This is a 3D animation ("Shelly") of a near-adult loggerhead (ID=982.000406129037) sea turtle (*Caretta caretta*, straight carapace length=86 cm) that was initially captured on June 23, 2017 by the Inwater Research Group, and then photgraphed with the Beastcam technology with 20 Canon G16 cameras.  Photographer Christine Shepard operated the cameras and the sea turtle was released that same day in good condition.  The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin  used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements.

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 47A - Loggerhead Sea Turtle

This is an animation (“Mar”) of a hatchling Hawksbill (ID Ei1801) sea turtle (*Eretmochelys imbricata*, straight carapace length 11.8 cm) that was initially rescued by the Loggerhead MarineLife Center, and then photographed with the Beastcam technology with 30 Canon G16 cameras. The sea turtle was released soon after in good condition. The 3D model was initially created through a photogrammetry scan using Capturing Reality.

Animator Johnson Martin used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center each provided feedback on the movements

If you are interested in downloading this 3D model, please visit our website www.digitallife3d.org

Model 50A - Hawksbill Sea Turtle

This is an animation of a juvenile (straight minimum carapace length = 27.5 cm, mass = 3.0 kg) green sea turtle (Chelonia mydas) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Inwater Research Group during an in-water assessment to gain valuable insights into the demographics of this threatened species.  The turtle was in good health and released back into the wild.  A CG artist (Johnson Martin) reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 72B - Juvenile Green Sea Turtle

This is a 3D model ("Mary") of an adult (curved carapace length 940 mm) female flatback sea turtle (Natator depressus, PIT tag 900119000520197, captured 11/21/17, Thevenard Island, Western Australia) as part of the Department of Biodiversity, Conservation and Attractions' North West Shelf Flatback Turtle Conservation Program (DBCA-NWSFTCP) with Scott Whiting (DBCA), Sabrina Fossette (DBCA) and Adrian Gleiss (Murdoch University). The turtle was photographed on a nesting beach using the Beastcam system and released in good condition. The 3D model was created through a photogrammetry scan using COLMAP and Autodesk REMAKE. Animator Jer Bot used Blender to reconstruct the sea turtle. Credit should be given to the Digital Life project and NWSFTCP: “The author(s) acknowledge the Digital Life project and the Department of Biodiversity, Conservation and Attractions’ North West Shelf Flatback Turtle Conservation Program for creation of the 3D flatback turtle model”.

Inquire about licensing: **www.digitallife3d.org**.

Model 53A - Flatback Sea Turtle

This is an animation of a juvenile (straight minimum carapace length = 75.1 mm, mass = 72.8 g, age=20 days) Leatherback sea turtle (Dermochelys coriacea) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Jeanette Wyneken (Florida Atlantic University) for her research on leatherback ecology and development, and the model was created in collaboration with the Upwell Non-Profit (https://www.upwell.org/).  CG artist Johnson Martin reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 74A - Juvenile Leatherback Sea Turtle

This is a swimming animation of an adult female leatherback sea turtle (*Dermochelys coriacea*).  The [Loggerhead Marinelife Center](https://marinelife.org/) (LMC) provided rare footage of a female turtle named Mac nesting during daytime, which was used to reconstruct this model. Mac (ID 666; PIT tag 989001001220036) has a minimum curved carapace length of 145.4 cm and a curved carapace width of 107.5 cm. Existing data on leatherbacks was also referenced. CG artist Johnson Martin used these data to reconstruct and animate the model using Blender software. 

This research was done in collaboration with [Upwell](https://www.upwell.org/) and LMC, with special thanks to Dr. George Shillinger, Dr. Heather Harris and Dr. Kristin Reed of Upwell; Dr. Justin Perrault and Derek Aoki of LMC.   Thanks to Upwell for providing funding.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 95A - Adult Leatherback Sea Turtle, "Mac"

Extracted with Unity Asset Explorer

The Void Chelicerate is a subspecies of the striking red Chelicerate in other biomes of Sector Zero of 4546B. This subspecies has gotten much larger, more aggressive, and other changes. One of these changes is how the Void Chelicerate has these orange eyes and a pale white carapace, with patches of what seem to be scars, infected tissue, or something else of the sort. The mandibles are also more green than black, and the transparent fins are also light blue. They can be found in the Void that surrounds the entierity of Sector Zero, like the one at The Crater.

Asset made by UnknownWorlds devs of Subnautica Below Zero

Void Chelicerate

Le sclerocalyptus ou glyptodon est un genre de tatous géants vivant durant le Néogène en Amérique du Sud

Carapace sclerocalyptus

A cousin and abberant subspecie of the Alpha Ripper, the Scorched Ripper is a six-legged version of the crimson xenohyena that roams the remnants of the Eryxian jungle. While most active during the Scorched Season, some individuals survive underground through normal cycles, posing a formidable threat in excavation tunnels, outpost building sites, and to mining drill parties.

When the suns of Eryxia reach their zenith and the jungle bursts into flame, most life either flees or perishes. The  Scorched Ripper does neither. Its reinforced carapace—its heat-resistant chitin and fused metallic growths—allows it to thrive in temperatures that would melt lesser flesh. 

![Eryxian Open Game Universe](https://res.cloudinary.com/dnfbskuf4/image/upload/v1774012885/eryxian-worldgithub-250_zqm9hk.png)

[Eryxian Universe Lore](https://eryxian.com/)

Xenohyena: Alpha Ripper Scorched [Concept]

A creature concept sculpt of a “Fire Crab,” designed to blend natural crustacean anatomy with elemental, flame-inspired features. The form emphasizes hard, layered shell plates contrasted with flowing, heat-like shapes to give the impression that the creature is infused with fire from within.

This piece focuses on exploring silhouette, texture, and surface detail, with an emphasis on dynamic forms and visual storytelling. The claws and carapace are exaggerated to enhance its aggressive presence, while the overall design aims to feel both grounded and fantastical.

Created as a high-resolution sculpt, this model is intended for concept work, creature design exploration, or as a base for further retopology and game-ready development.

I'd love to hear how you use the little fire guy!

Fire Crab Concept Sculpt

Zoomorphic effigy vessel in the form of an armadillo, decorated on the exterior surface using incising and carving techniques. The vessel has a slightly concave base and gently curved-convergent walls. A spout oriented toward the rim represents the head. When inverted, the armadillo figure is clearly visible; its back displays a grid-like decoration resembling the animal’s plated carapace, complemented by two horizontal bands ornamented with hatched triangles.

 IDAEH Cultural Property No. 1.2.144.0302
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 351

Zoomorphic Effigy Vessel-Form of a Armadillo

A highly detailed, game-ready 3D model of a Red-Footed Tortoise, featuring realistic texturing with the species' characteristic yellow-orange scutes, deep brown carapace with amber highlights, and vibrant orange-scaled legs.

Key Features:
- Realistic PBR textures capturing the tortoise's natural coloration
- Detailed shell geometry with accurate scute segmentation
- High-quality skin and scale detail on limbs and head
- Clean topology suitable for games, animations, and renders
- Ideal for wildlife scenes, educational content, nature documentaries, and game environments

Suitable for use in:
Unreal Engine
Unity
Blender
Cinema 4D
Other major 3D platforms.

Red-Footed Tortoise -- Detailed 3D Model

Anthropomorphic whistle representing a figure in the form of the Old God, depicted seated with legs flexed forward and hands resting on the knees. The figure displays attributes associated with old age, including a wrinkled face, a mouth with few remaining teeth, and a sagging body. A turtle carapace on the back is a notable feature, identifying the figure as a Pawahtun (God N). The figure wears a headdress in the form of a snail shell.

IDAEH Cultural Property No. 16.2.5.0943

www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Asset Library

About These Assets