Free vintage rangefinder camera model with ornate wear, leather strap and detailed lens - high-res prop for retro scenes, stills, animations, and product shots.

Camera 01

Free 8K model of a worn wooden treasure chest with ornate iron straps, rivets and a weathered, antique maritime look.

Treasure Chest

Free 4K model of a worn, creased cardboard box with torn flaps, taped seams and a weathered strap - aged, dented paper texture and realistic damage.

Cardboard Box 01

Free 8K model of a red Korean fire extinguisher with weathered paint, pressure gauge, hose and yellow strap, mounted on a scuffed base.

Korean Fire Extinguisher 01

Free 4K model - arched medieval double wooden door with weathered wood, iron straps, rivets, ring handles and small barred windows; fortified character.

Large Castle Door

Free 4K sectioned folding metal ladder with flat treads, orange safety caps and straps, telescoping industrial finish with light wear.

Ladder Sectioned 01

A high-poly Zbrush model ready for 3d printing.  I have printed this model on my Anycubic Photon resin printer - see pictures below.  I am planning to do another version in an action pose - not sure what yet - any ideas?  Tip:  When preparing the model for painting - be careful of the chin straps hanging from the helmet - very delicate!

![](https://i.imgur.com/kBEPPS3l.jpg)
![](https://i.imgur.com/RPDoCAUl.jpg)
![](https://i.imgur.com/nI8t6ZPl.jpg)

US Soldier WW2 - 3d Printable - Free

San Lorenzo Colossal Head 6 is one of the smaller examples of colossal heads, standing 1.67 metres. It measures 1.41 metres wide by 1.26 metres deep and is estimated to weigh between 8 and 10 tons. The head was discovered by a farmworker and was excavated in 1965 by Luis Aveleyra and Román Piña Chan. It is sculpted with a net-like head covering joined together with sculpted beads. A covering descends from under the headdress to cover the back half of the neck. The headband is divided into four strips and begins above the right ear, extending around the entire head. A short strap descends from either side of the head to the ear. The ear ornaments are complex and are larger at the front of the ear than at the back. The face is that of an ageing male with the forehead creased in a frown, wrinkles under the eyes, sagging cheeks and deep creases on either side of the nose.

http://www.mna.inah.gob.mx/index.php?option=com_sppagebuilder&view=page&id=4894

Olmec Head

US Wool Knit Cap, known as "Jeep Cap" since it was often worn by Jeep drivers. essentially a beanie with a brim. 
The M1944 Goggles are the Army-issue variant of the Air Force pattern B8 Goggles (issued since 1943). 

Goggles model is originally an 1974 SWDG Model made by **Olmo Potums** as part of their CVC helmet model ( https://sketchfab.com/3d-models/combat-vehicle-crewman-cvc-helmet-vietnam-era-c1516dc3d0ea420b9246334a94e5681e ) I've changed the straps and edited  the overall model to be more accurate to the 1944 pattern, also created a new texture and UV.

References:
https://www.wwiiimpressions.com/products/200
https://blog.atthefront.com/us_images/head/jeep-cap-main.jpg
https://www.sparks-military.com/en/helmet-and-attachments/730-us-dust-goggles-m-1944.html

M1941 Wool Knit Cap w/ M1944 Goggles

1915, Świątniki Górne, Poland
The Marcin Mikuła Locksmithing Museum in Świątniki Górne

https://muzea.malopolska.pl/en/objects-list/130

The presented box is the so-called putnia box. It was designed for carrying padlocks by salesmen called putniorze. They walked from village to village with putnia boxes on their backs and they sold famous products of padlock makers from Świątniki Górne. Such boxes were closed from above with a wooden lid by means of a staple and, of course, a padlock. On the sides of a putnia were metal handles for comfortable handling when raising and putting it on the back. A padlock box had sackcloth straps, often fastened together while carrying to facilitate movement.

RDW MIC, Małopolska’s Virtual Museums project

3D Model  elaboratione done by Stanisław Ogarek

"Putnia" box

***Ablasstruhe***

*16. Jh.* 

*Eisenplatten mit Bändern beschlagen, geschmiedetes Deckelschloss mit fünf Verriegelungen*

*42 × 75 × 47 cm*

> Stiftung Luthergedenkstätten in Sachsen-Anhalt

Zur Verwahrung der eingesammelten Ablassgelder wurden robuste und verschließbare Kassentruhen benötigt.
______________________

***Indulgence Chest***

*16th century* 

*Iron plates studded with straps, forged lid lock with five bolts*

*42 × 75 × 47 cm*

>Luther Memorials Foundation of Saxony-Anhalt

Robust and secure lockboxes were needed in order
to store the money that was collected from
the sale of indulgences.

---
Literature: Kuschel, Franziska, ' Indulgence Chest', in:  Harald Meller et al. (eds.), Martin Luther. Treasures of the Reformation. Dresden 2016, No. 125

Ablasstruhe / Indulgence Chest

English Archer Helmet, 15th ct., 1.6 mm steel. This particular helm is based not on what the nobles might have worn, but instead, on what the typical troop would have favored, possessing a straight-forward design that is both effective and protective, being shaped similarly to a barbute, of later 15th century Italian descent. It is made entirely from 16 gauge steel and features rivets about the skull-cap, as well as protection on the sides and back of the head and face, while leaving the front open, so as to not interfere with an archers vision or draw. The interior of the helmet also features a leather liner with an adjustable chin strap, which helps to make the helmet all the more comfortable and easy to wear. The helmet is based entirely on a historical piece, which is held in the Royal Armouries, in Leeds, England.

This model is a part of the Callectable Item Pack for Unreal Engine 4.

Helmet - Archery

Clean Version of my plague doctor mask. (**Bloody version**: https://sketchfab.com/3d-models/plague-doctor-mask-bloody-d7878cffb0d2444298ec0d24dc266da3)

The typical mask had glass openings for the eyes and a curved beak shaped like a bird's beak with straps that held the beak in front of the doctor's nose. The mask had two small nose holes and was a type of respirator which contained aromatic items. The beak could hold dried flowers (commonly roses and carnations), herbs (commonly lavender and peppermint), camphor, or a vinegar sponge, as well as juniper berry, ambergris, cloves, labdanum, myrrh, and storax. The purpose of the mask was to keep away bad smells, such as the smell of decaying bodies. The smell taken with the most caution was known as miasma, a noxious form of "bad air". This was thought to be the principal cause of the disease.

Plague Doctor Mask

Eilean Donan (Scottish Gaelic: Eilean Donnain) is a small tidal island situated at the confluence of three sea lochs (Loch Duich, Loch Long and Loch Alsh) in the western Highlands of Scotland, about 1 kilometre (5⁄8 mi) from the village of Dornie. It is connected to the mainland by a footbridge that was installed early in the 20th century and is dominated by a picturesque castle that frequently appears in photographs, film and television. The island's original castle was built in the thirteenth century; it became a stronghold of the Clan Mackenzie and their allies, the Clan MacRae. However, in response to the Mackenzies' involvement in the Jacobite rebellions early in the 18th century, government ships destroyed the castle in 1719. The present-day castle is Lieutenant-Colonel John Macrae-Gilstrap's 20th-century reconstruction of the old castle. [wiki]

Experimental vr, reconstructed solely from found drone footage, 2x8K  textures.

Eilean Donan Castle

The rifle slung on a strap is a single-barrelled, smoothbore, 12-gauge, percussion cap hunting weapon. The stock is made of sycamore wood and is hand carved. The carving depicts a dragon holding the edge of a stock in its mouth; nine teeth are visible. The banded part of the dragon’s body blends with the lock. In the 2nd half of the 19th century, the rifle was made, according to a factory pattern, by Wojciech Kułach, aka Wawrzyńcok, who was from Gliczarów. It was taken from a poacher named Bukowski-Tyrała from Kościelisko by the decision of the board managing the Zakopane estates of count Władysław Zamoyski. In 1931, the shotgun was purchased for the Tatra Museum from the collection of Marian Adam Liberak (1890–1931). He was a fan of folk art from Podhale, a journalist and forester, and a forest district manager in the Tatra Mountains in the 1920s.

The Dr. Tytus Chałubiński Tatra Museum in Zakopane

https://muzea.malopolska.pl/en/objects-list/1788

Inventory number:
E/2707/MT

Shotgun

Polaroid brand instant camera. The camera with ultrasonic controlled autofocus (Sonar System) has a 3 glass lens and a flash controlled by the automatic exposure. Various settings can be made on the back. On the left side there is a holder strap. The viewfinder showed the correct exposure even back then. The camera was built in the years 1986 to 1992. Made in UK.

Sofortbildkamera der Marke Polaroid. Die Kamera mit Ultraschall gesteuertem Autofokus (Sonar System) verfügt über ein 3 linsiges Objektiv und einen durch die Belichtungsautomatik gesteuerten Blitz. Auf der Rückseite können verschiedene Einstellungen vorgenommen werden. An der linken Seite befindet sich ein Halterriemen. Der Sucher zeigte damals schon die korrekte Belichtung an. Die Kamera wurde in den Jahren 1986 bis 1992 gebaut.

Polaroid Image System/Spectra

The presented object is a trzos belt – a wide leather belt with a pocket for storing money and documents. It was made in the 2nd half of the 20th century by a Romani saddler near the Romanian city of Brasov (Braşov in Romanian).
The belt was made of a double-folded strip of leather; at the upper edge there is an additional narrow pleat. It is fastened with 4 metal buckles, through which short straps with punched leather eyelets are threaded (5 in each strap). The end of each strap can be additionally fixed by threading it through a belt loop in a vertical leather belt (7 cm wide) attached to the trzos belt with 3 pairs of brass rivets.

Inventory number:
MT-E/3079
District Museum in Tarnów
Time of creation: 2nd half of 20th century
Place of creation: Braszów (Romania)

https://muzea.malopolska.pl/en/objects-list/1282

Belt – “trzos”

A photorealistic 3D model of a blonde woman with blue eyes, her hair pulled back in a high bun and a long ponytail. She wears a white lace-up corset with metal eyelets and straps, and a white thong. Another model wears white ribbed knee-high socks. The figure is seen from the side, posing on her hips, with a gentle smile on her face. The background is a simple, neutral gray wall, illuminated by soft studio lighting.

Lace-Up Confidence

Masterpiece Arms 930T Mac 11 style smg with forestrap.

MPA 930T

Bring a touch of rugged authenticity to your historical or fantasy environments with this medieval bed set. This set features two distinct pieces: a heavy-duty adult frame and a matching smaller child’s bed, perfect for peasant dwellings, barracks, or rustic inns.

Key Features:
Handcrafted Aesthetic: Weathered dark wood frames with realistic metal strap reinforcements.
Period Accurate Materials: Includes thin, realistic straw mattresses and coarse gray wool blankets.
Optimized for Games: High-quality textures with realistic fabric wrinkles 

Versatile Use: 
Ideal for RPGs, survival games, or architectural visualizations.

Technical Details:
Metallic/Roughness
Included: 1x Large Bed, 1x Small Bed

F_Medieval Rustic Bed Set - Large & Small

**genereted on https://3d.hunyuanglobal.com/assets**

Strappy platform stiletto sandals

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/GE6NsR](https://www.meshy.ai/s/GE6NsR)

Polka Dot Strapless A-line Dress

A dark hooded assassin wearing worn black leather armor with multiple straps and small metal buckles. His face is fully hidden in the depths of the hood, revealing only darkness. Standing in a calm, neutral pose with long leather boots and subtle stitched armor details, this model conveys stealth, mystery, and a menacing presence. Perfect for stealth games, dark fantasy worlds, or cinematic scenes.

Shadow Leather Assassin Model

A sharp-edged, low-fidelity warrior built from clean geometric planes. He wears a structured leather gambeson with visible strap details and a simple iron claymore strapped to his back. His silhouette is rugged and functional, balancing a minimalist face with a stout, heroic posture.

Asset Library

About These Assets