any project. All feedback is welcome and appreciated. Check out my other models to populate your project. Thanks for checking out my stuff and the likes.

# Check out all my other models including this most recent model. 
![](http://tampajoey.com/images/Sketchfab/latest_model.jpg)

Military Style Building (with animations)

Pentelic marble well-head (puteal) decorated with four scenes of erotic pursuit: Hercules in female dress seizing Omphale, flanked on the left by a vase and on the right by a flying Cupid holding a sceptre; a female figure struggling with a male, thought to resemble Hercules; a female figure seized by a young satyr carrying a wineskin...
COL: [GAA8749](https://www.britishmuseum.org/collection/object/G_1805-0703-227)

Diameter: 84 cm Height: 81.9cm

144 photographs, Nikon D5100, Agisoft Pro, 10 minute scan 2/5/17 by Daniel Pett. False bottom added to model in Blender.

[![ORCiD](https://img.shields.io/badge/ORCiD-0000--0002--0246--2335-green.svg)](http://orcid.org/0000-0002-0246-2335) [![License: CC NC-BY-SA 4.0](https://img.shields.io/badge/License-CC%20BY--NC--SA%204.0-lightgrey.svg)](http://creativecommons.org/licenses/by-nc-sa/4.0/) [![DOI](https://zenodo.org/badge/90129815.svg)](https://zenodo.org/badge/latestdoi/90129815)

Roman Well-head

The YT-1300 is a portalized object (POB) ship available to Freelance Pilots. Certification for piloting a YT of this class is granted at Freelancer Ace Pilot. A stock light freighter, the YT-1300 is an adaptable, all-purpose, cargo transport built on a modular design. Off the assembly line, a YT-1300 is a fairly standard vessel, with rudimentary engine, communications, and life-support systems. However, the vessel’s appeal is the fact that it can be upgraded with great ease. In fact, Corellian Engineering Corporation has earned a small fortune selling conversion kits. The most popular modification is an enhanced hyperdrive package, although many pilots also outfit the craft with military-grade weapons, long-range sensor suites, and powerful deflector shields. Han Solo’s Millennium Falcon is the most infamous (and most heavily-modified) YT-1300 in existence

Star Wars Galaxies - YT1300 (Inside)

Rana Chilena - elemento generado para exhibición Humedales 2019.

   Equipo:
   
  <a href="http://orcid.org/0009-0003-1412-1348"><img src="https://img.shields.io/badge/ORCiD-0009--0003--1412--1348-green.svg" alt="ORCID"></a>
  <a href="http://orcid.org/0000-0001-7708-5119"><img src="https://img.shields.io/badge/ORCiD-0000--0001--7708--5119-green.svg" alt="ORCID"></a>
  <a href="http://orcid.org/0000-0002-3288-5347"><img src="https://img.shields.io/badge/ORCiD-0000--0002--3228--5347-green.svg" alt="ORCID"></a>
  <a href="http://orcid.org/0000-0001-8979-2670"><img src="https://img.shields.io/badge/ORCiD-0000--0001--8979--2670-green.svg" alt="ORCID"></a>
  
  
  Repositorio de datos:

Rana Chilena

Medieval weapons pack includes 2 shields, a sword, a slinger, a dagger, a bow with a quiver and arrows, and an ax

Low poly medieval weapons free pack

Design inspired by Viking and Norse shields. Low Poly for VR, games unity, unreal. Normals baked from  high level of detail. Free download

Viking shields fantasy weapons. Download Free.

Buy Now:  artstn.co/m/gdVwo

This Viking Shield (Escudo Viking) 3D model is inspired by authentic Norse round shields from the Viking Age. The model features a realistic wooden plank surface, reinforced with a metal rim and central boss, and decorated with bold Nordic tribal patterns engraved across the front.

The shield includes front and back details, with sturdy hand grips on the rear side, making it suitable for game assets, cinematic renders, VR/AR projects, and 3D printing. Its clean geometry and well-defined details ensure smooth performance in real-time engines and reliable results for physical prints.

Ideal for Viking-themed games, medieval environments, fantasy characters, tabletop props, cosplay accessories, and historical dioramas.

Use Cases

Game asset (RPG, action, fantasy, medieval)

️ 3D printing (PLA, ABS, resin)

Cinematic & animation renders

Props for cosplay or collectibles

VR / AR experiences

Viking Shield Escudo Viking

Heavy cyborg unit, a mobile bastion built around a living (or augmented) human neural core. Walking Reactor: When shields take catastrophic overload, the core deliberately initiates a controlled thermal cascade: venting superheated plasma through exhaust ports. This creates a localized "meltdown zone" that scorches infantry, melts lighter vehicles, and forces Mandate heavies to retreat. Deployed in fixed positions around landing pads, dig sites, or hive hubs. They mount heavier secondary weapons (mortar tubes, anti-air flak pods) for area denial.

![Eryxian Open Game Universe](https://res.cloudinary.com/dnfbskuf4/image/upload/v1774012885/eryxian-worldgithub-250_zqm9hk.png)

[Eryxian Universe Lore](https://eryxian.com/)

COL Meltdown Enforcer

Rock 6 at Foppe di Nadro has a glacier-smoothed surface and, with around one thousand figures, is one of the most densely engraved rocks in this area.  The figures mostly date from the middle to late Iron Age.

It is possible to see all the classical themes of the Camunian rock cycle: footprints (single, coupled and some with internal decoration), human figures (warriors predominating), buildings, weapons, animals and a number of geometric symbols (such as the five-pointed star).

The small section of this rock surface represented in the 3D model presnts one of the most well-known scenes of Valcamonica rock art: two pairs of fighters.  These are of the Naturalistic Period (around 500-300 BC). The fighters are realistically represented in a dynamic posture. One couple fighting with short swords, shields and crested helms, the other engaged in a boxing match.

The group of figures below are in a simpler, more geometric form.  They look cruder but are later, around 1st century BC.

Valcamonica - Foppe di Nadro, Rock 6

Terracotta gladiators figurine showing a Thracian fighting a Hoplomachus.

Terracotta group of two gladiators fighting, each wearing brimmed plumed helmet, each armed with small shield on their left arm (left-hand figure holding round shield, right-hand figure holding square shield with central rib) and straight sword in their right hand. Figure to spectator's right raising his sword-arm and delivering a thrust to the neck of his opponent. Light greyish-brown clay (with occasional calcite inclusions (with mica), red and blue on helmet of left-hand figure, red on lower right leg of left-hand figure.

Both these types of gladiators had distinctively small shields. The Thracian's (right) was rectangular, that of the Hoplomachus was round. The Hoplomachus could also be armed with a spear.

Roman, 1st-2nd century CE. Made in Smyrna or Myrina, Turkey.
Height: 13.50 centimetres, 5.31 inches.
British Museum (1907,0518.4)

3D Printable | IA Design

Terracotta gladiators | 3D Printable

Ryan Shields

A smaller surface in relation to the many very large carved rocks at Foppe di Nadro.  The rock has been extensively smoothed by glacial action.

The engravings here represent two phases of carving.  The first phast presents engravings from the Neolithic Age (4th millennium BC), with 28 praying figures, of which several can be seen here on the 3D model.  They have both schematic and curved arms.  These are contemporary with the circle motifs with a dot in the centre and two figures recognisable as halberds.

The second phase starts from the Middle IronAge and the panel is densely engraved with figures of warriors wielding swords, shields & spears.

The rock also displays some historic phase motifs, with filiforms of lines, half-circles and grids and some Medieval crosses.

Valcamonica, Foppe di Nadro - Rock 35

This small rock was engraved during the second half of the first millennium BC.  The Chronology can be determined through the typology of the weapons clasped by the duelists.  The central section of the rock is decorated with several pairs of battling warriors.  They brandish axes with expanded blades, also represented separately near the warriors, and in some cases they hold decorated shields.

At the far right there are two quatrefoil rosa camuni symbols, adopted as the present day emblem of the Lombardy region.

Valcamonica, Paspardo (Dos Sotolaiolo) - Rock 1

A collection of stylized medieval weapons and equipment designed for fantasy environments, games, and props. This pack includes several classic RPG-style items such as swords, axes, shields, and magical staffs.

The models are suitable for game assets, fantasy scenes, and real-time applications. Each weapon was modeled to keep a clean silhouette and readable shapes.

Included assets:
• Sword
• Double-headed axe
• Axe
• Bow
• Quiver with arrows
• Round shield
• Shield
• Magic staff
• Spear
• Flail

Created in Autodesk 3ds Max.

Medieval Weapon Pack

Miniature Teotihuacan-style incense. The lid depicts a figure wearing a tall headdress with zoomorphic design, with open eyes and mouth, followed by a band with four floral motifs. The face is painted red and displays open eyes, an aquiline nose with a nose ornament, earflares, and a necklace with circular beads. The figure features extended arms, holding two rectangular shields; at the center of the torso there is a horizontal band with a circular appliqué in yellow and red. The bowl has a convex base, a pedestal support, and rectangular handles on the sides. The decoration includes a central talud design, with a red horizontal band at the upper section and another at the lower section, as well as circular appliqués in the middle zone of the bowl. 

 IDAEH Cultural Property No. 1.2.144.1251
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 293

Incense Burner

Polychrome vase with vertical walls and a flat base. It is decorated with a horizontal red band above and below the rim, followed by a hieroglyphic band. The remainder of the surface depicts a military scene, featuring a procession of figures carrying shields and standards.

 IDAEH Cultural Property No. 1.2.179.0146
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 483

Vase with Military Procession

Bolster your army with a complete squad of 7 HEAVY STEEL BERSERKERS. This battle-ready unit is designed for maximum tabletop impact and comes loaded with extra bonus models to expand your forces. Whether you are holding the line or breaching enemy defenses, this massive squad is ready for immediate deployment in your wargaming campaigns. WHAT’S INSIDE THE PACK: The Core Unit: A full squad of 7 highly detailed Heavy Steel Berserkers.Devastating Arsenal: A massive variety of interchangeable close-quarters weaponry, including broadswords, warhammers, energy axes, and heavy shields.Ready to Print: Professionally pre-supported files, fully optimized for resin 3D printing and 100% test-printed.

Heavy Sci-Fi Berserkers – Set of 7 STL Miniatures

Kyrian and Forsworn fan art exploring on and off versions of pristine and corrupted swords with shields.

Added active and default versions of shields to go with the Light and Dark sword sets.

Light and Dark Swords and Shields

Open source, 3D printed face shields, that require no tools and no elastic band for assembly. All you need is a transparent sheet - can be a binding sheet or even cut-out PET bottle and any string or band.

Takes A4/A3 or Letter sized sheets, self-tightening and clip-on. Printing and giving out to workes in need right now, set of two takes apx. 2h 40m

**Download files:** we.tl/t-nlCgMYQu6H

Face Shield - Open Source - v.5.2

The motifs depicted on this small surface form a compelling anticipation of what will come on the subsequent Red Route through this section of the Seradina park - in particular the huge Rock 12.

There is a ploughing scence with harnessed horses, preceded by a duel between two warriors with swords & round shields. These are surrounded by human and animal figures.

Among the animals, that are insome cases accompanied by their young, the most prestigious prey of aristocratic hunting in the Iron Age was the deer, which stand out on the carvings in this area.

Isolated human figures with large hands or arms pointing downwards evoke the presence of individuals of non-warrior rank (shamans?), certainly non-combatants.

资源库

关于这些资源