## Scanning
One single scan with the Trackit was taken, this also is the reason for the missing part on the left bottom since a cupboard prevented line of sight between the tracker and hand piece. To reach the target resolution roughly 13k frames were scanned which comes out to 4min of scanning at 53 framer per second average.

## Post-Processing
I focused on the top part of the scan and used 0.4mm for fusion and meshing without any hole filling. The third image shows the raw captured data with the whole door. Alignment was done in Quicksurface as well as some slight reduction in polygon count to enable Sketchfab upload.

Wrought Iron Oven Door - Revopoint Trackit

## Scanning
Scanning was done at 2mm target resolution and no scan spray was used. I was to lazy to calibrate the Trackit so some of the surface quality defects may be accountable to this problem. Tracking quality was indicated as poor so time to calibrate. Scan was performed in three parts (could have been two but the first placement of the tracker was suboptimal) and each scan consists of paint brush movements until full data quality was reached.

## Post-Processing
Processing work was minimal by first fusing at 1mm (software even recommended 0.75mm) and then aligning the partial scans to one whole scan. Meshing was done at recommended settings and alignment to the coordinate system with Quicksurface.

Tiled Stove - Revopoint Trackit

Jungle Inferno ConTracker

One-handed post-apocalyptic heat tracker
Project based on a concept by Necipcan Karakus (ArtStation)

23,359 Tris

Heat Tracker Sonar

**My Room, My Story: NYC Memories & Daily Rituals**

This 3D model captures my personal space as a canvas of my dual journey, daily routines and NYC adventures. The comfort nook with my bed, fairy lights, and stuffed toys reveals my love for cozy retreats amid design hustle.

The left wall holds my NYC narrative: clipped photos and objects marking cherished memories, places visited, and paths traveled through the city. Each item traces my story across Manhattan's streets and hidden gems.

On the right wall, post-its form my workspace brain dump brainstorming sessions, task trackers, and routine anchors that keep my creative process grounded.

This room isn't just shelter, it's a spatial diary where physical artifacts map my growth as a designer navigating life in New York! Together, they reveal my personality and the stories that shape me.

Mehak Kumar_room

Chevrolet TRACKER 2 PREMIER

Hot Wheels Circle Tracker

Captain Toad Treasure Tracker - Toadette

Chevrolet Tracker_RS

Enabot - Pets GPS Collar with Camera & Fence

ROLA PetTracker - DUMMY

 Orc Hunter - Print-Ready Miniature by Mike Gyver Minis! ⚔️? Stalk your adventurers through the wilderness with this cunning Orc Hunter. Crouched low in the brush and taking careful aim with a feathered blowpipe, this eagle-eyed tracker is poised for a silent, deadly strike. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! ? ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   ? Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  ? Real World Printing: I only showcase the real prints. What you see is what you get.  ? Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  ? Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! ? ? Important Printing Advice:  Prep Matters! ?: A Calibrated printer, Clean build plate (? soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the the blow gun and feathers. Take your time when removing supports! 

Orc Hunter - 32mm

A collection of game aids and kitbashing bits from our projects! Dice, dice containers, tracker tokens, and weapons. We are currently working on the next release which will be the cavewalker specialists part 2 to finish rounding out their weapon options.

Imperial Coalition of Ruug Game Aids and kitbashing bits 1

I am admittedly fond of game aids and the like. Finding a good spot for a turn marker and the “dead” order dice is important, lest they accidently get mixed back into the bag. This compact tray tracks for turns as well as dice kills, yet only measures  138 x 132 mms. It marks up to seven turns (the maximum for almost all BA games); and allows for up to 14 dice kills per player. It fits easily into your gadget/dice bag. It’s a simple and quick print; the raised digits are easily highlighted with paint or a marker. I printed it at .2 mm in FDM.

Deweycat Bolt Action Turn Tracker Dice Kill Tray STL pack

Renault-Nissan-Mitsubishi (Lebanese subsidiary) commissioned 6TMD-Modeling to study a prototype of a high-performance laser tracker, and the project has been completed.
A long-standing benchmark in industrial metrology, this device locates different points in space relative to each other using angle and length measurements. This data mesh allows for the determination of the three-dimensional coordinates of the part.
Laser trackers are small and easily transportable. This feature allows measurement specialists to travel to different production sites to measure large parts according to their clients' needs.
Here, Technician Karlos GON has just tested the "LaserTracker6TMD Pack," a device equipped with an integrated analysis and calculation unit and a specially adapted vehicle for on-site interventions.
This is a humorous, lighthearted illustration, created using SketchUp, intended to elicit laughter.

Laser Tracker 6TMD (Renault-Nissan)

This model shows a Smart Watch: The Amazfit GTR 3 Pro. It runs on the system Zepp OS, is compatible with every smartphone and offers over 150 Sport modes. It comes with an integrated BioTracker 3.0 sensor which measures SpO2, heart rate, stress and sleep. It can be connected via Bluetooth and has storage for offline music in capacity of 2.3GB. The battery lasts up to 12 days which is longer than most prime brand smart watches like Apple Watch which are more costly and only last a few days (depending on the model). The price at the moment is about 100€, so basically you get a lot for less money. The Amazfit GTR 3 Pro is a cheap essential gadget for fitness enthusiasts and professionals who need a stylish and simple working life measuring gadget.

Amazfit Gtr 3 Pro

Camera holder for home, works with GoPro grip

Rola PetTracker support

High quality model of a PL01 futuristic polish MBT with trackers and riggs if you have any further requests or questions contact me at sammcfadden123@gmail.com

资源库

关于这些资源