Free 8K model - antique handcrafted wooden footstool with worn patina, rugged timber legs, visible tool marks and rustic farmhouse character.

Wooden Stool 02

This is a 3D animation of a large adult Timber rattlesnake (*Crotalus horridus*) from New England Reptile Distributors (https://new-england-reptile.myshopify.com/). 

The raw photogrammetry scan was created using the Beastcam Technology, and the ventral side was added from a different snake.  The full model was retopologized and rigged by animator Daniel Daye from the University of Massachusetts at Amherst.

The 3D model was created with the Beastcam technology.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 31A - Timber Rattlesnake

A quick experiment (edit: now a WIP for the [mechanimal challenge](https://blog.sketchfab.com/sketchfab-3d-modeling-challenge-mechanical-animals/) I just discovered!) with hard-surface, and I still have a long way to go !

This model is (more than) based on ["The Timber Beneath"](http://www.scoobasteve.co.nz/2013/01/the-timber-beneath.html), a wonderful sculpture by **Stephen Lambert**.

The different "organs" as well as textures were just randomly thrown around, but with some more practicing, I definitely think I'll start enjoying this style and find a nice designing/modeling/texturing workflow, to hopefully design original models some day.

Also, none of the mechanisms make any "mechanical sense", which is why I did not animate the model. As before, that could change with some more attention brought to details, and a little bit of thinking before acting :D

![](http://3.bp.blogspot.com/-lw3hJS-2rVk/UQEH9xQEHQI/AAAAAAAAAYg/Vr3p9L4T5bE/s1600/Shark_SLambert_03.jpg)

Mechanical Shark

Entre Poitiers et Limoges, il faut s'arrêter au "village étape" de Bellac. A voir parmis tant d'autres :
Les maisons anciennes des XVe et XVIIIe siècles, ainsi que quartiers et rues pittoresques : les maisons à pans de bois de l'ancien fort entourent l'église sur l'emplacement de l'ancien château dans un dédale de ruelles serrées.

![](https://upload.wikimedia.org/wikipedia/commons/thumb/3/39/Bellac_Vincou.jpg/220px-Bellac_Vincou.jpg)


Between Poitiers and Limoges, you have to stop at the "village stage" of Bellec. To see among many others:
The old houses of the 15th and 18th centuries, as well as quarters and picturesque streets: the half-timbered houses of the old fort surround the church on the site of the old castle in a maze of tight alleys.

Maisons médiévales, Bellac (87)

The Herculaneum boat was found during excavation work on the ancient shoreline of Herculaneum in 1982. It was found inverted on the shoreline, with the fore of the boat having been stoved in by other timber and debris from the eruption and completely destroyed. The hot pyroclastic flows that hit herculaneum carbonized the other 2/3rds of the boat and buried it, preserving it to this day. The vessel is 8.6 m long, 2.2 m wide, and about 85 cm deep. It was preserved up to the oarlocks, and most of the sternpost was preserved. After removing the boat from the shoreline, it sat in storage for awhile until a method was designer of flipping it over and excavating the inside. The boat is now on display at Herculaneum, along with other nautical equipment found on the shore including oars and a rudder fragment from other boats (but used here). The boat is yet to be fully published, the main resource for this reconstruction was an unpublished 2005 paper by Richard Steffy: https://tinyurl.com/mr2nzm7x

Herculaneum Boat - Roman Boat

This reconstuction of Gresham Castle is entirely speculative and is based on evidence from the Paston Letters and other documents of the time. No archaeological evidence is available other than the standing remains of the walls.

The documentary evidence shows that the house was a timber framed building and resembled a typical four bay construction of the period with a central hall and chambers either side.

It is unclear whether the walls and towers belong to the fortifications made by Sir Edmund Bacon or are the result of a major rebuild by the Pastons following the siege of 1448.

Gresham Castle reconstruction

The wreck is unusually well preserved for a ship built with clinker technique It was found in Stockholm archepelago by Niklas Ekström. It´s app 20 m long and 7,8 m wide. It also has its cargo still in place. There are a little over 30 barrels visible, mostly containing so called osmund iron. Barrels with tar, ash and butter is also found in the hold. The date of the ship is based on dendro. It date´s the wreck to 1540´s (provenance Stockholm) and has been repaired in the 1550´s (provenance, south of Finland). All dated timbers are pine.
The wreck has three masts and all it’s the rigging seems to be intact at the site. Blocs, deadeyes and the bowsprit i visible at the wreck site. Personal belongings, copper pot in the stove and som fabrics are also visible. 
Iron exports was then, and still is, one of Sweden’s most important exports but the knowledge of historic cargo ships, the trade routes and the quality of the iron is almost unknown. This wreck will be surveyd together with Jernkontoret 2021 and forward.

The Osmund wreck

Assets with different types of power poles, the models were created and textured with Blender and Substance Painter.
The models include concrete, wood and concrete-based timber posts.
Still in this same package, you find two types of transformers.
Models included:
- Round transformer;
- Square Transformer;
- Simple wooden post;
- Wooden pole with wire base;
- Simple concrete post;
- Concrete pole with wire base;
- Simple wooden post with concrete base;
- Wooden pole with concrete base and support for wires;
- Light fixture;
- Energy cable;
- Top post base;
- Large concrete pole with several luminaires.

You can use this template in your commercial projects, as long as you assign the credits to the author.

Powe Poles

![](https://bit.ly/3rRsqxS)
![](https://bit.ly/3jjIUts)

In May 2012, five sections of the hull of an armed Elizabethan merchantman were moved to Stoney Cove Dive Centre, some 400 years after it sank in the Thames Estuary. The site consists of a section of bow and 15m of the port side, as well as an anchor.

The ship is now part of a unique underwater museum display where it also serves to train the next generation of nautical archaeologists. 

Originally discovered in 2003 by the Port of London Authority, excavation was undertaken by Wessex Archaeology. The hull remains and associated artefacts, including iron bars, lead and tin ingots, pottery and leather were recovered together with 4 guns, one bearing the insignia 'TG' and the moulded emblem of a grasshopper, the mark of Sir Thomas Gresham (1519 - 1579). He was a financier and adviser to Queen Elizabeth.

Twelve tree-ring samples from the hull suggest that the timbers were felled in England after 1574. 

Photos: Martin Davies

The Gresham Ship - Stoney Cove, Feb 2013

Pre-concert video Fly

The Pula Arena (Croatian: Pulska Arena; Italian: Arena di Pola) is a Roman amphitheatre located in Pula, Croatia. It is the only remaining Roman amphitheatre to have four side towers entirely preserved. It was constructed between 27 BC and AD 68, and is among the world’s six largest surviving Roman arenas. The Arena was built between 27 BC and 68 AD, as the city of Pula became a regional centre of Roman rule, called Pietas Julia. The building is named after the sand (Latin harena) that once covered the inner, performance area. It was built outside the town walls along the Via Flavia, the road from Pula to Aquileia and Rome. The amphitheatre was first built in timber during the reign of Augustus (2–14 AD). It was replaced by a small stone amphitheatre during the reign of emperor Claudius. In 79 AD it was enlarged to accommodate gladiator fights by Vespasian and to be completed in 81 AD under emperor Titus. This was confirmed by the discovery of a Vespasian coin in the malting.

Anphitheatre Pula | Pula Arena | CROATIA

The model was made for the ETW mod Imperial Splendour. It serves as a city model for the town of Hannover.
In the model itself are many historical buildings which once were located (and are demolished today) in Hannover as well as several drafts which were never built. 

I tried to represent the division between the old town, coming from the middle ages on the right with timber-frame and Renaissance houses and the new town ("Calenberger Neustadt") on the left which was built in the 17th century and where the townhouses of the nobility stood.

Most prominent on the right is the Marktkirche (Market Church). Outside the actual town you can see the Nikolaikapelle (Nikolai chapel) with its graveyard. Today the Nikolaikapelle is a ruin.

City Model for Hannover

Old timber wharfs under Old Billingsgate Wharf, London.

1384 photos taken in September 2020 with a Sony a6000 and processed in Reality Capture.

Old Billingsgate Wharf

Das Freilichtgelände in Schwarzenbach besteht derzeit aus acht Gebäuden. Diese erlauben dem Besucher Einblicke in verschiedene Bereiche des keltischen Lebensalltags. Hier sieht man das Handwerkerhaus in Pfostenbautechnik mit Riegelwänden aus Eichenholz sowie den Speicherbau mit Blockwänden auf Schwellbalken in Fichte.

EN

The open-air museum in Schwarzenbach currently consists of eight buildings. These allow the visitor insights into different areas of Celtic everyday life. Here you can see the craftsmen's house built using the post and beam construction technique with timber walls made of oak and the storage building with log walls on beams in spruce.

[blog](https://celtovation.wordpress.com/)

[homepage](http://www.schwarzenbach.gv.at/Archaeologisches_Freilichtmuseum)

Schwarzenbach - houses with interior

The gatehouse entrance to St Bartholomew-the-Great, the oldest church in London. The gatehouse was originally the main entrance to the priory church before the western half was lost during the dissolution of the monasteries in 1536. A Tudor timber house is built above the entrance arch.

Date: 1123? (stone entrance arch), 1595 (timber house above)

https://www.historic-uk.com/HistoryMagazine/DestinationsUK/St-Bartholomews-Gatehouse/

471 photos taken in June/July 2019 and July 2020 and processe in Agisoft Metashape.
Roof texture partly repainted due to poor photography of that area.

St Bartholomew’s Gatehouse

A feature on the Thames foreshore halfway between the Angel Pub and The Leaning Tower of Rotherhithe. The feature is a circular hole in the hard material revealing various timbers. A chain lies across the feature.

565 photos taken in July 2020 with a Sony a6000 and processed in Reality Capture.

Bermondsey Foreshore Feature

A Grade I listed timber-framed building built in around 1520 in Aldeburgh, Suffolk, UK.

https://historicengland.org.uk/listing/the-list/list-entry/1269716

65 photos taken in August 2013 with a Sony NEX 3.

Moot Hall Aldeburgh

**1840s Whaling Brigantine - Cinematic Game Asset**

This is a high-fidelity, high-poly 3D reconstruction of a mid-19th-century Merchant Brigantine, specifically outfitted for the whaling industry. Designed for cinematic renders and high-end environments, this model features realistic PBR textures and historically inspired details.

**Key Features:**

Historical Accuracy: Features a blunt bow, heavy timber construction, and authentic 1840s rigging.
Deck Details: Includes a functional brick try-works (for processing oil) and four deployable wooden whaleboats hanging from side davits.
Textures: High-resolution (8k) weathered oak wood, aged copper plating below the waterline, and oil-soaked deck textures for a gritty, realistic look.
Technical Specs: Optimized for Unreal Engine 5; includes intricate hemp rope rigging and tattered cream canvas sails.

1840s Whaling Brigantine_GGMt

**1840s Hybrid Steam Brigantine - Industrial Paddle Steamer**

This high-fidelity 3D asset represents the mid-19th-century transition from sail to steam. A "hybrid" Merchant Brigantine, this model combines traditional rigging with early industrial steam propulsion, making it a perfect centerpiece for Industrial Era or Steampunk cinematic environments.

**Key Features:**
Hybrid Propulsion: Features authentic side-paddle wheels and a prominent central black iron smokestack with realistic coal soot staining.
Industrial Detailing: Heavy timber construction with weathered oak textures, complemented by aged copper plating below the waterline.
Cinematic Rigging: Intricate hemp rope rigging and cream-colored canvas sails with slight tattering, designed for high-end UE5 renders.
Gritty Realism: PBR textures include iron bolt details, oil-soaked deck planks, and atmospheric soot buildup around the industrial components.

1840s Hybrid Steam Brigantine_GGMt

Farmhouse. Possibly formerly a summer house for the abbots of Burton. Early C16 carcass remodelled in the mid C17 and late C19. Timber framed on stone plinth with closely-spaced uprights (parts replaced by brick) with diagonal struts to gables. Brick and lath and plaster infill panels; brick and sandstone ashlar side stacks to the east; tiled roofs. Large U-shaped plan, open to the south (the main prospect) with later additions against the western limb. Probably formerly of hall and cross wings layout, entered through a screens passage to the western side, but substantially altered to take a central porch and upper storeys. 

Created in RealityScan by Epic Games from 303 images in 00h:19m:29s.

Sudbury Gasworks Digital Imaging is a collaborative team of individuals working together for the benefit of the wider community to help record historic artifacts.

Please feel free to download and use this model. All we ask if that you like, leave a comment and give credit to the author Shiro Morturn.

Thanks

Sinai Park House - Drone Mapping

🏡•The Cozy Timber Cottage | Hand-Painted Diorama [ Free 3D Model ]
    
   Need the Game-Ready version?
 [ GET THE FULL GAME-READY ZIP ON FAB]
 
   [![GET IT ON FAB](https://files.catbox.moe/r8c4hc.png)](https://fab.com/s/6c32346f3eea)

 •Step into a world of whimsical charm with this stylized forest cottage. Every plank of wood and every needle on the pine trees was meticulously hand-painted to bring a warm, handcrafted soul to this 3D scene.

 •Plug & Play: The assets are exported using industry-standard formats, neatly packed into a single .zip file for an effortless setup.
Clean Structure: Fully organized directory with separate folders for textures and 3D files (FBX, GLB, USDZ), ensuring a smooth import process into any software.

•Craftsmanship: Designed with love by IGANIX ART, focusing on the harmony between nature and stylized architecture.
Optimized Experience: Perfectly balanced for smooth 3D viewing and real-time interaction.

Stylized Hand-Painted Diorama House - Game Ready

Model is of twings from Night with timber by NomNomNami.
Semi-Lowpoly (~12k)

the model can have their coat and scarf removed!
Expect a lot of jank...

Twigs (from Night with Timber)

Weathered Timber Post prepared as part of a lamp project.

PM me on liviu.jurca@gmail.com or leave a comment for free highpoly model,

Bollard head

Rayman Arena M  Timber Wood

License: **CC0**  
  

  
Plantae 植物界  
　Angiospermae / Magnoliophyta 被子植物門  
　　monocots 単子葉類  
　　　Poales イネ目  
　　　　Poaceae / Gramineae イネ科  
　　　　　Phyllostachys   
　　　　　　Phyllostachys reticulata マダケ

Asset Library

About These Assets