Free 4K model of a weathered wooden picnic table with attached benches, vintage worn planks, visible nail heads and rustic countryside patina.

Wooden Picnic Table

Yunnan Province, China, ~518 million years old.

*Cotyledion* lived on the sea floor, using **tentacles** to feed on particles suspended in the water. Some individuals have been found attached to small fragment of trilobites. The overall body shape, presence of tentacles surrounding the mouth and U-shaped gut, are characters that unite *Cotyledion* with entoprocts – a modern group of animals that measure less than a centimetre across.

Created for the First Animals exhibition at Oxford University Museum of Natural History: www.oum.ox.ac.uk/firstanimals

Model by Mighty Fossils: www.mightyfossils.com

Cotyledion tylodes

Print Preview:
![](https://puu.sh/jqt3y/25967d26d1.jpg)

The statue of Edward Snowden, called by its creators Prison Ship Martyrs' Monument 2.0, was an ephemeral, illegally-installed public statue of Edward Snowden, an American whistleblower who leaked classified information from the National Security Agency (NSA) and was charged with federal crimes as a result. The bronze-like statue was placed in Fort Greene Park in Fort Greene, Brooklyn, New York City, on April 6, 2015. It was attached to a Doric column on the perimeter of the park's Prison Ship Martyrs' Monument, a memorial and which honors more than 11,500 American prisoners of war who died in the American Revolution.

The statue was mounted by three anonymous artists and their helpers, who were dressed in white helmets and reflective vests of Parks Department workers, early in the morning of April 6, then covered and taken down by NYC Parks officials later that day. 

http://goo.gl/DM7P2H

Bust: https://skfb.ly/Es6I
Column: https://skfb.ly/BUuZ

Edward Snowden At Fort Greene Park

Model of a dodo bought for the museum in 1938.

The head and feet are plaster casts, attached to a body covered in chicken or goose feathers with whole chicken wings added. The tail is made from tufts of ostrich or goose feathers. 

Most models are based on paintings of Dodos which were not scientifically accurate. Now, we know that Dodos were probably much slimmer than this specimen and had longer legs.

Museum object number: NH.38.34

See more: http://www.horniman.ac.uk/object/NH.38.34

Dodo Model

This is a photogrammetry of the remains of the Kannonzaki Battery No. 3 in Yokosuka City, Japan.
The site of a gun battery and the brick tunnel remain in Kannonzaki Park.
Two howitzers were installed in the mortar-shaped turret.

I attached a 20mm prime lens and a clip-on flash to a Sony A1 on a tripod and took 650 photos. The photos were taken on a lightly cloudy day, and the tunnel lighting and de-lighting the outside of the tunnel was done using flash light.

Location: https://goo.gl/maps/e15sdJR4pfKpTRvz8

Kannonzaki Battery Historic Site

DogDay is an anthropomorphic orange-furred dog with black eyes, floppy ears, a black nose, and a yellow outer mouth and belly. His paws and ears, along with the left side of his face, have a copper-red color. Similar to the other Smiling Critters, DogDay is depicted with a wide toothless grin (the inner mouth shrouded in darkness), and he possesses a black zipper line running down his center, with the zipper sporting a gold sun pendant with orange sun rays.

DogDay’s cartoon appearance is roughly the same as his toy appearance, albeit with his zipper line removed, the addition of white pupils, and the zipper pendant now attached to a black necklace.

**This model is free as a gift to the community. please credit me if you use this thank you**

Dog Day - Poppy Playtime Chapter 3

Frog from Chrono Trigger with a little twist. :) There is a tpose rig attached with high quality textures for a free download! The rig isn't the best but should get ya started! Hope you all enjoy! 

Here is some renders from UE5 for case reference https://www.artstation.com/artwork/048mY5

Sir Frog - Chrono Trigger

Simple Toon character for hyper casual games.

**Features:**

* Colours are easily adjustable.

* The stickman has attached skeleton.

**Model supports humanoid animations from Mixamo.com and assetstore**

Skins:

* [Gentle Stickman](https://skfb.ly/ow6MC)

* [The Witcher Stickman](https://skfb.ly/owJxI)

* [Hellboy Stickman](https://skfb.ly/oxUEs)

* [Link Stickman](https://skfb.ly/oy7Lt)

* [Grut Stickman](https://skfb.ly/oySBy)

* more soon...


[![](https://www.buymeacoffee.com/assets/img/guidelines/download-assets-sm-2.svg)](https://www.buymeacoffee.com/koloshuk)

Stickman

Ruben Victoriano's mansion interiors from **The Evil Within** game. Here is an empty house only, no objects, no furniture. All the doors are attached to their places as a separate objects.

Sketchfab generates incorrect model preview, so some walls, doors, lamps, paintings on the walls are missing, and if you download model from here, you should use file from the **'source'** folder

The scene has been composed in Unreal Engine from original game assets and exported to fbx. Here is a model with compressed textures, but you can download original FBX with uncompressed multichannel tga textures from my website (check my profile)

The Mansion interiors

Material: terracotta; made (1571-1631) by Louis-François Roubiliac, slightly to left, wearing a doublet, cloak and large ruff, attached to a rectangular painted stone socle of waisted form.

Model updated by Thomas Flynn 05/05/2016:
Canon G7x, 134 photos, Agisoft PhotoScan

Portrait bust of Sir Robert Bruce Cotton

The Primitive Orbital Station is a Kerbal parody of the historical Soviet Almaz and Salyut space station programs. Shown here is a "Cislunar" orbital complex acting as mothership for 2 mini landers and a micro shuttle supporting the Lunar (KSP: Munar) exploration program. 

The P.O.S. is constructed with parts from Level 1 Research Complex with modules launched using medium lift rockets under 140 tons (i.e., I am too cheap to upgrade the Research Facility with 902,000 funds in a KSP Career game). 

This station is built around a standard Habitation Module with two LK-0 mini-landers and one X-1A Micro Shuttle attached to facilitate orbital rescue or crew recovery during cislunar (KSP: cismunar) operations. Propulsion for the translunar (KSP: transmunar) injection phase of the mission is provided by the POS-2 Propulsion Module which is discarded on a collision course with the Moon (KSP: Mun). 

Note: The acronym for this space station is a pun on this being a very small and quite crappy orbital station!

KSP: Primitive Orbital Station Complex

i fixed her arm's uv cuz it was attached to the concept art
what toon/twisted/skin should i export next?

Connie - Dandy's World

Built around the skeletal remains of the Godzilla that attacked Tokyo in 1954, Kiryu was an advanced cyborg designed to defend Japan from the kaiju that frequently menace it, particularly the current Godzilla. Kiryu first saw action in 2003 when he was deployed to battle Godzilla when he surfaced at Hakkeijima. However, Godzilla's roar awakened the original Godzilla's restless spirit that was attached to Kiryu's skeleton, causing the machine to go berserk. Kiryu was recalled and his programming altered so this incident could never occur again, then was sent out against Godzilla a second time when he landed at Tokyo. Kiryu fought Godzilla to a draw, leaving him with a gruesome chest wound and himself losing an arm. Kiryu was rebuilt over the course of a year, and sent into combat with Godzilla again when he returned to Tokyo. Kiryu fought alongside Mothra and her twin larvae, and finally triumphed against his organic counterpart by reopening the wound on Godzilla's chest.

Kiryu - Millennium Mechagodzilla - Godzilla PS3

The square academic cap, graduate cap, cap, mortarboard (because of its similarity in appearance to the mortarboard used by brickmasons to hold mortar) or Oxford cap, is an item of academic dress consisting of a horizontal square board fixed upon a skull-cap, with a tassel attached to the centre.

Mortarboard Graduation Hat

Christ statue of the forest devotion by Angelo Bortolotti in the 2nd district of Vienna.

After the opening of the Prater in 1766, people settled on the edge of the Prater. In 1862 an elementary school was opened. The principal attached an image of the Virgin Mary to a large tree in 1863 because the nearest church was far away. Franz Plankenbüchler was an innkeeper and ran a restaurant at Freudenauer Dammhafen. Franz, a deeply religious man, often crossed himself before the image of the Virgin Mary during his walks. In 1911, he decided to erect a statue of the Virgin Mary in a good spot nearby. This was the beginning of today's place of pilgrimage, which also includes a church (Maria Grün) since 1924.

Christusfigur

PBR baked material version of the classic Chinese Dragon model sourced from Morgan McGuire, Computer Graphics Archive, July 2017 (https://casual-effects.com/data).

I've fixed some geometry issues and did a clean-up sculpt to remove scanning artefacts, then quad remeshed the model to be lower poly and baked the normal map from the sourced model. I created this to test shaders in Unity mainly using the normal map but have also textured it to look like Jade.

Also attached is the Unity HDRP textures and the baked 8K OpenGL Normal Mesh Map from Substance Painter.

Stanford Dragon PBR

The Grim Reaper's scythe is a powerful and iconic symbol often associated with death and the afterlife. It is commonly depicted as a large, curved weapon with a long wooden handle and a sharp, curved blade attached at the top. The scythe's blade is usually extremely sharp and polished, representing the swift and inevitable nature of death.

Raven Scythe

**Just updated this download with a new stl file file for printing (21 June 2020) - noticed error in earlier version.**
 A high-poly Zbrush model ready for 3d printing  The model depicts a British cavalry officer during a cavalry charge in WW1.  *During the first world war cavalry tactics changed with an emphasis on dismounted firepower and covering fire from the flanks, using machine guns and attached artillery to support cavalry charges.*  The download for this model includes the textured fbx file displayed here and an stl file ready for 3d printing - see images below.  The stl file is based on a high-poly version of the model decimated for printing.  I have hollowed out the model and thickened some of the very thin parts to help with printing.

![](https://i.imgur.com/93bLBoAh.jpg)
![](https://i.imgur.com/hjg9sX1h.jpg)
![](https://i.imgur.com/9tfnjG5l.jpg)

Cavalry (new stl file) charge - WW1 - British

This is for the MasterpieceVR “Imagine And Create A Sustainable Future” competition.
This habitat is a Volaspire. It has four flying transportation pods capable of independent flight to transport small groups to the main tower. Once attached to the main tower the flight pods become propellers and the whole tower is capable of transporting over 200 passengers. The flying pods are ai controlled and have near perfect balance during flight.  When not in flight the propellers of each pod turn into large solar energy collectors and help charge the main tower. The main tower is equipped with wind turbines and solar cells. The docking station has over an acre of green space for growing food for passengers and creating organic material for four large scale 3d printers. The printers can run continuously to print new parts or replacement parts from 100% organic material grown on site. The Volaspire is an ancestor of the [geistspire](https://skfb.ly/6yEJX) of the kingdom biotronican.
All modeling done in MasterpieceVR.

Volaspire - Air Habitat/Transportation System

The vessel that started a new era.

"The ship is a solid, well-designed and well-built small yacht with a small living space. The ship had been designed around a standard engine configuration and used a well-known build code."

CC0 License
Original Author: Chris Kun

*the uploader of the model is NOT Chris Kun nor claims to have authored the attached model*

Epstein's Yacht (The Expanse)

The globe has a round, Dutch-type base, equipped with a compass (the needle and the glass plate are missing) with the rose of the winds on the dial. The names of the directions are abbreviated, and north is marked with a fleur-de-lys. The globe’s horizon is made of wood and has an octagonal shape. It is supported by four legs turned in wood. The globe is 7–9 cm wide, with each side having the length of about 20 cm. Attached to the wood is a paper layer made of four parts. It depicts the azimuth, zodiac (degrees and symbols), as well as Julian and Gregorian calendars. All the elements are given Latin names. The cardinal and intermediate directions of the world are described in German.

Johann Gabriel Doppelmayr (1677–1750)

after 1744, Nuremberg

Jagiellonian University Museum Collegium Maius

Inventory number: 4120; 120/V

https://muzea.malopolska.pl/en/objects-list/2725

Celestial globe

The presented telephone set in a wooden housing was designed to be mounted on the wall. It was equipped with an ebonite microphone attached to the front of the housing and a trumpet-shaped earpiece rigidly attached to the forks on the left side of the housing. On the side, the device has two clamps for the wires carrying the telephone signal.

Time and place of creation: 1889, Kraków

Creator: Stanisław Freund

Inventory number: 4891; 896/V

Museum: Jagiellonian University Museum Collegium Maius

https://muzea.malopolska.pl/en/objects-list/2799

Digitalisation: Digitalisation: RDW MIC, Virtual Małopolska project

Telephone

Fully textured and rigged Redcap Oranda goldfish model with sample animation.

Redcap Oranda as the name suggests is a breed of goldfish with silver body and red wen which resembles a cap attached to its head.  Known as Tancho goldfish in Japan, this breed and rest of Oranda goldfishes actually have nothing to do with the country of Netherlands (Holland, where the word Oranda came from).

So I wanted to show off the long transparent fins, resulting in the rear view sexy shot for thumbnail.  Please spin it around to also see its cute wen covered face!

* Sculpting, modeling, rigging, animation done in Blender
* Texturing done in Substance Painter

All C&C are welcome!  Let me know what you think!

Redcap Oranda goldfish

Taken with 240 photos and processed using realityCapture.

This angel has no name attached to it and looks fairly new (placed withing the past few decades. "New" is relative after all.)

If you use it, share it. Show us all what you've done. :)

Asset Library

About These Assets