**CC-Attribution-NonCommercial**

Based on a scan of a replica of the "Mayflower" ship, processed by @spogna and available [here](https://skfb.ly/6u8T6).

Like in the [Mosquito in Amber](https://skfb.ly/6xWCO), most of my attention was spent on normal maps, roughness and refraction settings to try to make this model as realistic as possible.

I actually had to create a secondary internal surface for the bottle, and also relied on clear coat options for the glass material in order to try to give the model a feeling of thickness. 

To try to get the opacity right, I used refraction on the outer layer (normals offset checked), and alpha-blending on the inner one.

All of the modeling was done with Blender, but the critical part for the model aesthetics relies on Sketchfab materials and post-processing.

<br>
>
> Another ship in a bottle
> 
> Has got no place to sail
> 
> To see the waves getting darker every hour
> 
> The stars have lost their power
> 
> In the sky
> 

<br>
**Beck**, *Ship in a bottle*.

Ship in a bottle

My 3Dprint experiment at 1:6 scale. 

- This is Low Res Model, Just for design preview. 
Higher Res files with sample 3Dprinted posted on my 
[Thingiverse](http://www.thingiverse.com/thing:1946986) and [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle. 

- Need 2 screw to fix feet on stand base. 
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store. 

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length. 
Hard wire maybe work. I use small wood nail (head clipped) 

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater) 

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

*note* Freshy (เฟรชชี่) is the word Thai people call the university fresh men or the 1st year student.

Freshy Girl 3D Printable Figure

My personal character FanArt practice & 3Dprint experiment. 

![some gif](http://i.giphy.com/3oz8xzqr3KtMNdKLDi.gif)

- Series [ Love Live! Sunshine!!](http://love-live.wikia.com/wiki/Love_Live!_Sunshine!!)

- Character [Watanabe_You](http://love-live.wikia.com/wiki/Watanabe_You) 

- Costume [Aozora_Jumping_Heart](http://love-live.wikia.com/wiki/Aozora_Jumping_Heart)

[Hi-res 3Dprint files posted on my Thingiverse](http://www.thingiverse.com/thing:1953480) 

- Design to print in 1:6 scale with 0.4mm nozzle. 

- Max clothes thickness are 1.2mm. 

- Use screw and pin to assemble. You can 3Dprint as size ref and buy some at hardware store. 

- [More poses](https://skfb.ly/YxXY)

- Other costumes [01](https://skfb.ly/X8vJ) , [02](https://skfb.ly/VsCU)

- [WIP archives Here](https://www.facebook.com/Johnnie3Dtalk/photos/?tab=album&album_id=1123363244443452) 

- [twitter post](https://twitter.com/wiriyapol/status/806428103215976448)

Yousoro! 青空 Jumping Heart [3Dprint]

**Acheulean hand axe**

Location: Abbeville, France.

Period: Lower Paleolithic (before 300,000 years ago).

Material: flint.

Dimensions: length, 167.0 mm; width, 100.9 mm; thickness, 41.7 mm.

Notes: Catalog no. 518a2.  This specimen is part of a larger collection of artifacts that was acquired in 1929 by James Bell Bullitt during a tour of western Europe and later donated to the University of North Carolina.  Specimen resides in the North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Kathleen Brock.

Acheulean Hand Axe (518a2)

Back: Relief of the Bodhi tree and an empty dias with Buddhapada on the step, flying celestials above and kneeling worshippers on each side. 

Front: Relief depicting a stūpa with a figure of the Buddha standing at the entrance; about the dome of the stūpa flying celestials, some playing instruments. On the dome are relief panels depicting the Gift of Sujātā, the Conversion of Nanda, the First Sermon, the Great Departure, the Birth of the Buddha and Māyā's Dream.

Height: 124.37 centimetres
Width: 86.25 centimetres
Thickness: 12.5 centimetres
1st Century BC (obverse face) 
3rd Century  (reverse face)

COL entry:  http://bit.ly/2cSDUtK

Produced from 410 full resolution photographs taken by Thomas Flynn with a Canon G7x. Model processed by Daniel Pett.

[![DOI](https://zenodo.org/badge/99800839.svg)](https://zenodo.org/badge/latestdoi/99800839)

Amaravati double-sided relief

Repositorio de modelos 3D de Ddiaz Design

![](https://storage.googleapis.com/kuhl_stateless/2022/07/20180807Kuhl_WRX13-e1657096767306.jpg)

Version 2 VAB-GT II Aero Body Kit (FRP)

Aggressive aero kit to be attached to WRX STI & S4. A total of 7 items are lined up to create a WRX full of racing taste. Although the front diffuser is a simple style that is attached to the bottom of the genuine bumper, it is extended forward to create a sporty silhouette. Considering the extension to the front, the height is secured by keeping it 20mm lower than the genuine bumper. Achieves the thinnest wall thickness while ensuring high strength.

Instagram del proyecto: https://www.instagram.com/ddiaz.design/

Paypal Donations: https://paypal.me/sergiodd

Based on a CSR2 3d model

Credits: https://www.facebook.com/p/GM25-100042237200164/

Rims: @jonver87

2018 Subaru WRX KUHL Version 2 VAB-GT II

The **E-75 “*Standardpanzer*”** was intended to replace the Tiger II tank. For ease of manufacture, the vehicle was to be built on the same production lines as its predecessor, and share as many components as possible.

On paper, the E-75’s upper front plate was angled at **60 degrees** (compared to 55 for the Tiger II) Drafts showed that the upper front plate was meant to be **150mm** for the E-75, increasing the effective thickness to around **300mm**. Statistics of the turret was vague however, some proposed that the E-75 uses an enlarged Tiger II Krupp turret, others believed it was a completely new design.

**Sadly, not a single E-75 sample was ever built.**

The **E-75 BLM (*Besondere Leistung Modernisiert*)** is the main battle tank variant of the original E-75 in **an alternative timeline**. It features **explosive reactive armour (ERA)**, **modular composite armour** on the turret and a **thermal sight** for the gunner.

E-75 BLM

This is one of my newer laptops within my imaginatory laptop series Manhattabook. This is a newer series compares to my previous models. However, like my previous models, this laptop is also (loosely) based on a MacBook Pro. This is the Zone 3. Zone is the flagship lineup of Manhattabook. I’ll get to the specs soon, but as you can see from the insane thickness, it’s VERY powerful.

[SPECS]

I wont add comparisons bc im too tired 4 research lowk

* CPU: ZonePU RD GT1x 10Core @ 4.1GHz
* GPU: ZonePU DECA 16GB 
* 32GB DDR5 @ 4900Mhz
* 2TB NVMe M.2
* 4K Dynamic AMOLED 2X @ 240Hz and 1900 Nits "XDR"
* 4x 6000RPM 2.9" Fans
* 17,000 mAh Li-Po battery @ 200Whr
* 5.1 ZoneSU-R Surround Sound
* 3.4KG
* Imagined Price: 4199.99$


t’s not an MSI Raider/TITAN but it is much thinner, modern and sleek.

Credit me in a VISIBLE and ACCESSIBLE part of your project.

Thanks!

2027 Manhattabook ZONE 4

For complete workflow compatibility, we recommend downloading the Original format.The converted file is intended exclusively for browser preview. In the Original format, the following are fully preserved:✔ native scene structure✔ all materials without simplification✔ accurate texture maps✔ proper object namingIf you plan to use this model in production, choose the original version.Interior doors name Forum height 2000 mm Width 800 mm Thickness 34 mm.

Door Name Forum Color Venge

17th-century recumbent O'Madden graveslab measuring 1.98m long by top Wth 0.76m by base width 0.71m by thickness 0.13m, in the chancel of Portumna Dominican Friary Church (GA127-019----), Co. Galway. Floriated tapering graveslab has Latin cross with fleur-de-lis terminals rising from a stepped base carved in false relief. A central lozenge  frames a six-pointed star/rosette. A triskele is visible in the terminal of the right arm of the cross. Above the cross there is an I H S Christogram with Latin cross rising from the crossbar of the H.  An inscription beneath the base is in Latin. Within the frame around the sides and base of the slab another inscription indicates that this is a memorial slab to the Coghlan and Madden family dating to 1648.  Hic est Tumulus Corneil coglin et unctae maddin uxor seiuset successorum pro quibus orate pro april 1648 - This is the Mound of Cornelius Coghlan and ?? Maddin, his wife, his successors, for whom pray for April 1648. For more details visit: https://tinyurl.com/yn9ksxm3

Portumna Abbey Graveslab (GA127-019004-)

Late Bronze Age poppy headed fine ware cup found at Must Farm, Peterborough.

Weight: 64g
Rim Diameter: 5.3cm
Base Diameter: 1.8cm
Height: 6cm
Thickness: 3mm
Fabric: Sand
Context: 376

Accession Number: PETMG:2026.04.MUS06/15.P41

© Images produced by Peterborough Museum and Art Gallery. Licensed under Creative Commons Attribution 4.0 International ([CC BY 4.0](https://creativecommons.org/licenses/by/4.0/))

P41 PGK Must Farm Poppy Headed Fineware Cup

Back: Relief of the Bodhi tree and an empty dias with Buddhapada on the step, flying celestials above and kneeling worshippers on each side.

Front: Relief depicting a stūpa with a figure of the Buddha standing at the entrance; about the dome of the stūpa flying celestials, some playing instruments. On the dome are relief panels depicting the Gift of Sujātā, the Conversion of Nanda, the First Sermon, the Great Departure, the Birth of the Buddha and Māyā’s Dream.

Height: 124.37 centimetres Width: 86.25 centimetres Thickness: 12.5 centimetres 1st Century BC (obverse face) 3rd Century (reverse face)

A drum slab carved in limestone with the four events related to the Buddha’s birth: Māyādevī’s Dream (top right); the Interpretation of the Dream attended by the dīkpāla-s (top left); the Birth of the Buddha attended again by the dīkpāla-s (bottom right); the Presentation of the Buddha to the caitya of the Śākyas (bottom left).

Height: 157.5 centimetres Width: 96.25 centimetres Thickness: 14 centimetres

COL: RRI1193

Drum slab

The E-75 "Standardpanzer" was intended to replace the Tiger II tank. For ease of manufacture, the vehicle was to be built on the same production lines as its predecessor, and share as many components as possible.

On paper, the E-75's upper front plate was angled at 60 degrees (compared to 55 for the Tiger II) Drafts showed that the upper front plate was meant to be 150mm for the E-75, increasing the effective thickness to around 300mm. Statistics of the turret was vague however, some proposed that the E-75 uses an enlarged Tiger II Krupp turret, others believed it was a completely new design.

Sadly, not a single E-75 sample was ever built.

The E-75 BLM (Besondere Leistung Modernisiert) is the main battle tank variant of the original E-75 in an alternative timeline. It features explosive reactive armour (ERA), modular composite armour on the turret and a thermal sight for the gunner.

This is the negative press mold generated directly from the medallion relief for ceramic forming. 
It preserves the full Divyadvāra geometry as an inverted cavity, using the same 120×240 polar base and the same closed manifold topology, but transforms the positive relief into a manufacturable stamping volume through z inversion with floor thickness 0.5, wall clearance 0.08, and a slightly thicker support body. In the script, the mold is not sculpted by hand: it is computed from the finished relief, re-extruded, closed, and exported as a single watertight genus-0 mesh. The material logic is intentionally neutral, with a warm plaster-like grey gradient for readability. 
Verified mesh: 57,170 vertices, 114,336 faces, watertight, χ=2.

Generated by PAPP Framework.

Divyadvara Tile Mold | PAPP

This piece is a one-stroke symbolic knot converted into a watertight tube mesh, where a continuous path is lifted into 3D and woven with explicit crossing logic. 
Generated, not hand-modeled: the Ankh starts as a gate-constrained one-stroke path on a 30-grid symbolic domain, then becomes a Catmull–Rom ribbon and a 10-sided tube via parallel-transport framing and z-lift weaving. Its uniqueness is the phi-ratio crossbar fused to an oval loop and vertical stem in one continuous watertight band.
The Ankh domain combines an oval loop, a vertical stem, and a phi-ratio crossbar into a single spatial structure, keeping the ancient Egyptian silhouette readable while giving it the thickness and continuity of knotwork. 
The result feels halfway between emblem, pendant, and ceremonial object: an Egyptian cross of life rebuilt as a braided volumetric form instead of a flat sign.

Generated by PAPP Framework.

Ankh OSG | PAPP

One Hand Book Holders v2.1 => The thickness has been increased from 5mm to 10mm. v3.1 => The thickness has been increased from 3mm to 10mm. v4.1 => The thickness has been increased from 3mm to 10mm. If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

One Hand Book Holders v2 to v4

Armature Holder features three slots, designed to accommodate glass panels with thicknesses of 10.24 mm, 8.24 mm, and 6.24 mm, providing a secure attachment point for armatures. Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

Armature Holder

I’ve designed a 3D model of a scratcher, which includes various components. It features a pin for scratching that attaches to the head part. Additionally, there are sticks that also attach to the head, and a butt piece that connects to the back of the stick. The sticks can be extended to any desired length, and the head can hold up to 10 pins for optimal scratching functionality. Update: Version 2 In version 2, major issues were resolved, including adding tolerance to improve fit. Previously, parts were set with zero tolerance, which prevented the gears from aligning properly. Additionally, the thickness of the parts was increased from 30 mm to 35 mm, and the pin holes were slightly widened to ensure smoother insertion. For assembly, please apply adhesive to secure all parts firmly. If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

Modular Scratcher(Updated)

2 brand new free Easter egg twist fidgets  Choose between the twisted egg or the colored egg… or both!  Fully print in place with no support required and no brim necessary with zero infill for little waste, both are suitable to fit on any FDM printer  Highly addicted and satisfying to fidget, it fits perfectly in all hands and is very simple to print  By request I made these 2 fun fidgets from the awesome original Easter egg storage pots from last Easter, now converted into these fun stress relieving fidgets  Super simple to print with zero infill, supports or brim with just Arachne walls recommended  Simply make sure your filament is calibrated and choose your fidget  Troubleshooting  For anyone who has difficulty loosening the joints please ensure your filament is dry and calibrated, ensure all supports are cleanly removed - each type of filament and brand can extrude at slightly different thickness which can lead to the joints sticking, this can be easily fixed however  If your print is stuck you should be able to easily free the joints with some pressure & if any still remain stuck please carefully insert a scrapper blade into the gaps and wiggle until the sections slide freely, this doesn't take long but can be avoided with finely tuned filament - please check the handy fix video below  https://www.youtube.com/shorts/fyvbujJthiM

Twist Easter Egg Fidgets

Upgrade your desk setup with a stand that actually works—and looks great doing it. This is a functional, tested, and highly optimized 2-in-1 Laptop Stand featuring a striking blue and yellow contrasting color scheme (as seen in the photos, though you can print in any color!). Engineered with precision interlocking parts for a monolithic, rock-solid feel.  ✨ Unique 2-in-1 Design:This model is not just a stand; it's a versatile docking system. Its unique dual-geometry means that the same pieces enable two entirely different use cases:  1. Secure Vertical Dock Mode: The top rear slots are designed to hold your laptop closed as a space-saving vertical station (perfect for image_3, image_4, image_5, image_6). It is highly adjustable and even has specific slots to accommodate different thicknesses, from a thin MacBook Pro to a thicker gaming laptop. (See real photos of it holding both types).2. Ergonomic 20-Degree Riser Mode: The sloped, stepped front allows your open laptop to rest at various angled positions, creating a perfect ergonomic 20-degree tilt for comfortable typing and elevated screen viewing (perfect for image_7 through image_11). (See photo image_10 for a clear side profile of the tilt).🌟 Key Features:Tested & Proven Stability: It stands rock-solid with zero wobble, holding your valuable tech securely. (See images 4, 10, and 7 for real-world proof of stability).Optimized Airflow: The open structural design ensures maximum airflow under the laptop to prevent thermal throttling.Modular Construction: Quick and easy to assemble and disassemble for transport.Distinct Aesthetics: The contrasting colors and hexagonal core details give it a modern, clean, geometric look.

2-in-1 Laptop Stand

Fully rigged metallic spring. The armature is well organized and ready for intuitive bending stretching twisting and animation. You can quickly adjust the thickness of the thread with the corresponding shape key.

Spring Rigged

Interior doors Lait bluish brown color with door height 2000 mm Width 800 mm Thickness 34 mm.

Door Name Lait Color Bluish Brown

For complete workflow compatibility, we recommend downloading the original file.The viewer version is intended for web viewing only. In the Original format, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ accurate texture maps✔ correct object namesIf you intend to use the asset in a production environment, choose the Original format.Interior doors name Lilu color Pearl height 2000 mm Width 800 mm Thickness 34 mm.

Asset Library

About These Assets