The Sierra Leone-flagged EDRO III ran aground off Pegeia on 8 December 2011 in heavy seas, during a voyage to Rhodes, from Limassol, Cyprus with a cargo of plasterboard. At the time of the accident, the ship had nine crew members - seven Albanians and two Egyptians. The crew were rescued and airlifted to the safety of Paphos by a local British Military helicopter.

The EDRO III weighs about 2,345 tons and is over 80 meters in length. According to Cyprus Marine Environment Protection Association CMEPA, the ship is empty of all cargo and fuel oil and rests on the sea rocks at an 11-12 degree angle. Embarking on the ship is no longer permitted as it is dangerous. Together with Germany's CIMEXTA Vessel Salvage Company, the task of safe removal of all diesel, hydrocarbons and marine pollutants onboard the vessel, and watertighting the hull was awarded to a Cypriot marine salvage company. This was completed in October 2013.

Shipwreck

Ganesha (Sanskrit: गणेश Gaṇeśa m.) literally: "Lord (Isha) of the hosts (Gana)"; name of the god of the beginning. Ganesha is the elephant-headed god in Hinduism. He is the son of Shiva and Parvati and the brother of Subrahmanya. He also goes by the names Ganapati and Gananayaka. Ganesha symbolizes the removal of all obstacles and represents a good beginning; lord over obstacles (see gaṇa-pati). Ganesha is often invoked at the beginning of new enterprises. Ganesha is also written Ganesa, Ganesh, Ganes and Ganesha.

Ganapati / Ganesha

The presented motorcycle is equipped with three ion turbines. They create traction by ionizing the passing air. Such a motorcycle cannot fly fully, but it can soar at a height of 30-50cm. By changing the angle of inclination of the turbines, the direction of movement is set. The presence of three turbines gives amazing stability to the motorcycle. And the removal of the front turbines on movable consoles, controlled by AI, gives greater maneuverability. By increasing or decreasing the distance between the front turbines, you can increase the crossability and stability (in max distance) or maximum speed (in min distance)

The model is designed for SiFi Motorcycle Challenge and for fan))

You can also download this thing here: https://www.thingiverse.com/thing:4482911

My patreon https://www.patreon.com/ill_drakon

My instagram https://www.instagram.com/drakon_ill

Ion tricycle - Sci-Fi Motorcycle. 3D printable

An updated 3D scan of Old Waverly Town Hall restoration in Baltimore, MD. It was built in 1873 to serve as a public hall for the Waverly community. The city plans on restoring the building to its original 19th-century design. There has been a lot of progress since the last time I scanned it about three months ago. Some noticeable changes include the extension of the windows to their original length, restoration of the cornices, removal of fire escapes, repaired roof, and interior construction.

Shot with a DJI Mavic Air 2, 750 photographs

[Version 1](https://sketchfab.com/3d-models/old-waverly-town-hall-6376e15de51e4bbcbd1d3a754fa35231)
![](https://i.imgur.com/Koxe8uw.jpeg) 

Before Construction 
![](https://www.mahanrykiel.com/wp-content/uploads/2017/11/Town-Hall_0000_00.jpg)

Rendering of renovations
![](https://www.mahanrykiel.com/wp-content/uploads/2017/11/Town-Hall_0001_01.jpg)
[Mahan Rykiel Associates Inc's ](https://www.mahanrykiel.com/portfolio/waverly-main-street-master-plan/)

Old Waverly Town Hall v2

After the removal of the Temple Bar Gate on the Strand this memorial was built to mark the location of the western entrance to the City of London. It was designed by Horace Jones and features a dragon on top and statues of Queen Victoria and the Prince of Wales on the sides.

Date: 1880

https://en.wikipedia.org/wiki/Temple_Bar,_London#Temple_Bar_Memorial

325 photos taken in September 2020 with a Sony a6000 and processed in Reality Capture.

Temple Bar Memorial

This 3D model represents a Twist Drill Bit (HSS 10mm), a commonly used cutting tool in machining and manufacturing processes. The model includes key features such as helical flutes, cutting edges, and a cylindrical shank.

Twist drill bits are widely used for drilling holes in materials like metal, wood, and plastic. The helical flutes help in chip removal and improve cutting efficiency.

This model demonstrates advanced CAD techniques, including helical geometry creation, sweep features, and detailed surface modeling. It was created as part of a mechanical CAD practice series to improve skills in modeling real-world engineering components.

Twist Drill Bit (HSS 10mm)

Orc Berserker - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Unleash sheer fury upon your tabletop with this towering Orc Berserker. Roaring with savage bloodlust and raising twin axes high above its head, this muscular brute is ready to carve through your party's front lines. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer  to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.    👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.    Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the Axes and hair. Take your time when removing supports! 

Orc Berserker - 32mm

 Orc Hunter - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Stalk your adventurers through the wilderness with this cunning Orc Hunter. Crouched low in the brush and taking careful aim with a feathered blowpipe, this eagle-eyed tracker is poised for a silent, deadly strike. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab Printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the the blow gun and feathers. Take your time when removing supports! 

Orc Hunter - 32mm

Orc Rogue - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲 Bring lethal stealth to your next encounter with the elusive Orc Rogue. Hidden beneath a tattered hood and lunging forward with twin daggers drawn, this vicious assassin is perfectly posed for a devastating sneak attack. Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉 ⚔️ Expand Your Set  Looking for the Orc Shaman, Druid, Warlock, War Drummer to match this model?  I archive all the class archetypes, elite and command units from this set exclusively on Patreon.   👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis ⭐ Why Mike Gyver Minis? ⭐  🏅 Real World Printing: I only showcase the real prints. What you see is what you get.  🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.  🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab printers.  ⚙️ Bambu/FDM Ready: Want the tuned, plug-and-play .3mf project file? You can grab it right from my Makerworld page!  ➡️ https://makerworld.com/en/models/2509354-orc-berserker-mgm-print-ready-mini#profileId-2759396 ⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.  You may: Print this file for yourself, your friends, or for gaming sessions. You may NOT: Sell the physical prints, sell the digital files, or distribute the files.   Want to sell these prints? Join the Merchant Tier on my Patreon!  Merchants get:  ✅ Commercial License to sell physical prints legally.  ✅ Bambu Lab Optimized Files (Pre-supported & Tested).  ✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).  ➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis  Spend less time troubleshooting, more time playing! 🎉 🔥 Important Printing Advice:  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential. Support Removal: Use tweezers/cutters ✂️ carefully. Minor cleanup (light sanding) where supports touch is normal. ✨ Take Care: Be very careful around the knives and cape. Take your time when removing supports! 

Orc Rogue - 32mm

## Scanning
I simply chose IR mode with the large setting, automatic exposure and geometry tracking. One setting that initially confused me was the base removal. It is turned on by default and therefore the floor wasn't scanned at all, after disabling the floor is also captured. Additionally when changing scan settings in the UI you must press "Apply" for the changes to come in effect. After starting scanning I just slowly moved around the sofa always using the folds and creases of the pillows as geometry to track. The IR performance really reminds me of the Sermoon S1 (P1 in standalone reaches somewhere between 10 to 15FPS, 30 FPS connected to a PC (wired and wireless) as the S1 does). Hopefully the IR mode can still be made faster in standalone mode but I guess this is always the case for every scanner and every mode (laser scanning already reaches 60 FPS). The whole scan took maybe 4 to 5 min.

CouchSofa (IR scan) - Creality Sermoon P1

This bust of Breonna Taylor is available to everyone supporting Black Lives Matter and civil rights, and is presented with love by the father-and-son team of sculptors, Daniel and Rodman Edwards.

“While protesting is pivotal, there are plenty of other effective modes of activism,” said Rodman Edwards, “we agreed that using our talents was the best way we could show our support.”

“As we are now seeing the removal of the statues that are monuments to systemic racism, we believe it is time to put the power of commemorative statuary into the peoples’ hands. For the first time in history, individuals have the right to choose who they wish to memorialize forever,” said Rodman Edwards.

Breonna Taylor

This bust of Sandra Bland is available to everyone supporting Black Lives Matter and civil rights, and is presented with love by the father-and-son team of sculptors, Daniel and Rodman Edwards.

“While protesting is pivotal, there are plenty of other effective modes of activism,” said Rodman Edwards, “we agreed that using our talents was the best way we could show our support.”

“As we are now seeing the removal of the statues that are monuments to systemic racism, we believe it is time to put the power of commemorative statuary into the peoples’ hands. For the first time in history, individuals have the right to choose who they wish to memorialize forever,” said Rodman Edwards.

Sandra Bland

This bust of Elijah McClain is available to everyone supporting Black Lives Matter and civil rights, and is presented with love by the father-and-son team of sculptors, Daniel and Rodman Edwards.

“While protesting is pivotal, there are plenty of other effective modes of activism,” said Rodman Edwards, “we agreed that using our talents was the best way we could show our support.”

“As we are now seeing the removal of the statues that are monuments to systemic racism, we believe it is time to put the power of commemorative statuary into the peoples’ hands. For the first time in history, individuals have the right to choose who they wish to memorialize forever,” said Rodman Edwards.

Elijah McClain

This bust of Ahmaud Arbery is available to everyone supporting Black Lives Matter and civil rights, and is presented with love by the father-and-son team of sculptors, Daniel and Rodman Edwards.

“While protesting is pivotal, there are plenty of other effective modes of activism,” said Rodman Edwards, “we agreed that using our talents was the best way we could show our support.”

“As we are now seeing the removal of the statues that are monuments to systemic racism, we believe it is time to put the power of commemorative statuary into the peoples’ hands. For the first time in history, individuals have the right to choose who they wish to memorialize forever,” said Rodman Edwards.

Asset Library

About These Assets