This Stegosaurus skeleton from the Denver Museum of Nature & Science is more than 26 feet long and over nine feet tall. The bony beast is a permanent display with steel shaped around it, welded in place, and puttied together, making it impossible to take apart. Which means it was super difficult to scan! Triebold Paleontology, Inc. scanned the dinosaur using Artec Space Spider and Artec Studio software. The scanning involved crawling into the rib cage, then perching atop a step ladder just to reach the peaks of the big fan-shaped plates on the dinosaur’s back. The scanner captured everything from the nose to the tail spikes. Beyond aligning the scans, Artec Studio also reduced the mesh size to the desired level for manipulating the 3D model and 3D printing. Scanning time: 1 week - Processing time: 2 months (629 individual scans across 71 scan projects).

Read more here https://www.artec3d.com/cases/3d-scanning-one-piece-dinosaur-skeleton-minute-detail

Stegosaurus Skeleton

3D scan of a taxidermized Beluga or European Sturgeon (*Huso huso*). The primeval bony fish was common in the Black See and migrated upstream every year to lay eggs. In the Danube River it was observed up to 2,500 kilometers upstream from the estuary; its main spawning ground was in Hungary. The female’s roe is very valuable and is seen as a delicacy. That is why wild populations have been greatly reduced due to overfishing. 

This specimen can not be found in the exhibition of the NHM Vienna, but a  very similar specimen of the Beluga Sturgeon is Number 63 of the NHM Top 100 and can be found in Hall 25 of the NHM Vienna. 

**Specimen**: *Huso huso* (Linnaeus, 1758)

**Acquisition number**: NHMW-ZOO-FS-2012.IX.5 

**Collection**: Natural History Museum Vienna, 1st Zoological Dept., Fish Coll. (curator: Ernst Mikschi)

Find out more about the NHMW [here](http://www.nhm-wien.ac.at/en).

Scanned and edited by Anna Haider & Viola Winkler (NHMW)

Scanner: Artec Leo. Infrastructure funded by the FFG.

Beluga Sturgeon (NHMW-ZOO-FS-2012.IX.5)

**Night chair**

19th century, Poland

In Poland, portable toilets like this chair were called, inter alia, a stool, a toilet or a cacatuar, a cacquet or a carafe, in French fashion. This item was located in a special separate room or was moved around the house. Grander versions sometimes resembled a real throne, hence perhaps the Polish term “sit on the throne”, referring to the toilet seat. The press advertised stools as “armchairs for going outside while staying inside”. Ebony wood.

It has a low seat, enclosed, with a flap under which there is a hole, intended for a chamber pot. A door is fitted at the back, which could be opened with a key in order to replace the vessel.

**For more images and further information, visit:** 
https://muzea.malopolska.pl/en/objects-list/735

Inventory number: MNPE/S 182

Vistula Ethnographic Park Museum in Wygiełzów and Lipowiec Castle

**Digitisation: Regional Digitisation Lab, Małopolska Institute of Culture in Kraków, Poland; “Virtual Museums of Małopolska” Project**

Night chair

A tall, towering creature with unnaturally long legs and a heavy, compact upper body. Its back is dominated by a thick, turtle-like shell that appears broken and irregular, formed with bony edges and sharp protrusions. From parts of the shell grow withered wing membranes, half bat-like and half moth-like, torn, frayed, and full of holes. The head is reptilian and elongated, with a narrow skull, sharp teeth, and large, round, softly glowing eyes reminiscent of a moth, lacking visible pupils. Branching deer antlers grow from the forehead, uneven and partially broken, with small moth cocoons and threads hanging from them. The skin is a disturbing mix of scaly reptile texture and velvety moth surfaces, dusted around the neck and joints with fine moth-like powder. Long, thin arms end in clawed hands, while digitigrade legs give it a tense, stalking posture. A long armored tail trails behind, slightly clubbed at the tip.

Ancient Moth Reptile Shell Creature

A terrifying flying horse demon with a faceless skull-like head and an exposed skeletal structure. The body is thin, bony, and unnatural, with visible ribs and stretched limbs that give it a disturbing, undead appearance. Large wings extend from its back, built from bone and torn membranes, allowing the creature to hover silently through the air. The absence of a face enhances the horror, making the creature feel soulless and cursed. Its posture is aggressive yet controlled, as if it is an ancient demon bound to the skies, perfect for dark fantasy, horror scenes, or hellish environments.

Flying Faceless Horse Skeleton

From Yo-kai Watch Blasters.

* Credit Level5

3DS - Yo-kai Watch Blasters - Robonyan 28

From the 1st Yo-Kai Watch game for Nintendo Switch.

* Credit Level5

Nintendo Switch - Yo-kai Watch 1 - Robonyan

**game: Carnivores 1 / 2**
Dimorphodon is an ambient animal in Carnivores, Carnivores 2, and Carnivores: Dinosaur Hunter.

**reality**

Dimorphodon (from the Greek di, "two," morphe, "form," and odon, "tooth"; "two-formed teeth") is a genus of rhamphorhynchoid pterosaurs from the Early Jurassic, 195 to 190 million years ago. It was named by paleontologist Richard Owen in 1859.

Dimorphodon had a wingspan of approximately 1.4 m and a length of 1 m, including the tail. It had a large, bulky skull, the weight of which was reduced by the presence of large cavities separated by thin bony walls. This structure, reminiscent of the arches of a bridge, led Owen to assert that no other vertebrate had achieved such weight efficiency in its skeletal structure.

Dimorphodon

Divine World offers high-quality [original Karungali Malai online](https://divineworldindia.com/category/original-karungali-malai), crafted from authentic ebony wood known for its spiritual significance and durability. Each mala is carefully manufactured in our own factory in Haryana, ensuring strict quality control and superior craftsmanship. Our Karungali Malai is certified for authenticity, making it a trusted choice for those seeking protection, positive energy, and spiritual balance. Designed for daily wear and spiritual practices, it combines tradition with purity.

Original Karungali Malai | Divine World

For production-ready use, we recommend downloading the Original format.The viewer version is intended for web viewing only. In the Original format, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ accurate texture maps✔ correct object namesIf you plan to use this model in production, download the Original format.Wooden bathrest or tray that fits over bath.

Bathrest Ebony

** Salomon X Ultra 4 GTX Hiking Women's Shoe **<br>
*(Lunar Rock / Ebony / Mint Leaf)*

*Conquer uphills and descents with the X Ultra 4 GTX; Designed for women with the agility of a trail running shoe and the stability, grip, and waterproof protection you need for technical hikes.*

*31.2 x 15.0 x 11.2 cm (121 micrometers per texel @ 4k)*

Scanned using advanced technology developed by inciprocal Inc. that enables highly photo-realistic reproduction of real-world products in virtual environments. Our hardware and software technology combines advanced photometry, structured light, photogrammtery and light fields to capture and generate accurate material representations from tens of thousands of images targeting real-time and offline path-traced PBR compatible renderers.

Zip file includes low-poly OBJ mesh (in meters) with a set of 4k PBR textures compressed with *lossless* JPEG (no chroma sub-sampling).

![salomonUltra](http://www.inciprocal.com/media/post/img/Salomon_Ultra_01_1080p.jpg)

Salomon X Ultra 04W

A four-string gusle – złóbcoki (gęśliki) – formerly the essential instrument of every highlander band. They were made of a single piece of wood. They have a navicular shape and a narrow resonating body with a neck. They terminate in a pin chamber with a head in the shape of a long-haired highlander’s head. The instrument was made of a piece of sycamore wood; the additions are made of ebony wood.
The gusle on display was made by Stanisław Czepiel (born in 1936) – the last luthier in the Pieniny region, a graduate of the Conductors School at the Academy of Music in Kraków, a musician and luthier. 

ID no.: MNS/MS/1126 - E

Time and place of creation: 2003, Krościenko nad Dunajcem, Poland

Museum: Nowy Sącz District Museum

https://muzea.malopolska.pl/en/objects-list/2450

Digitalisation: RDW MIC, Virtual Małopolska project

Gusle

For proper use, we recommend downloading the Original format.The Converted version is intended for web viewing only. In the source file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ proper object namingIf you are going to integrate the model into a project, choose the original version.Ebony wood window with large rounded corners. The window is ideal for huts and mountain building constructions.

Asset Library

About These Assets